Instruction/ maintenance manual of the product 2010 ML63 AMG Mercedes-Benz
Go to page of 368
M-Class Operator’s Manual 164_AKB; 7; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:07:36+02:00 - Seite 1.
Symbols Trademarks ® : R AdBlue ® is a registered trademark of the German Association of the Automotive Industry (VDA). R BabySmart TM is a trademark of Siemens Automotive Corp. R Bluetooth ® is a registered trademark of Bluetooth SIG Inc. R ESP ® and PRE-SAFE ® are registered trademarks of Daimler.
Our company and staff congratulate you on the purchase of your new Mercedes-Benz. Your selection of our product is a demonstration of your trust in our company name. Furthermore, it exemplifies your desire to own an automobile that will be as easy as possible to operate and will provide years of service.
164_AKB; 7; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:07:36+02:00 - Seite 2.
Index ....................................................... 4 Introduction ......................................... 20 At a glance ........................................... 25 Safety and security ............................. 35 Controls in detail .
1, 2, 3 ... 115V AC Socket ................................. 198 3-zone automatic climate control see Climate control system 4-ETS see ETS/4-ETS 4MATIC see All-wheel drive (4MATIC) A ABS (Antilock Brake System) ............. 62 Indicator lamp ........
Armrest, front Storage compartment .................... 193 Ashtrays ............................................. 196 Aspect ratio (tires) ............................ 240 Audio/DVD menu .............................. 126 Auto-dimming rear view mirrors .
Fuse box ........................................ 344 Hooks ............................................ 189 Tie-down rings ............................... 188 Cargo compartment cover blind ...... 190 Cargo net ........................................
Coolant Anticorrosion/antifreeze ............... 363 Capacities ...................................... 358 Checking level ............................... 216 Messages in the multifunction display ........................................... 288 Corner-illuminating front fog lamps .
Driving Abroad ........................................... 257 Hydroplaning ................................. 247 Instructions ........................... 103, 244 In winter ........................................ 243 Off-road .......................
Oil dipstick ..................................... 215 Recommended engine oils and oil filter ............................................... 359 ESP ® (Electronic Stability Program) .............................................. 63 ETS/4-ETS .......
G Garage door opener .................... 32, 204 Gasoline see Fuel GAWR (Gross Axle Weight Rating) ... 240 Gear range ......................................... 113 Indicator ........................................ 114 Limiting ......................
Inflation pressure see Tires, Inflation pressure Infrared reflecting windshield ......... 208 Inside door handle .............................. 74 Instrument cluster ............................ 117 Illumination .................................... 118 Lamps .
Front passenger front air bag off (USA only) ................................ 42, 305 Fuel tank reserve ..................... 29, 303 High-beam headlamps ............... 29, 96 Instrument cluster ................... 28, 297 Low-beam headlamps ........
Air filter .......................................... 292 Air suspension program ................. 285 Alternator .............................. 280, 290 Automatic transmission .................................. 280 Battery ...........................
OCS (Occupant Classification System) ................................................ 42 Self-test ........................................... 45 Odometer ........................................... 121 Off-road driving ...............................
Program mode selector switch Automatic shift program ................ 114 Manual shift program ..................... 116 Proximity key see Key, SmartKey PSI (air pressure unit) ....................... 241 R RACETIMER ..................................
Securing cargo Cargo tie-down rings ...................... 188 Selective setting see Key, SmartKey Selector lever see Ge ar sele ctor le ver Self-test BabySmart™ .................................... 47 OCS (Occupant Classification System) ..........
Capacities fuels, coolants, lubricants etc. ................................ 356 Coolant .......................................... 362 Engine oil additives ........................ 359 Engine oils ..................................... 359 Fuel requirements .
Messages in the multifunction display ................................... 281, 296 MOExtended .................................. 352 Ply composition and material used ............................................... 241 Problems under-/overinflation ..
Modifications and alterations, Operating safety .............................. 23 Towing ........................................... 338 Unlocking/locking manually .......... 306 Vehicle configuration menu ............. 137 Vehicle dimensions see Vehicle specification Vehicle Identification Number (VIN) .
Product Information Please observe the following in your own best interest: We recommend using Genuine Mercedes- Benz Parts as well as conversion parts and accessories explicitly approved by us for your vehicle model. We have tested these parts to determine their reliability, safety and special suitability for Mercedes-Benz vehicles.
Rhode Island, and Vermont Emission Control System Warranty 1 R State Warranty Enforcement Laws (Lemon Laws) Important notice for California retail buyers and lessees of Mercedes-Benz automobiles Under.
determined by our authorized technician and tow service provider. For additional information refer to the Mercedes-Benz Roadside Assistance Program brochure (in the USA) or the Roadside Assistance section of the Service and Warranty Information Booklet (in Canada) in your vehicle literature portfolio.
Operating safety G Warning! Work improperly carried out on electronic components and associated software could cause them to cease functioning. Because the vehicle’s electronic components are interconnected, any modifications made may produce an undesired effect on other systems.
In Canada: Customer Relations Department Mercedes-Benz Canada, Inc. 98 Vanderhoof Avenue Toronto, Ontario M4G 4C9 Reporting safety defects For the USA only: The following text is published as required of manufacturers under Title 49, Code of U.
Exterior view ....................................... 26 Cockpit ................................................. 27 Instrument cluster .............................. 28 Multifunction steering wheel ............. 30 Center console ...................
Exterior view i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
Cockpit Function Page : Cruise control lever: Cruise control 141 Distronic 144 ; Instrument cluster 28, 117 = Multifunction steering wheel 30, 119 ? Horn A Steering wheel gearshift control 115 B Gear .
Instrument cluster Function Page : # Left turn signal indicator lamp ; To dim instrument cluster illumination 118 = Reset button for: Trip odometer 118 Settings 129 ? To brighten instrument cluster il.
Function Page D Multifunction display with: Trip odometer 118 Main odometer 121 E Tachometer with: 7 Seat belt telltale 51, 300 % Preglow indicator lamp, diesel engine only 104 or é Recuperative Brak.
Multifunction steering wheel Function Page : Multifunction display 121 ; Press button ~ : to end a call 139 to reject an incoming call 139 Press button 6 : to answer a call 139 to dial 5 139 to redial.
Center console Upper part Function Page : COMAND system, see separate operating instructions ; Climate control system 165 Rear window defroster 183 = Seat heating, front passenger side 86 ? Seat venti.
Lower part Function Page : Ashtray with storage compartment 196 Cigarette lighter 196 ; Cup holder 194 = Front armrest storage compartment 192 ? Removable card/ticket holder 194 Overhead control panel.
Function Page H Hands-free microphone for Tele Aid (emergency call system), telephone and Voice Control System, see separate operating instructions I Front left interior lamp 97 Door control panel Fun.
34 164_AKB; 7; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:07:36+02:00 - Seite 34.
Vehicle equipment .............................. 36 Occupant safety .................................. 36 Panic alarm .......................................... 61 Driving safety systems ....................... 61 Anti-theft systems ..................
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
G Warning! The SRS self-check has detected a malfunction when the SRS indicator lamp + : R does not come on at all R does not go out after 4 seconds after the engine was started R comes on while driving For your safety, we strongly recommend that you contact an authorized Mercedes-Benz Center immediately to have the system checked.
you have any difficulties, please contact an authorized Mercedes-Benz Center. R Do not lean your head or chest close to the steering wheel or dashboard. R Keep hands on the outside of the steering wheel rim. Placing hands and arms inside the rim can increase the risk and potential severity of hand/arm injury when the driver front air bag inflates.
bags repaired. This will help to make sure the air bags will continue to provide supplemental crash protection for occupants. Safety guidelines for the seat belt, Emergency Tensioning Device (ETD) and air bag G Warning! R Damaged seat belts or seat belts that have been subjected to stress in an accident must be replaced.
