Instruction/ maintenance manual of the product PSW-6 Meyer Sound
Go to page of 4
The tight response pattern of the PSW -6 helps to steer all frequencies away fr om the rear of the cabinet, eliminating much of the reverber ant noise traditionally associated with large scale full-range speaker arrays.
Sound pressure pr opagates from the front of the speaker using four front- loaded cone drivers and is steered away from the rear of the cabinet by two rear -mounted cone drivers. This is accomplished through a complex electrical response relationship between multiple amplifier channels and critical geometry between the front and rear tr ansducers.
No tes Acoustic al (ea ch loudspeaker) C o v er age PSW-6 SPECIFICA TIONS Oper ating F requency Range Phase Response Maximum SPL Dynamic Range 30 Hz – 125 Hz (-6 dB points) 32 Hz - 100 Hz ± 3 dB 1 ±50° 40 Hz – 130 Hz 2 140 dB @ 1 meter 3 > 110 dB Cardioid response pattern with > 15 dB fr ont-to-back ratio See polar plot data below 1.
T r ansducers Amplifiers Audio Input AC Pow er Physic al No tes PHY SICAL DIMENSIONS PSW-6 SPECIFICA TIONS (cont’ d) Lo w F requency T ype Output Pow er THD, IM, TIM T ype Connector Nominal Input L .
An important point after buying a device Meyer Sound PSW-6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meyer Sound PSW-6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meyer Sound PSW-6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meyer Sound PSW-6 you will learn all the available features of the product, as well as information on its operation. The information that you get Meyer Sound PSW-6 will certainly help you make a decision on the purchase.
If you already are a holder of Meyer Sound PSW-6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meyer Sound PSW-6.
However, one of the most important roles played by the user manual is to help in solving problems with Meyer Sound PSW-6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meyer Sound PSW-6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
