Instruction/ maintenance manual of the product 99-7581 Metra Electronics
Go to page of 8
INST ALLA TION INSTRUCTIONS FOR P ART 99-7581 T20 T orx Driver • Small Flat Blade Screwdriver • Phillips Screwdriver 1-800-221-0932 www .metr aonline.
99-7581 D ASH DISASSEMBL Y Nissan Pathfinder 2005-2007/2008-10 (S models) . . . . . . . . . 1 Nissan Frontier 2005-2008 / Xterra 2005-2008/2009-10 (x models) Frontier 2009-10 (XE & SE w/ no options) . . . . . . . . . . . . . . . 2 KIT ASSEMBL Y DIN Head Unit Provisions .
99-7581 1 NOTE: Do not c ycle the key while the dash is removed or the air bag light will come on. Disconnect the negative batter y terminal to prevent an accidental short cir cuit. 1 P A THFINDER 2005-2007/08-10 (s models) Unclip and remove trim panel from around cup holders in the center console .
99-7581 2 DASH DISASSEMBL Y FRONTIER/XTERRA 2005-2008/ FRONTIER 2009-2010 (XE & SE w/ no options) Disconnect the negative batter y ter minal to prevent an accidental short circuit. 1 Unclip and r emo ve panel at top of radio and remove (1) Phillips scr ew underneath.
99-7581 3 KIT ASSEMBL Y Slide the DIN cage into the radio housing and secure b y bending the metal locking tabs down. (Figure A) 1 A Slide the after mark et head unit into the cage and secure .
99-7581 4 KIT ASSEMBL Y Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure A) 1 A Slide the head unit into the radio opening until the side clips engage . (Figure B) 2 ISO DIN HEAD UNIT PROVISIONS B Snap the trim plate into the radio housing .
99-7581 5 KIT ASSEMBL Y Mount the factor y brack ets onto the aftermarket radio or stacked ISO units using the hardw are supplied with the new radio . 1 A Remo ve the (2) T -20 T orx screws from the factor y a/c vents in the factor y radio trim panel that will secure the DDIN trim plate .
6 FINAL ASSEMBL Y 1 Locate the factor y wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.
An important point after buying a device Metra Electronics 99-7581 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-7581 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-7581 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-7581 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-7581 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-7581, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-7581.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-7581. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-7581 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
