Instruction/ maintenance manual of the product 99-7953 Metra Electronics
Go to page of 8
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION APPLICA TIONS 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7953 Small Flat Blade Scre.
T able of Contents Dash Disassembly – Suzuki Grand Vitara 2006-up 3 Kit Assembly – DIN head unit provision 4 – ISO DIN head unit provision 5 K NO WLEDGE IS P OW ER E nhance your installation and fabrication skills by enrolling in the most re cognized and re spected mobile electronics school in our industry .
1. Unclip and remove the (2) outside trim panels. (Figure A) 2. Remove (6) Phillips screws securing the radio and climate controls to the sub dash. (Figure B) 3. Remove the (2) Phillips screws securing the factory radio bracket to the radio/ climate control assembly .
4 Kit Assembly 99-7953 DIN head unit provision 1. Locate the factor y wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 2. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs down.
5 Kit Assembly 99-7953 ISO DIN head unit provision Right Side Clip (Figure A) (Figure B) 1. Locate the factor y wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 2. Mount the ISO brackets to the head unit with the screws supplied with the unit.
Notes.
Notes.
METRA. THE WORLD’S BEST KITS.™ © COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORA TION 1-800-221-0932 metraonline.com INST ALLA TION INSTRUCTIONS FOR PART 99-7953 REV .
An important point after buying a device Metra Electronics 99-7953 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7953 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7953 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7953 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7953 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7953, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7953.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7953. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7953 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
