Instruction/ maintenance manual of the product HD-1 Meyer Sound
Go to page of 4
HD-1 High Definition Audio Monitor Operating Instructions The HD-1 High Definition Audio Monitor* is a self-contained, precision loudspeaker for near- field sound reproduction. Aligned to closely approximate a true point source radiator, the HD-1 features exceptionally broad directivity characteristics.
2 1 0 0 2 40 2 2 0 1 2 0 PUSH IEC mains connector and power switch Voltage selector switch Calibration port (factory use only) Input connector Input sensitivity switch Voltage selection and fuse ratin.
3 Shorting any input connector pin to the case may form a ground loop and cause hum. Standard audio cables with XLR-type connectors may be used for balanced signal sources. Unbal- anced sources will require an in- line adapter. Operation In normal operation, the front- panel LED will glow green.
4 Specifications Obtaining Service The HD-1 Monitor is protected by Meyer Sound’s Limited One- Year Warranty. For complete information regarding terms and conditions, refer to the printed warranty statement that is packed with the system.
An important point after buying a device Meyer Sound HD-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meyer Sound HD-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meyer Sound HD-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meyer Sound HD-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Meyer Sound HD-1 will certainly help you make a decision on the purchase.
If you already are a holder of Meyer Sound HD-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meyer Sound HD-1.
However, one of the most important roles played by the user manual is to help in solving problems with Meyer Sound HD-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meyer Sound HD-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center