Instruction/ maintenance manual of the product 99-7610B Metra Electronics
Go to page of 12
INST ALLA TION INSTRUCTIONS FOR PART 99-7610 99-7610B 99-7610HG 2007-up Nissan V ersa 2011 Nissan Juke KIT FEA TURES • DIN head unit provisions with pocket • ISO DIN head unit provision with pocke.
Dash Disassembly - Nissan Versa 2007-up..............................................................................1 - Nissan Juke 2011.................................................................................... 2 Kit Assembly - DIN Mount Radio Provision with Pocket .
VOL CD LOAD SCRL AUDIO SCAN C AT CH AUX 6CD CHANGER RPT RDM DISP CLOCK RADIO PRESET A-B-C SEEK TRACK F ILE TUNE FF-REW FOLDER PWR PUSH 1 2 3 4 5 6 1 1. Unclip and remove the panel above the radio. (Figure A, B) 2. Remove (2) Phillips screws securing the radio trim panel then unclip and remove the entire panel surrounding the radio and a/c controls.
2 1. Unclip and remove the climate control panel. (Figure A) 2. Remove (2) Phillips screws securing the radio trim panel. (Figure B) 3. Remove (4) Phillips screws securing radio, unplug and remove radio.
3 Note: Y ou will need to remove the after- market radio’s trim ring if equipped. 1. Cut and remove the a ppropriate tabs not necessar y for your application. (Figure A) 2. Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down.
FRONT F ACE- RIGHT SIDE BR ACK ET Note: The following modification will need to be made to both ISO brackets when using the ISO mount radio provision. Cut or trim the area shown from the ISO bracket. (Figure A) 1. Cut and remove the a ppropriate tabs not necessar y for your application.
1. Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure C) 2. Slide the head unit into the radio opening until the side clips enga ge. (Figure D) 3. Locate the factor y wiring harness and antenna plug in the dash. Metra recommends using the proper ma ting adapters from Metra and/or AXXESS.
1. Mount the factor y brackets (removed from factor y radio during disassembly) to the sides of the double DIN radio using screws supplied with the double DIN radio. (Figure A) 2. Locate the factor y wiring harness and antenna plug in the dash. Metra recommends using the proper ma ting adapters from Metra and/or AXXESS.
99-7610 NOTES.
NOTES 99-7610.
NOTES 99-7610.
REV . 7/26/11 INST ALLA TION INSTRUCTIONS FOR PART 99-7610 1-800-221-0932 © COPYRIGHT 2011 METRA ELECTRONICS CORPORA TION metraonline.com METRA. THE WORLD’S BEST KITS.
An important point after buying a device Metra Electronics 99-7610B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7610B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7610B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7610B you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7610B will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7610B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7610B.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7610B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7610B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
