Instruction/ maintenance manual of the product CK-612MI Metra Electronics
Go to page of 8
.
2 Disconnect the negative battery terminal to prevent an accidental short circuit. Using a panel removal tool, pry out on the radio trim bezel and remove.
4 Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the radio trim bezel (the factory pocket will be attached). Remove (4) screws securing the factory head unit and disconnect the wiring. 1 2 Cut and remove all mounting tabs on the Radio Housing EXCEPT tabs "B".
Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) Phillips screws from each side of the gear shifter console. Remove (2) Phillips screws from the top of the console (under the ashtray). Lift the console out and remove (2) Phillips screws exposed at the base of the dash trim bezel.
8 Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the gear shifter trim panel and remove. Remove (2) Phillips screws exposed at the base of the dash trim bezel. Unclip the dash trim bezel. Remove (4) Phillips screws securing the factory head unit and disconnect the wiring.
10 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) screws above the climate controls. Unclip the bottom of the dash trim bezel and remove the bezel. Remove (4) screws securing the factory head unit and disconnect the wiring.
12 ALL VEHICLES 4 IF THE LOWER PORTION OF THE RADIO HOUSING HAS BEEN REMOVED FOR POCKET RETENTION: Mount the Brackets to the Radio Housing with (2) clips and (2) #6 x ¼" Phillips Flat-head Screws supplied.
14 TALON 1995-98, ECLIPSE 1995-98, COL T, SUMMIT , MIRAGE, STEALTH, 3000GT , DIAMANTE, GALANT, MONTERO: No cutting of the dash or dash trim bezel is required.
An important point after buying a device Metra Electronics CK-612MI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics CK-612MI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics CK-612MI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics CK-612MI you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics CK-612MI will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics CK-612MI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics CK-612MI.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics CK-612MI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics CK-612MI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
