Instruction/ maintenance manual of the product DS-2 Meyer Sound
Go to page of 4
Features High power Flat frequency response Arrayable Rugged Long-term reliability Applications Main PA arrays Concert reinforcement Theater sound reinforcement Live music clubs systems DS-2 Mid-Bass Loudspeaker Meyer Sound Laboratories, Inc.
DS-2 Specifications Acoustical – DS-2 / D -2 System 1 Frequency response 2 50-160 Hz ± 3 dB Maximum SPL 3 Continuous 136 dB Peak 148 dB Sensitivity 4 112 dB Coverage (-6dB points) Horizontal 120 degrees Vertical 120 degrees DS-2 Loudspeaker Transducers (2) MS-15 15-inch cone driver Impedance Nominal 4 ohms Minimum 3.
D-2 Control Electronics Unit analog OR condition, automatically tracks the power amplifier with the greatest out- put voltage swing to control the system protection limiters.
Architectural and Engineering Specifications DS-2/D-2 The mid-bass loudspeaker system shall be of the folded-horn type with two 15" cone loudspeakers in symmetrical compres- sion chambers.
An important point after buying a device Meyer Sound DS-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meyer Sound DS-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meyer Sound DS-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meyer Sound DS-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Meyer Sound DS-2 will certainly help you make a decision on the purchase.
If you already are a holder of Meyer Sound DS-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meyer Sound DS-2.
However, one of the most important roles played by the user manual is to help in solving problems with Meyer Sound DS-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meyer Sound DS-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