Front air bags G Observe Safety notes, see page 37. Driver’s front air bag : and front passenger front air bag ; are designed to provide increased protection for the driver and front passenger against the risk of injuries to the head and thorax.
doors must therefore only be performed by qualified technicians. Contact an authorized Mercedes-Benz Center. Front side impact air bags : and rear side impact air bags ; are designed to provide increased protection for the thorax but not the head, neck and arms.
R regardless of whether the front passenger seat is occupied R in certain vehicle rollovers, if the system determines that air bag deployment can offer additional protection to that provided by the seat belt Window curtain air bags : are not deployed in impacts which do not exceed the system’s deployment threshold.
When the OCS senses that the front passenger seat occupant is classified as being up to or less than the weight of a typical 12-month-old child in a standard child restraint, the 42 indicator lamp will illuminate when the engine is started and remain illuminated, indicating that the front passenger front air bag is deactivated.
Children can be killed or seriously injured by an inflating air bag. Note the following important information when circumstances require you to place a child in the front passenger seat: R Your vehicl.
42 indicator lamp : will be illuminated, except with the SmartKey removed from the starter switch or with the starter switch in position 0 . G Warning! If the red SRS indicator lamp + in the instrument cluster and the 42 indicator lamp are lit at the same time, there is a malfunction in the OCS.
If necessary, adjust the tilt of the passenger seat backrest. An incorrectly mounted child seat could cause injuries to the child in case of an accident, instead of increasing protection for the child. Follow the manufacturer’s instructions for installation of child seats.
of the child, and secure child restraint with the vehicle’s seat belt according to the child seat manufacturer’s instructions. G Warning! When using a BabySmart™ compatible child seat on the front passenger seat, the front passenger front air bag will not deploy only if the 42 indicator lamp remains illuminated.
the effectiveness off the BabySmart™ air bag deactivation system. The bottom of the child seat must make full contact with the front passenger seat cushion. An incorrectly mounted child seat could cause injuries to the child in case of an accident, instead of protecting the child.
way than as described in this section, as that could result in serious injuries in case of an accident. R Each occupant should wear their seat belt at all times, because seat belts help reduce the likelihood of and potential severity of injuries in accidents, including rollovers.
Fastening the seat belts G Warning! According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating position. Thus, we strongly recommend that children be placed in the rear seats whenever possible.
Seat belt outlet height adjustment X Raising: Slide the seat belt outlet height adjuster upward. The seat belt outlet height adjuster engages in different positions. X Lowering: Press and hold release button : . X Slide the seat belt outlet height adjuster downward.
If you and/or your passenger release the seat belt during driving, the seat belt telltale 7 starts flashing and the warning chime sounds as described before.
The PRE-SAFE ® system takes preventive measures to better protect the occupants from the possibility of personal injuries in the following hazardous situations: R emergency braking maneuvers with the Brake Assist System (BAS) ( Y page 63) activated R critical dynamic driving situations, e.
must be reset. Otherwise, the NECK-PRO active front head restraints cannot offer any additional protection in the event of another rear-end collision. For information on resetting the activated NECK-PRO active front head restraints, see “Resetting activated head restraints” ( Y page 309).
Make sure: R The seat belt is always fitted snugly. R Adjust the seat belt so that the shoulder section is located as close as possible to the middle of the shoulder. R Place the lap portion of the seat belt as low as possible on your hips. Seat and head restraint G Observe Safety notes, see page 81.
Unsecured or improperly positioned cargo increases a child’s risk of injury in the event of R strong braking maneuvers R sudden changes of direction R an accident Infant and child restraint systems G Observe Safety notes, see page 55. We recommend all infants and children be properly restrained at all times while the vehicle is in motion.
infant restraint, toddler restraint, or booster seat recommended for the size and weight of the child. The infant or child restraint must be properly secured with the vehicle’s seat belt, the seat belt and top tether strap, or lower anchors and top tether strap, fully in accordance with the child seat manufacturer’s instructions.
accident, they could be crushed between the occupant and seat belt. A child’s risk of serious or fatal injuries is significantly increased if the child restraints are not properly secured in the vehicle and/ or the child is not properly secured in the child restraint.
X Guide top tether strap ? between the head restraint and top of the seat backrest. X Securely fasten hook = , which is part of top tether strap ? , to anchorage ring ; .
X Install a LATCH-type child seat according to the manufacturer’s instructions. A rigid connection between the child seat and the body of the vehicle is established. X Make sure that the seat belt for the rear center seat can operate freely with a child seat installed.
The rear door windows can no longer be operated using the respective switch located in the rear doors. You can still operate the rear door windows using the switches located on the door control panel of the driver’s door. X Deactivating: Press override switch : again.
achieved with winter tires, or snow chains as required. Safety notes G Warning! The following factors increase the risk of accidents: R Excessive speed, especially in turns R Wet and slippery road sur.
G Warning! If the ABS malfunctions, other driving safety systems such as the BAS or the ESP ® are also switched off. Observe indicator and warning lamps that may come on as well as messages in the multifunction display that may appear.
G Warning! Never switch off the ESP ® when you see the ESP ® warning lamp d flashing in the instrument cluster. In this case proceed as follows: R When driving off, apply as little throttle as possible. R While driving, ease up on the accelerator pedal.
circumstances described below. Disabling the system will reduce vehicle stability in driving maneuvers. Do not switch off the ESP ® when a spare wheel is mounted.
over-/understeering, thus improving vehicle traction. ESP ® trailer stabilization If the trailer you are towing should begin to sway, the rig can only be stabilized by immediately applying the brakes hard. Steering during this maneuver will not help to stabilize the rig.
i If the alarm stays on for more than 30 seconds, the Tele Aid system initiates a call to the Response Center automatically. The Tele Aid system will initiate the call provided that R you have subscri.
68 164_AKB; 7; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:07:36+02:00 - Seite 68.
Vehicle equipment .............................. 70 Locking and unlocking ....................... 70 Starter switch positions ..................... 79 Seats .................................................... 81 Multifunction steering wheel .........
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
i Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. this device must accept any interference received, including interference that may cause undesired operation of the device.
Important notes on using KEYLESS-GO R You can also use the SmartKey with KEYLESS-GO like a normal SmartKey ( Y page 70). R You can combine KEYLESS-GO functions with normal SmartKey functions (e.g. unlocking with KEYLESS-GO and locking with button & ).
Unless you open a door or the tailgate within approximately 40 seconds after unlocking the vehicle: R The vehicle will be locked again. R The antitheft alarm system will be rearmed. X Global locking: Press lock button : on an outside door handle. Selective setting If you frequently travel alone, you may wish to reprogram the SmartKey.
information on replacing the SmartKey, see “Replacing the SmartKey” ( Y page 74). Replacing the SmartKey Only you, or someone authorized by you can order a replacement key from any Mercedes- Benz Center.
Locking and unlocking from the inside G Observe Safety notes, see page 55. You can lock or unlock the vehicle from the inside using the central locking switches. This can be useful, for example, if you want to lock the vehicle before starting to drive.
X Lower tailgate by pulling firmly on handles : . X Close tailgate with hands placed flat on it. Once the tailgate touches the latch, the tailgate will pull itself shut automatically. Power tailgate G Warning! Make sure the tailgate is closed when the engine is running and while driving.
R Pull outside handle on the tailgate. R When no SmartKey is inserted in the starter switch (vehicles with KEYLESS-GO: Make sure the vehicle’s on-board electronics have status 0 ): Press button F on the SmartKey. Do not leave the SmartKey in the vehicle.
