Instruction/ maintenance manual of the product Loudspeaker MSL-10A Meyer Sound
Go to page of 8
MSL-10A High Power Loudspeaker System The Meyer Sound MSL-10A is an extremely high-power, high-performance loudspeaker system designed for large-scale music reinforcement and public address applications.
MSL-10A Loudspeaker Fork lift brackets (top & bottom) High frequency horns Low frequency horns Reflex port and enclosure ventilation Front View High frequency driver service access Speaker connect.
Acoustical System 1 Frequency Response 2 Maximum SPL at 100 feet Continuous Peak HF Coverage, -6 dB points Horizontal Vertical MSL-10A Loudspeaker (one 30 ° section) Driver Complement HF DC Protection Enclosure Finish Protective Grill Rigging Dimensions Weight Power Requirement Connectors Notes: 1.
Arraying and Rigging The MSL-10A loudspeaker is designed to function as a modular building block capable of being arrayed in multiples to satisfy a wide range of acoustical power and coverage requirements. Configured as a tightly controlled 30-degree section, the MSL-10A cabinet features a trapezoidal con- struction which forms curved arrays.
Long-Throw Configuration 20 ° Vertical Coverage 60 ° Horizontal Coverage Ring Configuration 360 ° Horizontal Coverage 113" (approx.) 80.25" radius (approx.
MSL-10A Rack System M-10A Control Electronics Unit High Amplifier 50A Power Switch/ Circuit Breaker Low Amplifier 1 Low Amplifier 2 MS 10 Power Amplifiers Notes: 1. Cycle consisting of 50 msec sinewave at 120 V peak and 450 msec sinewave at 24 V peak 2.
Active balanced, 10k ohms, ISO™ Input Active push-pull, 600 ohm drive +20 dBv +26 dBv -90 dBv (“A” weighted) 120 dB 800 Hz RMS, peak and excursion limiters RMS, peak and excursion limiters Peak .
Meyer Sound Laboratories, Inc. 2832 San Pablo Avenue Berkeley, CA 94702 ( 510 ) 486-1166 FAX ( 510 ) 486-8356 Sound engineering for the art and science of sound. © 1990 Meyer Sound 04.110.099.01B Meyer Sound Laboratories has devoted itself to designing, manufacturing, and refining com- ponents that deliver superb sonic reproduction.
An important point after buying a device Meyer Sound Loudspeaker MSL-10A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meyer Sound Loudspeaker MSL-10A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meyer Sound Loudspeaker MSL-10A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meyer Sound Loudspeaker MSL-10A you will learn all the available features of the product, as well as information on its operation. The information that you get Meyer Sound Loudspeaker MSL-10A will certainly help you make a decision on the purchase.
If you already are a holder of Meyer Sound Loudspeaker MSL-10A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meyer Sound Loudspeaker MSL-10A.
However, one of the most important roles played by the user manual is to help in solving problems with Meyer Sound Loudspeaker MSL-10A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meyer Sound Loudspeaker MSL-10A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
