Instruction/ maintenance manual of the product SIM 3 Meyer Sound
Go to page of 18
SIM ® 3 Remote Guide to controlling a SIM 3 Audio Analyzer r emotely over a network connection from a laptop SETUP GUIDE INTEGRA TION TOOLS.
© 2010 Meyer Sound. All rights reserved. SIM 3 Remote Setup Guide, PN 05.136.042.01 B The contents of this manual are furnished for informational purposes only , are subject to change without notice, and should not be con- strued as a commitment by Meyer Sound Laboratories Inc.
iii CONTENTS Section 1: Overview 1 What is SIM 3 Remote? 1 Section 2: Preparation 2 Acquiring the Software CD and X11 Utilities 2 Network Infrastructure / Har dware Err or Handling Change 3 Section 3:.
1 sim 3 remote st artup Guide SECTION 1: OVERVIEW WHA T IS SIM 3 REMOTE? SIM 3 Remote is an application that makes it possible to control SIM 3 har dware on a r emote computer via an Ethernet network.
2 section 2: prep ara tion ACQUIRING THE SOFTWARE CD AND X11 UTILITIES Before you get started you will need to download some files and you will need to have one blank r ecordable CD (CD-R) available to burn the Software CD. Meyer Sound Software CD File(s) Downloads: www .
3 sim 3 remote st artup Guide Network Infrastructure In order to setup SIM 3 Remote an Ethernet 100Mbps or faster network needs to be created. While it is much easier to have this set as a wired network SIM 3 Remote r eally becomes much more flexible when used in a wir eless network.
4 section 2: prep ara tion 4 Step 2: Use the up/down arrow keys to select “POST Err or Handling” Use the right/left arrow keys to change the setting to “Ignor e All” Step 3: Press <Escape> to r eturn to the Main Menu. Use the up/down arrow keys to select “Saving the Settings” and pr ess <Enter>.
5 sim 3 remote st artup Guide 5 Step 5: Use the up/down arrow keys to select “Exiting the System Setup Utility” Press <Enter>. Step 6: Press <Enter> while “Exit the System Setup Utility” is highlighted to exit the BIOS setup. The SIM 3 will now reboot with the new setting applied.
6 section 3: setup WIRELESS ROUTER SETUP 1. Enter the router basic setup page (r efer to router user guide) and set the following parameters: • Router IP address to 192.168.1.1 • Subnet Mask to 255.255.255.0 • DHCP Enabled • Router DHCP starting IP address to 192.
7 sim 3 remote st artup Guide 2. Go to the Wireless Setup / Basic Wir eless Settings page and set the following parameters: • Mode to G-only . (If both router and r emote computer are capable of 802.
8 section 3: setup 2. V erifythepropertiesoftheremotecomputer’ sEther netadapter .MakesureitissetforIPaddress:DHCP . Y oushouldhaveasimilardisplay: Windows OS X PHYSICAL SETUP WITH ROUTER 1.
9 sim 3 remote st artup Guide 3. Power up the SIM 3 machine and immediately insert the Software CD (See page 4) into the CD drive of the SIM 3 machine. This must be done the moment the SIM 3 is turned on. If the SIM 3 boots up as usual then the CD was introduced too late.
10 section 3: setup PHYSICAL SETUP WITHOUT ROUTER In order to operate a SIM 3 machine r emotely without using a wireless r outer connect the computer to the SIM machine with a CA T5 or better cable. Moder n computers automatically apply an internal crossover when necessary – if using an older computer please use a crossover cable.
11 sim 3 remote st artup Guide SECTION 4: ST AR TING SIM 3 REMOTE ST ARTING SIM 3 REMOTE (OS X – ALL PHYSICAL SETUPS) 1. Open the application X11 (Applications/Utilities/X11) 2. At the prompt bash-3.2$ type the following commands (all commands ar e case sensitive): bash-3.
12 section 4: st artinG sim 3 remote FIRST TIME SETUP (WINDOWS – ALL PHYSICAL SETUPS) Depending on your Windows version and security settings you may be prompted to confirm/allow some of the following actions. 1. Copy both Xming-6-9-0-31-setup.exe and PuTTY .
13 sim 3 remote st artup Guide ST ARTING SIM 3 REMOTE (WINDOWS – ALL PHYSICAL SETUPS) Once First Time Setup (see Page 13) is complete the normal startup procedur e is as follows: 1. Start Xming 2. StartPuTTY 3. Open the previsously saved session (Load/Open) 4.
14 section 4: st artinG sim 3 remote FREQUENTL Y ASKED QUESTIONS (F AQ) Q: Can SIM 3 Remote run without a SIM 3 machine? A: No! SIM 3 Remote is just a connection to the SIM 3 software inside a physical SIM 3 machine. Q: Can I have more than one simultaneous session of SIM 3 Remote using just one SIM 3 machine? A: No.
Meyer Sound Laboratories, Inc. 2832 San Pablo Ave Berkeley , CA 94702 T el: +1 510-486-1166 www .meyersound.com T : +1 510 486.1166 F: +1 510 486.8356 © 2010 Meyer Sound Laboratories, Inc.
An important point after buying a device Meyer Sound SIM 3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meyer Sound SIM 3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meyer Sound SIM 3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meyer Sound SIM 3 you will learn all the available features of the product, as well as information on its operation. The information that you get Meyer Sound SIM 3 will certainly help you make a decision on the purchase.
If you already are a holder of Meyer Sound SIM 3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meyer Sound SIM 3.
However, one of the most important roles played by the user manual is to help in solving problems with Meyer Sound SIM 3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meyer Sound SIM 3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