R The vehicle locks. R The turn signals flash three times to confirm locking. R The locking knobs in the doors move down. R The anti-theft alarm system is armed. If the tailgate comes into contact with an object while closing, the closing procedure is stopped and the tailgate reopens.
Limiting opening height of tailgate You can limit the opening height of the tailgate in the upper opening range. This can be useful, for example, when the space above the tailgate is not sufficient. Activating X Open the tailgate: Pull on handle ( Y page 75) or press and hold button F on the SmartKey until the tailgate opens.
X Get a jump start. i If the SmartKey does not belong to the vehicle, the SmartKey can be turned in the starter switch. However, the ignition does not switch on and the engine does not start.
i If you now press the KEYLESS-GO start/ stop button R once more, the ignition (position 2 ) is switched on R twice more the power supply is again switched off Ignition (or position 2) X Press the KEYLESS-GO start/stop button twice. This supplies power for all electrical consumers.
vehicle could result in an accident and/or serious personal injury. G Warning! According to accident statistics, children are safer when properly restrained in the rear seating positions than in the front seating position. Thus, we strongly recommend that children be placed in the rear seats whenever possible.
X Seat fore and aft adjustment: Press the switch forward or backward in direction of arrow A . X Seat backrest tilt: Press the switch forward or backward in direction of arrow ? .
Lumbar support You can adjust the contour of the driver’s seat lumbar support to help enhance support to your spine. X Curvature position: Use button : to move the curvature up and button = to move it down. X Degree of curvature: Use button ; to lessen the curvature and button ? to increase it.
X While seated, reach behind you with both hands and find lower edge of the head restraint. X Adjust the head restraint to the desired position by pushing or pulling on the lower edge of the head restraint cushion. Rear seat head restraints, removing and installing X Removing: Pull head restraint : to its uppermost position.
X Switch on the ignition. X Switching on: Press respective seat ventilation switch : . Three blue indicator lamps ; in seat ventilation switch : come on. X Press seat ventilation switch : repeatedly until the desired ventilation level is set. X Switching off: Press seat ventilation switch : repeatedly until all indicator lamps ; go out.
Make sure R you can reach the steering wheel with your arms slightly bent at the elbows R you can move your legs freely R all displays (including malfunction and indicator lamps) on the instrument cluster are clearly visible Steering wheel adjustment, manual X Unlocking: Pull release handle : out to its stop limit.
i The last set steering wheel position is stored when the ignition is switched off or the position is stored in memory ( Y page 92). With the easy-entry/exit feature activated, the steering wheel tilts upwards when you remove the SmartKey from the starter switch.
Mirrors Notes Adjust the interior and exterior rear view mirrors before driving so that you have a good view of the road and traffic conditions. Interior rear view mirror X Adjust the interior rear view mirror manually.
i At low ambient temperatures, the exterior rear view mirrors will be heated automatically. Auto-dimming rear view mirrors The exterior rear view mirror on the driver’s side and the interior rear vi.
The passenger-side exterior rear view mirror returns to its previously stored driving position R 10 seconds after you have put the gear selector lever out of reverse gear R R immediately once your veh.
Memory function Notes With the memory function you can store up to three different configurations per front seat. Each memory position button on the driver’s side can store all of the following settings: R Seat position R Steering wheel position R Exterior rear view mirrors’ position G Warning! Do not activate the memory function while driving.
Exterior lamp switch 1 W Standing lamps, left 2 X Standing lamps, right 3 $ Off Daytime running lamp mode 4 Ã Automatic headlamp mode Daytime running lamp mode 5 T Parking lamps (also tail lamps, lic.
ambient lighting conditions require you to do so. In low ambient lighting conditions, only switch from position à to L with the vehicle at a standstill in a safe location. Switching from à to L will briefly switch off the headlamps. Doing so while driving in low ambient lighting conditions may result in an accident.
USA only You can only switch on the high-beam headlamps in low ambient lighting conditions. The high-beam flasher is available at all times. X For nighttime driving turn the exterior lamp switch to position L or à to permit activation of the high-beam headlamps.
release. The corresponding turn signal lamps will flash three times. High beam X Turn the exterior lamp switch to position L ( Y page 93). X Switching on: Push the combination switch in direction of arrow : . The high-beam headlamp indicator lamp K in the instrument cluster comes on.
R with the front fog lamps switched off R when the engine is running Switching on X Turn the exterior lamp switch to position L or à . or X Activate the daytime running lamp mode ( Y page 94). X Switch on the left or right turn signal, depending on whether you are turning left or right.
R unlock the vehicle R remove the SmartKey from the starter switch ( Interior Lighting Delayed Shut-off must be switched on ( Y page 135)) R open a door R open the tailgate The interior lighting goes out after a short time.
Switching on/off Combination switch 1 $ Windshield wipers off 2 Ä Slow intermittent wiping 8 3 Å Fast intermittent wiping 9 4 ° Slow continuous wiping 5 ¯ Fast continuous wiping B í Single wipe/ î Wiping with washer fluid X Switch on the ignition.
For information on filling up the washer reservoir, see “Washer system and headlamp cleaning system” ( Y page 217). For information on cleaning the headlamps with washer fluid, see “Headlamp cleaning system” ( Y page 96). Rear window wiper/washer X Observe notes on page ( Y page 98).
are located on the front passenger door and on the rear doors. i Operating the rear door windows from the rear is not possible when you activate the override switch ( Y page 60).
Closing when a door window is blocked G Warning! Make sure that nobody can become trapped and be seriously or even fatally injured when closing a door window with greater force or without automatic reversal function. If the upward movement of a door window is blocked during the closing procedure, the door window will stop and open slightly.
of anyone being harmed by the closing procedure. If potential danger exists, proceed as follows: R Release button & to stop the closing procedure. To open, press and hold button % . To continue the closing procedure after making sure that there is no danger of anyone being harmed by the closing procedure, press and hold button & .
conditions, drive only with at least one window fully open at all times. Automatic transmission Gearshift pattern for automatic transmission : Button for selecting park position P j Park position k Re.
X Make sure the KEYLESS-GO start/stop button is inserted in the starter switch ( Y page 80). i To start the engine with the SmartKey instead of the KEYLESS-GO function, remove the KEYLESS-GO start/stop button from the starter switch. Proceed as described in “With SmartKey” ( Y page 104).
is restricted in order to protect it from damage. Avoid driving your vehicle at full speed when the engine is cold to prevent premature engine wear and/or diminished comfort. ! If an acoustic warning sounds and the message Release Parking Brake appears in the multifunction display when driving off, you have forgotten to release the parking brake.
X Give very little gas. X Have the problem checked at an authorized Mercedes-Benz Center as soon as possible. The coolant temperature is above 248‡ (120†) The coolant is too hot and is no longer cooling the engine. X Stop the vehicle in a safe location as soon as possible.
X Releasing: Pull on release handle : . When the ignition is switched on or the engine is running, the brake warning lamp $ (USA only) or J (Canada only) in the instrument cluster goes out.
Otherwise the vehicle could roll away which could result in an accident and/or serious personal injury. i In an emergency you can turn off the engine while driving by pressing and holding the KEYLESS-GO start/stop button for approximately 3 seconds.
something. Only shift into gear when the engine is idling normally and when your right foot is firmly on the brake pedal. ! The vehicle must be stopped when you shift the automatic transmission R dire.
transmission into park position P automatically. Remaining in neutral position N If you want the automatic transmission to remain in neutral position N , e.g. when taking the vehicle through an automatic conveyor- type car wash, observe the following instructions.
Transmission positions The current transmission position appears in the multifunction display. : Transmission position indicator If the current transmission position does not appear in the multifunction display due to a malfunction, for example, make sure that the automatic transmission is in the desired position.
