Instruction/ maintenance manual of the product 99-1008 Metra Electronics
Go to page of 8
INST ALLA TION INSTRUCTIONS FOR P ART 99-1008 Small Flat Blade Screwdriver I Phillips Screwdriver 1-800-221-0932 www .metr aonline.com KIT FEA TURES © COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORA TION APPLICA TIONS • 2003-2006 Kia Sorento LX • 2004.
99-1008 • Dash Disassembly - 2003-2006 Kia Sorento LX ...................................................... 1 - 2004.5-2006 Kia Spectra ........................................................ 2 • Kit Assembly - DIN Head Unit Provision ..........
99-1008 1 D A SH DIS A SSEMBL Y Disconnect the negative batter y terminal to prevent an accidental short circuit. Open ash tray and unsnap and remove outside trim panels. (Figure A) T ip: Start at the bottom of the trim panels. 1 2 Remove (8) Phillips screw from the radio trim panel.
2 99-1008 D A SH DIS A SSEMBL Y 2004.5- 2006 KIA SPECTR A Using a flat blade screwdriver as a pr y tool, unsnap and remove the center dash panel including the cli- mate controls and vents from around the r adio . (Figure A) 2 A Remove (4) phillips screws to remove radio .
3 99-1008 KIT A SSEMBL Y ISO DIN HEAD UNIT PRO VISION 1 Mount the ISO Brackets to the head unit with the screws supplied with the unit. 2 Slide the head unit into the radio opening until the side clips engage . (Figure A) 3 Snap the T rim plate into the Radio Housing.
4 99-1008 FINAL A SSEMBL Y A Locate the factor y wiring harness in the dash. Metra recommends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit) Re-connect the negative batter y terminal and test the unit for proper operation.
5 99-1008 NOTES.
1-800-221-0932 www .metr aonline.com © COPYRIGHT 2004-2007 METRA ELECTRONICS CORPORA TION Rev . 06-13-07 INST991008.
An important point after buying a device Metra Electronics 99-1008 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Metra Electronics 99-1008 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Metra Electronics 99-1008 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Metra Electronics 99-1008 you will learn all the available features of the product, as well as information on its operation. The information that you get Metra Electronics 99-1008 will certainly help you make a decision on the purchase.
If you already are a holder of Metra Electronics 99-1008, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Metra Electronics 99-1008.
However, one of the most important roles played by the user manual is to help in solving problems with Metra Electronics 99-1008. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Metra Electronics 99-1008 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center