Instruction/ maintenance manual of the product 99-3304 Metra Electronics
Go to page of 8
INST ALLA TION INSTRUCTIONS FOR P ART 99-3304 Soc k et Wr ench • Flat Blade Scr ewdriver • Phillips Screwdriver 1-800-221-0932 www .metr aonline.com KIT FEA TURES © COPYRIGHT 2004-2009 METRA ELEC.
99-3304 Dash Disassembly ........................................................................ 1-3 Kit Assembly ................................................................................. 4-5 Final Assembly ...................................
99-3304 1 Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 Unclip and remove trim panel around radio and a/c control. (Figure A) 2 CHEVY UPLANDER, PONTIAC MONT ANA SV6, BUICK TERRAZA 2005-2008/ SA TURN RELA Y 2005-2007 Remo ve (8) 9/32” scr ews to e xtr act radio and a/c control from sub dash.
99-3304 2 DASH DISASSEMBL Y CHEVROLET CORVETTE 2005-2010 Disconnect the negative batter y terminal to prevent an accidental short circuit. 1 A Unclip and remove ride control switch/blank plate at front edge of center console lid. (Figure A) 2 Remo ve (2) 9/32” screws from under plate removed in step 2.
DASH DISASSEMBL Y HUMMER H3 2006-2009 99-3304 3 A 12:04 95.9 B Unclip and remove trim panel around radio and a/c controls. (Figure A) 2 Remo ve (4) 9/32” screws securing radio . (Figure B) 3 Unplug and remove radio . 4 Disconnect the negative batter y terminal to prevent an accidental short circuit.
4 Slide the DIN cage into the Radio Housing and secure b y bending the metal locking tabs down. (Figure A) 1 A Slide the after mark et head unit into the cage and secure .
5 Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure A) 1 A Slide the head unit into the radio opening until the side clips engage .
FINAL ASSEMBL Y 1 Locate the factor y wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.
An important point after buying a device Metra Electronics 99-3304 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-3304 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-3304 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-3304 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-3304 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-3304, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-3304.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-3304. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-3304 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
