Instruction/ maintenance manual of the product 900 MHz Series Microtek
Go to page of 12
Operations manual MiniLink® Data 900 and 2400 MHz Series MicroTek Electronics, Inc. 25691 Atlantic Ocean Drive, Suit e B-3; Lake Forest, CA 92630 Technical Support: 888-366-4276 www.
FCC NOTICE This equipment has been tested and found to comply with the limits of a Class B device, pursuant to PART 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interferen ce.
INDEX S E C T I O N P A G E # FCC NOTICE ------------------ --------------------------------------------- -- ( i ) INDUSTRY CANADA NOTICE ----------- --------------------------- --- ( i ) QUICK START .
Q UICK S TART G UIDE MicroTek Electronics, Inc. recommends that al l equipment be bench tested before being installed onsite. This test will ensure that all com ponents of your application are functioning properly. D ATA T RANSCEIVER S ET - UP 1. Remove each Transceiver from the box and a ttach its omni-directional dipole antenna.
P RE -I NSTALLATION R EMINDERS The information on the Quick Start Guide is in tended for ease of use and application, the following reminders will help to ensure your sa tisfaction with MicroTek products and service. 1. Read through this manual before bench testing and installation 2.
M INI L INK 900 AND 2400 MH Z D ATA T RANSCEIVERS TRANSCEIVER DESCRIPTION The MiniLink Data 900/2400 transceivers are eith er point-to-point or point-to-multi-point units. Software is provided to configure each radio to match the configurations of your camera and controlling device.
TRANSCEIVER OPERATION HOW TO SET UP EACH TRANSCEIVER 1. LOCATION Each Transceiver is designed to be pl aced on a flat surface for stab ility. The transceivers are not weat herproof and should be placed indoors or in an environmental enclosure if used outdoors or in a harsh environment.
TRANSCEIVER OPERATION (Continued) 1. Set-up Tab This screen is used to set the PC Serial Port to interface with the MiniLink Data 900 or 2400 MHz Transceiver. The parameters in th is tab must match the PC Serial Port Parameters for communication to be established.
TRANSCEIVER OPERATION (Continued) • Avoid clicking on “Restore Module Defa ults” as Multiple Default-Resets could result in a software lockout, requiring a f actory reset of the Transceiver unit(s).
TRANSCEIVER SPECIFICATI ONS RF SECTION Power Output 140 mW (900 MHz), 50 mW (2.4 GHz) Transmitting Frequency 900 to 928 MHz 2.4000 to 2.4835 GHz Modulation Frequency Hopping Spread Spectrum Channel Capacity 7 hop sequences share 25 frequencies Over Air Baud Rate Up to 19200 bps FCC ID OUR9XSTREAM (900 MHz) OUR-24XSTREAM (2.
TROUBLESHOOTING PROBLEM SUGGESTION Camera does not respond when PTZ control functions are moved No wireless control should be the only pr oblem that would be related to the MiniLink Data transceivers. For all other problems, refer to the operations manual for other equipment that is being used.
WARRANTY INFORMATION M ICROTEK L IMITED W ARRANTY MicroTek Electronics extends the follo wing LIMITED WARRANTY to t he original owner/purchaser of this product: 1) If, within two years after date of i.
An important point after buying a device Microtek 900 MHz Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Microtek 900 MHz Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Microtek 900 MHz Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Microtek 900 MHz Series you will learn all the available features of the product, as well as information on its operation. The information that you get Microtek 900 MHz Series will certainly help you make a decision on the purchase.
If you already are a holder of Microtek 900 MHz Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Microtek 900 MHz Series.
However, one of the most important roles played by the user manual is to help in solving problems with Microtek 900 MHz Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Microtek 900 MHz Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
