Instruction/ maintenance manual of the product KIT P/N 36939 Middleby Marshall
Go to page of 12
A MIDDLEBY COMP ANY Digital T emperature Controller (KIT P/N 36939) Installation, Programming and T roubleshooting Instructions Middleby Marshall Inc. • 1400 T oastmaster Drive • Elgin, IL 60120 • (847) 741-3300 • F AX (847) 741-4406 Middleby Corporation 24 Hour Service Hotline 1-800-238-8444 © 1997 Middleby Marshall Inc.
INST ALLA TION INSTRUCTIONS This manual provides instructions for conversion: from to Analog T emperature Controller (A), PN 28071-0012 (without high-limit and cool down function)................................ Analog T emperature Controller (A), PN 28071-0018 (with high-limit and cool down function).
Unpacking The Digital T emperature Controller was checked before leaving the factory . Inspect the shipping container carefully for evidence of improper handling during shipment. In case of damage, make an immediate claim to the parts distributor from whom the unit was purchased.
Installing the Digital Controller Step Procedure 1. Insert the Digital T emperature Controller into the same panel slot making sure the face of the controller is upright with the display on top and the push buttons on the bottom. 2.. Identify the two rectangular holes on top and bottom of the control case.
4 } 8 7 6 5 4 L2 L1 9 10 11 12 13 14 15 16 Connect To Connect To [13] [14] [15] [16] [1] [2] Remove From Remove From [5] [6] [L2] [L1] [G] 500 Not used on certain model gas and electric ovens.
5. Check to be sure the oven’s thermocouple is the latest version flange mount style verses the obsolete version. See Figure 4 below . The obsolete thermocouple is not compatible with the latest tem.
6 PS200 Gas Oven, 208-240V , 50/60Hz, 1 Ph, 3W ...............................................................Figure 5 PS200 Gas Oven, 200V , 50/60Hz,1 Ph, 2W (Export Only)................................................Figure 5 PS200 Gas Oven, 208V , 50/60Hz,1 Ph, 2W (Export Only).
7 Figure 7 - Wiring Diagram Showing Electrical Connections (Refer to T able 2) Figure 8 - Wiring Diagram Showing Electrical Connections (Refer to T able 2) Figure 9 - Wiring Diagram Showing Electrical.
Programming After the Digital T emperature Control has been properly installed and wired, it is ready to be programmed for either the standard on/off cycling gas solenoid/electric heating system, or the modulating gas valve system.
Digital Temperature Controller PN 36056 Service instructions Push the lock key and the service key together to reach SP LOK, then use the service key to step through the other functions listed below. Use the arrow keys to change the function settings.
SERVICE KEY: Service use only SET PT: Lit when controller is displaying set point temperature. UP and DOWN arrow keys: Used to change the set point. Press UNLOCK & SET POINT keys simultaneously to unlock set point, UP & DOWN keys will now function for 60 seconds.
Diagnostic Error Messages The controller runs background tests during normal operation. If a problem with the background tests occurs, an error message is shown (flashing) in the Display .
An important point after buying a device Middleby Marshall KIT P/N 36939 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Middleby Marshall KIT P/N 36939 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Middleby Marshall KIT P/N 36939 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Middleby Marshall KIT P/N 36939 you will learn all the available features of the product, as well as information on its operation. The information that you get Middleby Marshall KIT P/N 36939 will certainly help you make a decision on the purchase.
If you already are a holder of Middleby Marshall KIT P/N 36939, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Middleby Marshall KIT P/N 36939.
However, one of the most important roles played by the user manual is to help in solving problems with Middleby Marshall KIT P/N 36939. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Middleby Marshall KIT P/N 36939 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
