Instruction/ maintenance manual of the product 99-3301 Metra Electronics
Go to page of 4
TOOLS REQUIRED Socket wrench Phillips screwdriver KIT COMPONENTS Mounting Brackets KIT FEATURES ISO-DIN unit provisions CD pocket holds (2) jewel cases Radio Housing ALL VEHICLES 4 5 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adaptor and making connections as shown.
6 Disconnect the negative battery terminal to prevent an accidental short circuit. Open drivers door and unsnap and remove dash end cap. Remove (2) phillips screws from underneath steering column cover. Unsnap and remove steering column cover. Unsnap and remove instrument panel.
2 Disconnect the negative battery terminal to prevent an accidental short circuit. Open drivers door and remove fuse panel on end of dash. Open passenger door and remove panel on end of dash. Remove (1) Phillips screw from each side exposed. Remove (3) screws from top of glove box liner.
4 Disconnect the negative battery terminal to prevent an accidental short circuit. Pull out cup holder inserts. Remove (1) phillips screw exposed inside bottom cup holder. Unsnap and remove shifter trim with cup holders. Remove (2) #15 torx at bottom of radio / climate bezel.
An important point after buying a device Metra Electronics 99-3301 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-3301 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-3301 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-3301 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-3301 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-3301, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-3301.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-3301. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-3301 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