Effect A Neutral position No power is transmitted from the engine to the drive axle. When the brakes are released, the vehicle can be moved freely (pushed or towed). To avoid damage to the transmission, never shift the automatic transmission into neutral position N while driving.
The current gear range appears in the multifunction display. : Gear range indicator Effect = With this selection you can use the braking effect of the engine.
One-touch gearshifting With the automatic transmission in drive position D , you can limit or extend the gear range using the steering wheel gearshift control. ML 63 AMG: You only can limit or extend the gear range when driving in automatic program mode C or S .
upshifting or downshifting using the steering wheel gearshift control. Program mode selector switch C Comfort For standard driving S Sport For sporty driving M Manual For manual gearshifting The current program mode appears in the multifunction display ( Y page 114).
X Briefly pull left gearshift control : ( Y page 115). The automatic transmission shifts into the next lower gear. i For maximum acceleration, pull and hold the left gearshift control. Depending on the engine speed the automatic transmission selects the optimal gear for maximum acceleration.
G Warning! No messages will be displayed if either the instrument cluster or the multifunction display is inoperative. As a result, you will not be able to see information about your driving condition.
Tachometer The red marking on the tachometer ( Y page 29) denotes excessive engine speed. ! Avoid driving at excessive engine speeds, as it may result in serious engine damage that is not covered by the Mercedes-Benz Limited Warranty. To help protect the engine, the fuel supply is interrupted if the engine is operated within the red marking.
Press button W X to select submenus in the Settings menu to set values to operate the RACETIMER 11 to set the volume Press button ? to turn Voice Control System on 12 , see separate operating instruct.
Multifunction display : Trip odometer ; Main odometer = Transmission position/gear range indicator ? Automatic transmission program mode indicator 13 A Outside temperature or digital speedometer For more information on menus displayed in the multifunction display, see “Menus and submenus” ( Y page 121).
Function ? Audio/DVD menu ( Y page 126) A Navigation menu ( Y page 127) B AIRMATIC/Compass menu ( Y page 127) C Distronic menu ( Y page 128) D Vehicle status message memory 15 menu ( Y page 128) E Set.
The engine should not be operated with a coolant temperature above 248‡ (120†). Doing so may cause serious engine damage which is not covered by the Mercedes-Benz Limited Warranty.
: Vehicle supply voltage indicator RACETIMER G Warning! The RACETIMER feature is only for use on roads and in conditions where high speed driving is permitted. Racing on public roads is prohibited under all circumstances. The driver is and must always remain responsible for following posted speed limits.
Deleting all laps It is not possible to delete a single saved lap. When you turn off the engine, the RACETIMER will be reset to “0” after 30 seconds. All laps are deleted. X Press button W while the timer is running. The timer stops. X Press the reset button in the instrument cluster twice ( Y page 118).
X Press button V or U repeatedly until the Off-road Mode menu appears in the multifunction display. X Press button W or X to switch the off-road driving program On or Off . The symbol Ç appears in the lower multifunction display. The setting is stored when you turn off the engine.
Operating audio devices/audio media X Switch on the COMAND system and select the audio device or audio media. Refer to separate COMAND system operating instructions. X Press button V or U repeatedly until the Audio/DVD menu appears in the multifunction display.
Vehicles with steel suspension: Vehicles with air suspension or ML 63 AMG: For information on air suspension, see “Air suspension program” ( Y page 155). For information on the compass, see “Compass” ( Y page 207). Distronic menu Use the Distronic menu to display the current settings for your Distronic system.
Should the vehicle’s system record any conditions while driving, the number of messages will reappear in the multifunction display when the SmartKey in the starter switch is turned to position 0 or removed from the starter switch.
Submenus in the Settings menu X Press button V or U repeatedly until the Settings menu appears in the multifunction display. X Press button & . The collection of the submenus appears in the multifunction display. There are more submenus than can be displayed simultaneously.
R Selecting language ( Y page 131) R Selecting display (digital speedometer or outside temperature) for status indicator ( Y page 131) Selecting speedometer/odometer display mode (Canada only) X Press button V or U repeatedly until the Settings menu appears in the multifunction display.
X Move the selection marker with button W or X to the Instrument Cluster submenu. X Press button & or * repeatedly until the message Status Line Display appears in the multifunction display. The selection marker is on the current setting. X Press button W or X to select the desired setting.
Example illustration for setting the month X Press button W or X to set the month, day, or year. Lighting submenu Access the Lighting submenu via the Settings menu.
R License plate lamps R Side marker lamps R Front fog lamps The locator lighting goes out when the driver’s door is opened. If you do not open the driver’s door after unlocking the vehicle with the SmartKey, the lamps will go out automatically after approximately 40 seconds.
You can temporarily deactivate the headlamps delayed shut-off feature: X Before exiting the vehicle, turn the SmartKey in the starter switch to position 0 . X Then turn it to position 2 and back to position 0 . The headlamps delayed shut-off feature is deactivated.
The following functions are available: R Activating easy-entry/exit feature ( Y page 136) R Activating/deactivating the seat belt adjustment feature ( Y page 136) R Switching fold-in function for exte.
Switching fold-in function for exterior rear view mirrors on or off Use this function to set the exterior rear view mirrors to be folded in automatically when you lock your vehicle.
DSR (Downhill Speed Regulation) programmed default speed Use this function to program the default speed the DSR is set to when it is activated. You can program the default speed between 3 - 10 mph (Canada: 4- 18 km/h). The set value is increased in 1 mph (Canada: 2 km/h) increments.
: Distance driven since last reset ; Time elapsed since last reset = Average speed since last reset ? Average fuel consumption since last reset Resetting fuel consumption statistics X Press button U or V repeatedly until the message From Start appears in the multifunction display.
separate COMAND system operating instructions. X Switch on the COMAND system. Refer to separate COMAND system operating instructions. X Press button U or V repeatedly until the message TEL appears in the multifunction display. One of the following messages will appear in the multifunction display: R No Service : No network is available.
Redialing The control system stores the most recently dialed phone numbers. This eliminates the need to search through your entire phone book. X Press button U or V repeatedly until the message TEL appears in the multifunction display. X Press button 6 .
G Warning! When the cruise control is braking, the brake pedal is retracted (i.e. depressed automatically). The pedals’ range of motion must not be impeded by any obstacles: R Do not place any objects in the footwell. R Make sure that the floormats and carpets are securely in place.
R the ESP ® has switched off due to a malfunction R you shift the automatic transmission into neutral position N while driving Observe additional messages in the multifunction display that may appear. Depressing the accelerator pedal does not deactivate the cruise control.
X Briefly pull the cruise control lever in direction of arrow ? . If no speed is stored, the current speed is set and stored. X Remove your foot from the accelerator pedal.
inputs necessary to remain in control of the vehicle. High-frequency sources such as toll stations, speed measuring systems etc. can cause the Distronic system to malfunction. G Warning! The Distronic cannot take road and traffic conditions into account.
Distronic displays in the speedometer When the Distronic is activated, one or two cruise control speed segments come on around set speed : . The vehicle speed displayed on the speedometer can briefly vary from the speed setting on the Distronic system.
Distronic menu in the control system Use the DISTRONIC menu to display the current settings for your Distronic system. The information shown in the multifunction display depends on whether the Distronic system and/or the distance warning function are activated or deactivated.
After approximately 5 seconds the currently set speed appears in the status indicator of the multifunction display: R USA only: e.g. DTR 55 Miles R Canada only: e.
X Increasing: Briefly lift the cruise control lever up past the resistance point in direction of arrow : ( Y page 147). X Decreasing: Briefly press the cruise control lever down past the resistance point in direction of arrow ; ( Y page 147). X Release the cruise control lever.
