Instruction/ maintenance manual of the product SP616DB MicroNet Technology
Go to page of 12
User ’s Manu al EtherFast 10/100M Smart Switch Model No.: SP616DB / SP624DB http://www .micronet.info.
Package Contents V erify y our package contain s the following items: z SP616DB/SP624DB 10/1 00 Mb ps Smart Switch z User’s Manual z Power Cord z Rack Ears with Screws and Rubber Foots Features Micr.
3 POWER This LED comes on w hen the sw itch is properly connected to power and turned on. TX/FX Push Button The push button is located at the right side of port 16 (SP616DB) or port 24 (SP624DB). Release this button to use RJ-45 port 16 (S P616DB) or port 24 (SP624DB), an d press this button to use the 100BASE-FX module.
Installation Preparing the Site Select the site that meet s the following require m ent s: Characteristic Requirement Temperature 32 to 104 ˚ F (0 to 40 ˚ C) Humidity Maximum relative humidity of 90%, non-condensing Condition At least 1.8 meters (6 feet) to the nearest source of electromagnetic noise Ventilation Minimum 3 inches (0.
5 Step 2: Remove the module from the static-free container. Step 3: Unscrew the cover pl ate of the expansion slot. (The slot for single-port module is loca ted at the right side of the switch.) Step 4: Remove the plate. (Keep it for future use in case you decide to remove this module later.
Switch Configuration Setting UP Console Port Connection SP616DB/SP624DB provide s o ne RJ-45 console port and a web-based interface, allow ing user s to configure and manage the switch remotely from web browser. 1. Connect UTP/STP cable to SP616DB/SP624DB’s con sole port.
Figure 8: Main menu System Change The System Change p arameters can be display ed by clicking the System Chan ge button in the left sub-menu. Figure 9: System Change z Switch Name: T ype a switch name and replace the current sw itch name with a new one.
IP Configuration Figure 10: IP Configuratio n z Refresh: Click the Refresh button and refresh back to the last saved IP Configurations. z IP Address, Netmask, Default Gateway: Y o u can see and change the IP Address, Netmask, and Default Gateway of the Ethernet Switch.
VLAN Figure 12: VLAN z VLAN: Click and choose the port s to be added into the VLAN gr oups. z Apply: Click the Apply button and apply the new settings of the VLAN groups.
T runk SP616DB: Figure 13: T runk of SP616DB z Disable: Click and choose the Disable to disable the Trunk Group 1 or T runk Group 2. z T runk Group 1: Click and choose the Port 1, 2 to be added into the T runk Group 1. z T runk Group 2: Click and choose the Port 9, 10 to be added into the T runk Group 2.
Save Configuration Figure 15: Save Configuration z Click Save Configuration . z Click the Ok or Cancel button to or not to save the configurations. Note: the Cancel button will discard any dat a you have changed since the last "Save" operation.
Specifica tions IEEE standard IEEE 802.3,10BaseT IEEE 802.3u,100BaseTX/FX Port SP616DB: 16 10/100 Mbps ports SP624DB: 24 10/100 Mbps ports Speed 200 Mbps full-duplex 100 Mbps half-duplex Dimension 440 × 207 × 44 mm rack-mount size Weight SP616DB: 1.
An important point after buying a device MicroNet Technology SP616DB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought MicroNet Technology SP616DB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data MicroNet Technology SP616DB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, MicroNet Technology SP616DB you will learn all the available features of the product, as well as information on its operation. The information that you get MicroNet Technology SP616DB will certainly help you make a decision on the purchase.
If you already are a holder of MicroNet Technology SP616DB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime MicroNet Technology SP616DB.
However, one of the most important roles played by the user manual is to help in solving problems with MicroNet Technology SP616DB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device MicroNet Technology SP616DB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
