Instruction/ maintenance manual of the product 34 AF-3 C Metz
Go to page of 19
TV • VIDEO • CAMCORDER • MECABLITZ MECABLITZ 34 AF-3 C Operating instructions.
2 Foreword Dear Customer, We thank you for your confidence in our meca- blitz MB 34 AF-3C. The MB 34 AF-3C flashgun has been especially designed for Canon EOS system cameras.
3 Contents 1. Safety instructions . . . . . . . . . . . . . . . . .23 2. Preparing the mecablitz for use . . . . . . .24 2.1 Power supply . . . . . . . . . . . . . . . . . . . . . .24 2.2 Loading and replacing the batteries . . . . . .24 2.3 Automatic flashgun cut-out circuit .
4 1. Safety instructions • NEVER fire a flash in the immediate vicinity of the eyes! Flash fired directly in front of the eyes of a person or animal can damage the retina and lead to severe visual disorders - even blindness! • Spent batteries should be immediately remo- ved.
5 2. Preparing the mecablitz for use 2.1 Power supply The flashgun can only be operated with 2 CR2- type lithium batteries. This type of battery can be stored for many years with practically no loss of energy, thus making it ideal for occasional ama- teur flash photography.
6 2. Preparing the mecablitz for use When loading the batteries ensure correct polarity. Incorrectly loaded batteries can dest- roy the flashgun! All batteries must be of the same make and have the same charge level.
7 3. Setting the mecablitz into operation 3.1 Preconditions The mecablitz must only be used with TTL flash controlled cameras! The sensor of TTL flash controlled cameras measures the light reaching the film through the camera lens and instantly cuts out the flash when the film has been correctly expo- sed.
8 4. Flashgun instructions to the camera The mecablitz transmits different signals and messages to the camera when it is connected to the camera and is switched on. 4.1 Flash-ready indication The green light on the mecablitz illuminates when the flash capacitor is fully primed, thereby indicating flash readiness.
9 4. Flashgun instructions to the camera 4.4 Information displayed in the camera’s viewer The following table only gives a general survey. Camera-specific deviations ar possible (please refer to the camera’s operating instructions. blinks: Indicates that flashgun should be used or switched on (on some cameras).
10 5. TTL flash control The mecablitz receives its information exclusively from the connected TTL-controlled camera. Exposure measurement in TTL mode (TTL = t hrough- t he- l ens) is completed by the camera’s sensor. This sensor measures the light reaching the film through the camera lens.
11 5.1 E-TTL flash control E-TTL flash control is only possible with cameras featuring this function. E-TTL flash control is auto- matically set on the flash unit. In the E-TTL flash control mode, a pre-flash is fired to establish the reflective characteristics of the subject just before the actual shot is taken.
12 6. Flash synchronisation Different modes of flash synchronisation are pos- sible, depending on the camera model. Please refer to the camera’s operating instructions to find out how the individual modes of synchronisation are set on the camera. 6.
13 7. Flash in the individual camera modes 7.1 Use of flash in the program modes TTL-controlled flash shots can be made in all expo- sure and auto program modes.
14 8. Autofocus measuring flash The integrated AF red-light beam of the mecablitz supports the automatic focusing of autofocus TTL cameras. When the prevailing light is insufficient for automatic focusing, the mecablitz will project a pattern of red vertical stripes onto the subject as soon as the camera’s release is lightly touched.
15 8. Autofocus measuring flash 9. Flash techniques and flash functions • Depending on the camera type, either the AF illuminator of the camera or that of the flashgun will be activated whenever the autofocus mea- suring facility becomes necessary.
16 10. Lighting and attachments Your mecablitz provides full and even illumination of normal 24 x 36 mm negatives when using len- ses of 35 mm focal length and longer. A wide-angle diffuser is supplied with the flash- gun to increase the coverage if you wish to use a 28 mm wide-angle lens.
17 11. Care and maintenance - T roubleshooting Remove grime and dust with a soft, dry cloth. Do not use cleaning agents as these could damage the plastic parts. Forming the flash capacitor The flash capacitor incorporated in the flashgun undergoes a physical change when the flashgun is not switched on for prolonged periods.
18 1,4 W N T W N T W N T W N T W N T W N T W N T W N T 8 11 16 22 32 45 10 14 20 28 40 56 12 17 24 34 48 67 5,5 8 11 16 22 32 7 10 14 20 28 40 8,5 12 17 24 34 48 4 5,5 8 11 16 22 5 7 10 14 20 28 6 8,5.
19 400 [m] W – 20% T + 20% 5 7 10 14 20 28 200 3,5 5 7 10 14 20 100 2,5 3,5 5 7 10 14 50 1,8 2,5 3,5 5 7 10 I S O 11 8 5,6 4 2,8 2 This table indicates a section of the most im- portant maximum lighting distances in different ISO/aperture combinations.
An important point after buying a device Metz 34 AF-3 C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metz 34 AF-3 C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metz 34 AF-3 C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metz 34 AF-3 C you will learn all the available features of the product, as well as information on its operation. The information that you get Metz 34 AF-3 C will certainly help you make a decision on the purchase.
If you already are a holder of Metz 34 AF-3 C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metz 34 AF-3 C.
However, one of the most important roles played by the user manual is to help in solving problems with Metz 34 AF-3 C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metz 34 AF-3 C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
