Instruction/ maintenance manual of the product 99-5822B Metra Electronics
Go to page of 8
INST ALLA TION INSTRUCTIONS FOR PART 99-5822B KIT FEA TURES • DIN Radio Pro vision With Pocket • ISO Mount Radio Provision With Pocket • Painted or Wood Grain • A) Radio Housing • B ) R adio.
Dash Disassembly - F O R D F - 1 5 0 2 0 0 9 - 1 0 .............................. . 1,2 Kit Preparation - F O R D F - 1 5 0 2 0 0 9 - 1 0 ................................ .3 Kit Assembly - DIN Radio Provision With Pocket ............................ .
99-5822B DASH DISASSEMBL Y FORD F-150 2009-10 A B C D 1 1 Remo ve the rubber pad at the top of the radio trim panel then remove the (2) 9/32” screws exposed. ( Figure B) Disconnect the negative battery terminal to prevent an accidental short circuit.
99-5822B DASH DISASSEMBL Y FORD F-150 2009-10 G F ACTO RY RADIO TRIM PA N EL-REAR VIEW 2 Remove (4) T orx screws securing the factory climate control to the radio trim panel. ( Figure G) 8 Unclip and remove the cigarette lighter socket from the radio trim panel.
99-5822B KIT ASSEMBL Y FORD F-150 2009-10 A B C KIT REPLACEMENT RADIO TRIM P ANEL-REAR VIEW D KIT REPLACEMENT RADIO TRIM P ANEL-REAR VIEW 3 Secure the climate control into the radio housing using the factory har dware in the same location as the factor y r adio trim panel.
99-5822B KIT ASSEMBL Y 4 DIN RADIO PROVISION WITH POCKET Cut and remove the top (2) mounting holes off of the radio housing. Note: The notch in the housing should be on top. (Figure A) 1 Slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward.
99-5822B KIT ASSEMBL Y 5 ISO MOUNT RADIO PROVISION WITH POCKET Cut and remove the top (2) mounting holes off of the radio housing. Note: The notch in the housing should be on top. (Figure A) 1 Slide the included brackets onto the sides of the radio housings pocket from the back of the housing forward.
99-5822B FINAL ASSEMBL Y FINAL ASSEMBL Y FINAL ASSEMBL Y (A) Strip wire ends back 1/2" B) T wist ends together C) Solder D) T ape A B C D Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter and making the connections as shown.
An important point after buying a device Metra Electronics 99-5822B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-5822B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-5822B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-5822B you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-5822B will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-5822B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-5822B.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-5822B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-5822B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
