Instruction/ maintenance manual of the product SP616R MicroNet Technology
Go to page of 14
Quick Installation Guide EtherFast 10/100Mbp s Switch Model No.: SP616R Website http://www .micronet.info.
1 Introduction Micronet SP616R provides powe rful, high-perform ance Ethernet switch, with all ports cap able of 1 0 and 100Mbps auto-negotiation operation. S tore-and-for war d switching mode promises the low latency plus eliminates all the network errors, including runt and CRC error packet s .
2 Package Content s Before you start installing the device, verify the following items are in the package: y One SP616R Ethernet Switch y Quick Installation Guide y One power cord y Rack-Mount accessories Features y Complies with 10Base-T/100Base-TX specifications of the IEEE802.
Physical Description SP616R front view SP616R rear view Please refer to the following table for LED definition LED Status Operation S teady Green Power is on Power Off Power is off S teady Green A val.
Inst allation Micronet SP616R Switches do not r equire software configuration. Users can immediately use any of t he features of this product simply by attaching the cables and turning on the power . Rack Mounting The switch can be mounted in an EIA standard 19-inch rack, which can be placed in a wiring closet wi th other equipment.
5 speed (10/100Mbps) and mode (Full/Half Duplex). If the attached device does not support auto-negot iation or has auto-negotiation disabled, an auto-sensing process is initiated to select the speed and set the duplex mode to half-duplex.
Network Application 6.
7 Specifica tions Standa rd IEEE802.3, IEEE802.3u IEEE802.3x : Flow Control Interface 16 * RJ-45 ports (10/100Mbps) Cable Connections 10BASE-T : Cate gory 3, 4, 5 UTP/STP 100BASE-TX: Category 5 UTP/STP Network Speed 20M(Full duplex)/10M(Half duplex) 200M(Full duplex)/100M(Half duplex) Features Auto-negotiation, Auto Uplink Switch Fabric 3.
FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference when the equipment is operated in a commercial environment.
CE Mark W arning This equipment complies with the requirements relating to electromagnetic compatibility , EN 55022 class A for ITE, the essential protection requirement of Council Directive 89/336/EEC on the approximation of the laws of the Member S tates relating to electromagnetic compatibility .
10 Appendix A. Fast Ethernet T echnolog y The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times.
11 Switching is a cost-effective w a y of increasing the total network capacity available to users on a local area network. A sw itch increases capacity and decreases network loading by dividing a local area network into different segments. Each segment has it s own bandwidth and it does not compete with others for network transmission capacity .
the network. Switch, on the other hand, is less expensive, easier to setup, and practically maintenance free, which make it an ideal solution to today’s local area network congestion problems. C. RJ-45 Pin A s signment According to the EIA/TIA 586B standard, the color sequence of Cat.
13 Contact Media Direct Interface Signal 1 TX + (transmit) 2 TX - (transmit) 3 Rx + (receive) 4 Not used 5 Not used 6 Rx - (receive) 7 Not used 8 Not used.
An important point after buying a device MicroNet Technology SP616R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MicroNet Technology SP616R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MicroNet Technology SP616R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MicroNet Technology SP616R you will learn all the available features of the product, as well as information on its operation. The information that you get MicroNet Technology SP616R will certainly help you make a decision on the purchase.
If you already are a holder of MicroNet Technology SP616R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MicroNet Technology SP616R.
However, one of the most important roles played by the user manual is to help in solving problems with MicroNet Technology SP616R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MicroNet Technology SP616R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