G Warning! It is up to the driver to exercise discretion to select the appropriate setting given road conditions, traffic, driver’s preferred driving style and applicable laws and driving recommendations for safe following distance. X Increasing distance: Turn distance setting switch : in direction of arrow = .
Turns and bends In turns or bends, the Distronic may not detect a moving vehicle in front, or it may detect one too soon. This may cause your vehicle to brake late or unexpectedly. Offset driving A vehicle traveling in your lane but offset from your direct line of travel may not be detected by the Distronic.
G Warning! If the distance warning lamp · in the instrument cluster comes on while driving and/or an intermittent warning sounds, immediate attention on the part of the driver is required. As required by the traffic situation, apply the brakes and navigate around a possible obstacle.
a circumstance where rapid deceleration could result in a loss of vehicle control. The DSR regulates the vehicle’s speed in automatic transmission positions D , or R . i In addition, make use of the engine’s braking effect by shifting the automatic transmission into a lower gear.
i If the DSR is switched on at a speed above 20 mph (Canada: 30 km/h), the message DSR Max. Speed 20 MPH (Canada: 30 km/h ) appears in the multifunction display. For information on how to program the set speed while driving, see “Adjusting the DSR speed” ( Y page 154).
Reduce set speed: X Briefly press the cruise control lever down past the resistance point in direction of arrow ; . X Release the cruise control lever. The vehicle speed decreases in increments of 5 mph (Canada: 10 km/h). Each time the set speed is changed, DSR will appear in the multifunction display and the changed set speed is shown.
ML 63 AMG The air suspension program is part of the ML 63 AMG standard equipment range. Due to the vehicle’s sportier suspension tuning, in comparison with standard vehicles, the level positions in the ADS settings as well as the speed thresholds for raising and lowering the vehicle have been modified.
the vehicle lowers. When the temperature rises, the vehicle raises. The vehicle automatically regulates its ride height based on the set vehicle height and the current speed: R As your driving speed increases, the vehicle is lowered by increments until it reaches highspeed level.
Level Driving situation Raised level For off-road driving or driving in rough terrain. Indicator lamp ; is on. Highway level For driving on paved roads in fair or better condition. Indicator lamp ; is off. i The third available level is the highspeed level that is set automatically.
i The message can be cleared by pressing the V , U , & or * button on the multifunction steering wheel. When the raised level is reached, indicator lamp ; comes on continuously and the following m.
G Warning! If a drive wheel is spinning due to insufficient traction: R While driving off, apply as little throttle as possible. R While driving, ease up on the accelerator pedal. R Adapt your speed and driving style to the prevailing road conditions.
G Warning! Make sure no persons or animals are in or near the area in which you are parking/ maneuvering. Otherwise, they could be injured. ! Special attention must be paid to objects with smooth surfaces or low silhouettes (e.g. trailer couplings, painted posts, elevated crossbars or road curbs).
Front area warning indicators Rear area warning indicators Each warning indicator is divided into five yellow and two red distance segments for left side : and right side ; of the vehicle. The Parktronic system is ready to measure when the yellow readiness indicators = are illuminated.
Trailer towing The rear Parktronic sensors will be deactivated when you have established the electrical connection between your vehicle and the trailer you are about to tow. ! The distance between the sensors in the bumpers and an obstacle is referred to as the minimum range of the Parktronic.
R the immediate surroundings are illuminated with fluorescent light (the display may flicker) R there is a sudden change in temperature, e.g. if you drive into a heated garage from the cold (lens cond.
reverse gear R is engaged. To display the image again, disengage and reengage reverse gear R . X Switching off: Shift the automatic transmission into park position P , neutral position N , or drive position D .
Rear automatic climate control ( Y page 177) The rear automatic climate control allows separate climate settings for the rear compartment. Air vents G Warning! When operating the climate control, the air that enters the passenger compartment through the air vents can be very hot or very cold (depending on the set temperature).
Rear center console air vents : Left rear center air vent, adjustable ; Right rear center air vent, adjustable = Rear climate control panel When the front climate control panel is switched on or off, the air supply through the rear center air vents is also switched on or off.
Function Recommendation/Notes = Front defroster i Keep this setting selected only until the windshield or the side windows are clear again. ( Y page 171) ? Increasing air volume ( Y page 171) A Air distribution (directs air through the windshield and side air vents) ( Y page 171) B AC cooling on/off i Switches on the air conditioning.
Function Recommendation/Notes K Interior temperature sensor L Climate control on/off i Switches on the climate control system. The indicator lamp in button ^ goes out. ( Y page 169) Notes on climate control The climate control is operational whenever the engine is running.
the temperature set by the operator. In addition, the air conditioning dehumidifies the interior air and helps prevent window fogging. G Warning! If you switch off the air conditioning, the vehicle will not be cooled when weather conditions are warm. The windows can fog up more quickly.
in small increments, preferably starting at 72‡ (22†). X Increasing/decreasing: Turn temperature control : and/or C ( Y page 167) slightly clockwise or counterclockwise.
The indicator lamp in button ¦ goes out. The indicator lamp in button Á comes on. or X Turn temperature control : and/or C ( Y page 167) slightly in any direction. Heating switches to the temperature that was set before the front defroster was switched on.
i How long the system will provide heating depends on the coolant temperature and the battery voltage. Regardless of the temperature and air volume set on the climate control panel, an interior temperature is aimed at by 72‡ (22†) and the blower runs on low speed to protect the vehicle battery.
Function Recommendation/Notes : Temperature control, driver’s side i Set the temperature to 72‡ (22†). ( Y page 179) ; Air distribution and air volume (automatic mode) i Switches on the automatic mode.
Function Recommendation/Notes K Interior temperature sensor L Climate control on/off i Switches on the climate control system. The indicator lamp in button ^ goes out. ( Y page 178) Canada only Function Recommendation/Notes : Temperature control, driver’s side i Set the temperature to 72‡ (22†).
Function Recommendation/Notes C Air distribution, passenger side (directs air through the windshield and side air vents) ( Y page 180) D Operating the rear climate control from the front ( Y page 178) E Temperature control, passenger side i Set the temperature to 72‡ (22†).
Function Recommendation/Notes O Interior temperature sensor P Adopting driver’s side settings for all zones ( Y page 183) Rear automatic climate control : Increasing air volume ; Temperature control.
Deactivating the climate control system G Warning! When the climate control system is switched off, the outside air supply and circulation are also switched off. Only choose this setting for a short time. Otherwise the windows could fog up, impairing visibility and endangering you and others.
Activating Moist air can fog up the windows. You can dehumidify the interior air with the air conditioning. X Press button Á again. The indicator lamp in the button comes on. The air conditioning uses the refrigerant R134a. This refrigerant is free of CFCs which are harmful to the ozone layer.
increments, preferably starting at 72‡ (22†). Front temperature with front climate control panel USA only X Increasing/decreasing: Turn temperature control : and/or C ( Y page 173) slightly clockwise or counterclockwise.
Symbol Driver’s side Symbol Passenger side Function Z M Directs air to the windshield and side air vents P Directs air through the center, side and rear passenger compartment air vents c O Directs .
was set before the front defroster was switched on. The indicator lamp in button ¦ goes out. The indicator lamp in button Á comes on. or X Turn temperature control : and/or C (USA only) ( Y page 173) or : and/or E (Canada only) ( Y page 175) slightly in any direction.
i The manually selected air recirculation mode is deactivated automatically: R after 5 minutes if the outside temperature is below approximately 41‡ (5†) R after 5 minutes if the air conditioning .
X Switch on the ignition. X Switching on: Press button ª on the respective climate control panel. The indicator lamp in the button comes on. X Switching off: Press button ª again. The rear window defroster switches off when the battery voltage is too low.
Sunroof switch With the sunroof closed or raised, you can slide the sunroof screen forward and back. Sunroof screen X Switch on the ignition. Opening X Opening manually: Press and hold the sunroof switch to the resistance point in direction of arrow ; .
closing the tilt/sliding sunroof with greater force or without automatic reversal function. If the movement of the tilt/sliding sunroof is blocked during the closing procedure (e.g. by ice or pollution), the tilt/sliding sunroof will stop and open slightly.
The cargo compartment is the preferred place to carry objects. Always use cargo tie-down rings, and if so equipped, always use the cargo net when transporting cargo. Never drive a vehicle with the tailgate open. Deadly carbon monoxide (CO) gases may enter vehicle interior resulting in unconsciousness and death.
G Warning! Only use carriers when the basic carrier bars have been completely mounted. The left and right roof rails are only stabilized by means of the basic carrier bars mounted. Follow the manufacturer’s installation instructions. Otherwise, an improperly attached carrier or its load could become detached from the vehicle.
Cargo tie down rings, second-row footwell Hooks Four hooks are located on the rear compartment trim panels, two on each side. Use the hooks to secure light-weight items only. The maximum permissible weight per hook is 9 lbs (4 kg). Expanding cargo volume You can separately fold the left and right rear seat backrests to expand the cargo volume.
X Lower the rear seat head restraints completely ( Y page 84). X Pull release handle = . A red indicator A will be visible and seat backrest ? is released. X Fold seat backrest ? forward. Returning rear seat backrest to original position ! Make sure that the seat belt is not pinched when folding rear seat backrest.
X Rolling out: Pull cargo compartment cover blind on handle : across the cargo compartment. X Guide cargo compartment cover blind into mounts ; and release.
tie-down rings in the cargo compartment ( Y page 188). X Open the hook and loop fasteners on the cargo net package. X Roll out the cargo net. X Unfold the cargo net.
storing objects in the vehicle. Put luggage or cargo in the cargo compartment if possible. Do not pile luggage or cargo higher than the seat backrests. If so equipped, always use the cargo net when transporting cargo. The cargo net cannot secure hard or heavy objects.
E ( Y page 202) are located in the storage compartment. X Opening storage compartment: Pull button : and lift up armrest. Coin holders = are located in front of storage compartment ; . Rear storage compartments Depending on vehicle equipment, your vehicle may not be equipped with three storage compartments in the front of the rear seats.
X Removing: Hold cup holder at its bridge ; and pull out bridge in direction of arrow. X Pull cup holder : out in direction of arrow. X Reinstalling: First, insert cup holder : and then insert bridge ; . Cup holder in rear armrest X Fold down the rear armrest.
Vanity mirror Vanity mirror lamp = only functions when sun visor : is engaged in mounting C . X Flip sun visor down. X Lift up vanity mirror cover ? . Vanity mirror lamp = comes on. Ashtrays Center console ashtray i A storage compartment is located under the ashtray insert.
X Switch on the ignition. X Push in cigarette lighter : . Cigarette lighter : will pop out automatically when hot. X Take out cigarette lighter : . X Reinsert cigarette lighter : in its socket after use.
Cargo compartment 115V AC Socket G Warning! The 115V AC socket operates at high voltage. Use the 115V AC socket in the vehicle with the same caution and prudence that you exercise when using power outlets at home. Keep any fluids away from the 115V AC socket.
X Start the engine. R The temperature of the DC/AC inverter is temporarily too high. X Pull the plug of the small device out of 115V AC socket : and plug it in again after waiting a few minutes. R Some small devices have a continuous power rating of less than 150 W but a very high switch-on current.
R The indicator lamp in the SOS button does not come on during the system self-test. R The indicator lamp in Roadside Assistance button º does not come on during the system self-test. R The indicator lamp in Information button E does not come on during the system self-test.
Should this occur, assistance must be summoned by other means. i The “911” emergency call system is a public service. Using it without due cause is a criminal offense. Initiating an emergency call manually X Briefly press on cover : to open. X Press SOS button ; briefly.
A voice connection between the Roadside Assistance dispatcher and the occupants of the vehicle will be established. X Describe the nature of the need for assistance.
i If the indicator lamp in Information button : is flashing continuously and there was no voice connection to the Customer Assistance Center established, then the Tele Aid system could not initiate an Information call (e.g. the relevant cellular phone network is not available).
20 seconds until the indicator lamp in the SOS button is flashing. The message Connecting Call appears in the multifunction display. As an alternative, you may unlock the vehicle via Internet in the “My Tele Aid” section of “Owner’s Online”, using your ID and password (USA only).
Hand-held remote control A is not part of the vehicle equipment. Programming the integrated remote control X Step 1: Switch on the ignition. X Step 2: If you have previously programmed a signal transmitter button and wish to retain its programming, proceed to step 3.
X Step 10: Return to the vehicle and firmly press, hold for 2 seconds and release the programmed signal transmitter button ( ; , = or ? ). X Step 11: Press, hold for 2 seconds and release same signal transmitter button a second time to complete the training process.
Erasing the integrated remote control memory i If you sell your vehicle, erase the codes of all three channels. X Switch on the ignition. X Simultaneously press and hold outer signal transmitter buttons ; and ? , for approximately 20 seconds, until indicator lamp : flashes rapidly.
wheel repeatedly until the AIRMATIC/ Compass menu appears in the multifunction display. The compass displays the direction into which the vehicle is currently traveling: N , NE , E , SE , S , SW , W , or NW . i If your vehicle is not equipped with air suspension program, the multifunction display will show the compass only.
Vehicle equipment ............................ 210 The first 1000 miles (1500 km) ....... 210 At the gas station ............................. 210 Engine compartment ........................ 212 Tires and wheels ............................... 218 Winter driving .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
! Never refuel vehicles with gasoline engine with diesel fuel. Never refuel vehicles with diesel engine with gasoline. Even small amounts of incorrect fuel will damage the fuel system and engine.
The fuel filler flap is located on the right-hand side of the vehicle towards the rear. X Turn off the engine. i Leaving the engine running and the fuel filler cap open can cause the yellow fuel tank reserve warning lamp to flash and the malfunction indicator lamp ! (USA only) or ; (Canada only) to illuminate.
This could cause the hood to come loose and injure you and/or others. G Warning! HYBRID vehicles: It is imperative that you read the HYBRID Supplemental Operating Instructions included in your vehicle literature portfolio. You may otherwise not receive all necessary safety information and warning for the operation of your vehicle.
X Press and hold handle ; . The hood is unlocked. X Pull up on the hood in direction of arrow and then release it. The hood will be held open at shoulder height by gas-filled struts automatically. Closing G Warning! When closing the hood, use extreme caution not to catch hands or fingers.
Example illustration: Gasoline engine Example illustration: Diesel engine X Pull out oil dipstick : . X Wipe oil dipstick : clean. X Slowly insert oil dipstick : fully into the dipstick guide tube. X Pull out oil dipstick : again after approximately 3 seconds to obtain accurate reading.
ML 63 AMG X Unscrew filler cap : from filler neck. X Add engine oil as required. Be careful not to overfill with oil. Be careful not to spill any oil when adding. Avoid environmental damage caused by oil entering the ground or water. ! Excess oil must be siphoned or drained off.
The coolant level is correct if the level R for cold coolant: reaches marking bar : in coolant expansion tank = R for warm coolant: is approximately 0.6 in (1.5 cm) higher X Add coolant as required. X Screw cap ; back on and tighten it. For more information on coolant, see the “Technical data” section ( Y page 358) and ( Y page 362).
The brake fluid level is correct when it is between lower mark (MIN) ; and upper mark (MAX) : of the brake fluid reservoir. Tires and wheels Safety notes Contact an authorized Mercedes-Benz Center for information on tested and recommended rims and tires for summer and winter operation.
sharply reduced at tread depths of less than 1 / 8 in (3 mm). R When replacing individual tires, you should mount new tires on the front wheels first (on vehicles with same-sized wheels all around). Recommended tire inflation pressure G Warning! Follow recommended tire inflation pressures.
pressures : for maximum loaded vehicle weight. The tire inflation pressures listed apply to the tires installed as original equipment. Important notes on tire inflation pressure G Warning! If the tire.
Example illustration: Tire inflation pressures for particular tire sizes Some tire inflation pressure labels may only show the rim diameter instead of the entire tire size, e.g. R 18 or 18" . The rim diameter is part of the tire size as specified on the tire sidewall ( Y page 236).
Do not overload the tires by exceeding the specified load limit as indicated on the Tire and Loading Information placard on the driver’s door B-pillar. Overloading the tires can overheat them, possibly causing a blowout. Overloading the tires can also result in handling or steering problems, or brake failure.
i The recommended tire inflation pressures for your vehicle can be found on R the Tire and Loading Information placard located on the driver’s door B-pillar ( Y page 227) R the tire inflation pressure label on the inside of the fuel filler flap The tire inflation pressures are not listed in the Operator’s Manual.
The TPMS is equipped with a combination low tire pressure/ TPMS malfunction telltale in the instrument cluster. Depending on how the telltale illuminates, it indicates a low tire pressure condition or a malfunction in the TPMS system itself: R If the telltale illuminates continuously, one or more of your tires is significantly underinflated.
malfunction using the TPMS telltale flashing and illumination sequence. The telltale extinguishes after a few minutes driving if the malfunction has been corrected. Tire pressure inquiries are made using the multifunction display. The current tire inflation pressure for each tire appears in the multifunction display after a few minutes of driving.
The respective tire is indicated by a red rectangle. Restarting Advanced TPMS G Warning! It is the driver’s responsibility to set the tire inflation pressure to the recommended cold tire inflation pressure. Underinflated tires affect the ability to steer or brake the vehicle.
punctured or damaged by road debris, potholes etc. i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration. This is the maximum permissible tire inflation pressure : for the tire.
Tire and Loading Information placard i Data shown on Tire and Loading Information placard example are for illustration purposes only. Load limit data are specific to each vehicle and may vary from data shown in the following illustration. Refer to Tire and Loading Information placard on vehicle for actual data specific to your vehicle.
X Step 5: Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in step 4. X Step 6 (if applicable): If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle.
Example 1 Example 2 Example 3 Step 1 Combined weight limit of occupants and cargo from Tire and Loading Information placard 1 500 lbs 1 500 lbs 1 500 lbs Example 1 Example 2 Example 3 Step 2 Number of.
Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for either the front or rear axle. You can obtain the GVWR and GAWR from the certification label. The certification label can be found on the driver’s door B-pillar, see the “Technical data” section ( Y page 346).
You may only use the MOExtended system in conjunction with the tire pressure loss warning system ( Y page 222) or the Advanced TPMS ( Y page 223). i Vehicles with MOExtended system are not factory-equipped with a TIREFIT kit. When retrofitting with tires that do not have run-flat characteristics, e.
recommended minimum tire tread depth for winter tires is 1 / 6 in (4 mm). Treadwear indicator : appears as a solid band across the tread. Storing tires ! Keep unmounted tires in a cool, dry place with as little exposure to light as possible. Protect tires from contact with oil, grease and fuels.
tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.
dimension front vs. rear), tire rotation is not possible. If applicable to your vehicle’s tire configuration, tires can be rotated according to the tire manufacturer’s recommended intervals in the tire manufacturer’s warranty pamphlet located in your vehicle literature portfolio.
Tire size designation, load and speed rating : Tire width ; Aspect ratio in % = Radial tire code ? Rim diameter A Load index B Speed symbol i For illustration purposes only. Actual data on tires are specific to each vehicle and may vary from data shown in above illustration.
For example, a load rating of 91 corresponds to a maximum load of 1356 lb (615 kg) the tire is designed to support. See also “Maximum tire load” ( Y page 231) where the maximum load associated with the load index is indicated in kilograms and lbs.
Index Speed rating H M+S 20 up to 130 mph (210 km/h) V M+S 20 up to 149 mph (240 km/h) i Not all M+S rated tires provide special winter performance. Make sure the tires you use show M+S and the mountain/ snowflake i marking on the tire sidewall.
The TIN is a unique identifier. The TIN facilitates efforts by tire manufactures to notify purchasers in recall situations or other safety matters concerning tires.
radio, and heater, to the extent that these items are available as factory-installed equipment (whether installed or not). Air pressure The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi), kilopascal (kPa), or bar.
Maximum loaded vehicle weight The sum of curb weight, accessory weight, total load limit, and production options weight. Maximum permissible tire inflation pressure This number is the greatest amount of air pressure that should ever be put in the tire.
Tread The portion of a tire that comes into contact with the road. Treadwear indicators Narrow bands, sometimes called “wear bars” that show across the tread of a tire when only 1 / 16 in (1.6 mm) of tread remains. TWR (Tongue Weight Rating) Maximum permissible weight on trailer tongue.
After installing winter tires: X Check the tire inflation pressure and adjust it if necessary ( Y page 221). X Restart the tire pressure loss warning system ( Y page 222) or the Advanced Tire Pressure Monitoring System ( Y page 223).
position N . Try to keep the vehicle under control by corrective steering action. i For information on driving with snow chains, see “Snow chains” ( Y page 243). Road salts and chemicals can adversely affect braking efficiency. Increased pedal force may become necessary to produce the normal brake effect.
Brakes Downhill grades ! When driving down long and steep grades, relieve the load on the brakes by shifting into a lower gear to use the engine’s braking power. This helps prevent overheating of the brakes and reduces wear. When using the engine’s braking power, a drive wheel may not spin for an extended period of time, e.
Only install brake pads and use brake fluid recommended by Mercedes-Benz. G Warning! If other than recommended brake pads are installed, or other than recommended brake fluid is used, the braking properties of the vehicle can be degraded to an extent that safe braking is substantially impaired.
The brakes may produce a squeaking-type noise depending on the R vehicle speed R brake force applied R ambient conditions, e.g. temperature and humidity As with any brake system, the wear of individual brake system components such as brake pads or disks strongly depends on your driving style and the conditions under which you operate the vehicle.
For more information, see “Driving through water” ( Y page 251). Off-road driving G Warning! Do not load items on the basic carrier bars. It may cause instability during some maneuvers which could result in an accident. Drive slowly in unknown terrain.
! Observe the following during off-road driving: R Keep doors, tailgate, windows, and tilt/ sliding sunroof closed whenever driving off-road. R Adjust vehicle speed to condition of terrain. The more uneven, rutty and steeper the terrain, the lower the speed should be.
Driving in steep terrain Slope angle : Overhang angle, front ; Overhang angle, rear Vehicles with steel suspension : : 21 ; 27° 22° 26° Vehicles with air suspension program : : 21 ; Raised level 31.
The 4-ETS recognizes the situation and limits the torque for the front wheels by braking them. Simultaneously the torque for the rear wheels is increased. Driving across a hilltop Decelerate just ahead of a hilltop (do not shift automatic transmission into neutral position N ), to prevent the vehicle from speeding up too much after climbing a hill.
! Never accelerate before driving into the water. The bow wave could force water into the engine and auxiliary equipment, thus damaging them. R Drive through the water slowly and at a constant speed. R Do not stop vehicle while immersed in water, and do not shut off the engine.
When driving on sand, observe the following rules: R Vehicles with air suspension program: Set the raised level ( Y page 156). R Avoid high engine speeds. R Shift automatic transmission into a gear range that is appropriate for the terrain. R In sandy soil, drive at a steady speed as conditions permit.
R Check for brush or branches caught in the underbody. ! Brush or branches could increase the possibility of a fire, as well as cut fuel and/ or brake lines, puncture rubber bellows of the axles or drive shafts.
The lowest value listed must be selected when determining how the vehicle and trailer are loaded. R The tongue weight at the hitch ball must be added to the rear axle weight to prevent exceeding the rear Gross Axle Weight Rating (GAWR). The GAWR is indicated on the certification label located on the driver’s door B-pillar ( Y page 227).
X Close all doors and the tailgate. X Attach the trailer. X Plug in all electrical connectors. i Vehicles with vehicle level control: When you are towing a trailer, the vehicle level always remains in the highway setting.
Avoid riding the brakes, thus overheating the vehicle and trailer brakes (if so equipped). R If the engine coolant rises to an extremely high temperature when the air conditioning is on, turn off the air conditioning system.
If you choose to use the telephone 22 while driving, please use the hands-free device and only use the telephone when road, weather and traffic conditions permit. Some jurisdictions prohibit the driver from using a mobile telephone while driving a vehicle.
appear while you are driving or when you switch on the ignition (example service A): Service A In XXXXX Miles (km) Service A In XX Days Service A In X Day Service A Due Now Refer to Maintenance Booklet for a listing of maintenance services and intervals they need to be performed at.
Do not confuse the maintenance service indicator with the engine oil level indicator 4 . Resetting the maintenance service indicator In the event that the maintenance service on your vehicle is not carried out at an authorized Mercedes-Benz Center, you can have the maintenance service indicator reset.
More frequent washings are necessary to deal with unfavorable conditions: R near the ocean R in industrial areas (smoke, exhaust emissions) R during winter operation You should check your vehicle from time to time for stone chipping or other damage. Any damage should be repaired as soon as possible to prevent corrosion.
damage (i.e. chips from stones, vehicle doors, etc.). Engine cleaning Prior to cleaning the engine compartment, make sure to protect electrical components and connectors from contact with water and cleaning agents. Corrosion protection, such as MB Anticorrosion Wax should be applied to the engine compartment after every engine cleaning.
! Do not use chrome cleaner on ornamental moldings. Although ornamental moldings may have chrome appearance, they could be made of anodized aluminum that will be damaged when cleaned with chrome cleaner. Instead, use a damp cloth to clean those ornamental moldings.
! Do not clean the camera and the area around the camera R with a high-pressure cleaner R with a dry cloth and strong pressure R with aggressive cleaning agents You could otherwise damage the camera. Cleaning the windows and the wiper blades ! Never open the hood when the wiper arms are folded forward.
steering wheel. Cleaners containing solvents will make the surface porous and vehicle occupants could suffer serious injuries from plastic parts coming loose in the event of air bag deployment. ! Do not use oil, wax or scouring agents. Otherwise you may scratch or damage the surface.
! To avoid damage to leather upholstery: R Wipe with light pressure only. R Do not clean with abrasive cleaning agents such as scouring milk or powder. R Do not soak the leather upholstery. As leather is a natural product, it could otherwise harden or become porous.
Vehicle equipment ............................ 268 Where will I find ...? .......................... 268 Vehicle status messages in the multifunction display ....................... 272 What to do if … .................................. 297 Unlocking/locking manually .
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
X Release securing hook = (located below the floor handle) from holder. X Engage securing hook = on upper cargo compartment lip ? . ! With the cargo compartment cover blind installed behind the rear seats, disengage cargo compartment cover blind and flip it forward.
Vehicles with spare wheel Example illustration : Electric air pump 28 ; Storage well casing = Alignment bolt ? Towing eye bolt A Wheel wrench X To access remaining tools: Remove storage well casing ; (if so equipped). X Remove the spare wheel ( Y page 271).
Storage position X Take the reversible ratchet from the vehicle tool kit ( Y page 268). Operational position X Attach reversible ratchet ; to jack : in such a way that the word UP can be seen. Before placing the jack and the reversible ratchet back into the vehicle tool kit: X Fully collapse the jack (storage position).
Vehicle status messages in the multifunction display Notes Warning and malfunction messages appear in the multifunction display located in the instrument cluster. Certain warning and malfunction messages are accompanied by an audible signal. Address these messages accordingly and follow the additional instructions given in this Operator’s Manual.
Text messages Safety systems Display messages Possible causes/consequences and M Solutions ABS ABS, ESP Inoperativ e See Operator’s Manual The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the ESP ® , and the PRE- SAFE ® system are unavailable.
Display messages Possible causes/consequences and M Solutions ESP Unavailabl e See Operator’s Manual The brake system still functions normally but due to insufficient power supply the ESP ® , the BAS, and the PRE-SAFE ® system are unavailable. X Continue driving with added caution.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Enabled See Operator’s Manual USA only: The front passenger front air bag is activated while driving even though a child, small individual, or object below the system’s weight threshold is on the front passenger seat, or the front passenger seat is empty.
Display messages Possible causes/consequences and M Solutions If above conditions are met, you can occupy the front passenger seat again. Depending on the front passenger classification sensed by the OCS, the 42 indicator lamp will remain illuminated or go out.
Display messages Possible causes/consequences and M Solutions Front Passenger Airbag Disabled See Operator’s Manual USA only: The front passenger front air bag is deactivated while driving even though an adult or someone larger than a small individual is occupying the front passenger seat.
G Warning! If the 42 indicator lamp remains illuminated with an adult occupant on the front passenger seat even after performing the above corrective steps, do not have any passenger use the front passenger seat until the system has been repaired.
Display messages Possible causes/consequences and M Solutions DISTRONIC Currently Unavailabl e See Operator’s Manual Distronic is deactivated because: R The Distronic cover in the radiator grille is dirty. R The functionality is impaired by heavy precipitation or fog.
Vehicle Display messages Possible causes/consequences and M Solutions Depress brake to shift out of P. You have attempted to shift the automatic transmission into drive position D , reverse gear R or neutral position N without depressing the brake pedal.
Tires Display messages Possible causes/consequences and M Solutions Check tires, then restart Run Flat Indicator. There has been a warning message about a loss in the tire inflation pressure and the tire pressure loss warning system was not restarted yet.
Display messages Possible causes/consequences and M Solutions Tire Pressure Monitor Wheel Sensor Missing At least one sensor is defect (e.g. battery is empty). The respective tire is indicated by – – instead of the tire inflation pressure in the multifunction display.
Display messages Possible causes/consequences and M Solutions Check Tire(s) The tire inflation pressure in at least one tire is significantly below the reference value. The respective tire is indicated in the multifunction display. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Display messages Possible causes/consequences and M Solutions $ (USA only) J (Canada only) EBV, ABS, ESP Inoperativ e See Operator’s Manual The brake system is still functioning normally but due to a malfunction, the ABS, the BAS, the EBP, the ESP ® , and the PRE-SAFE ® system are unavailable.
Safety systems Display messages Possible causes/consequences and M Solutions G Tele Aid Inoperativ e One or more main functions of the Tele Aid system are malfunctioning. X Have the Tele Aid system checked at an authorized Mercedes-Benz Center. + Restraint Sys.
Display messages Possible causes/consequences and M Solutions Á Compressor Cooling Down You have selected a higher vehicle level. Due to frequent level changes within a short period, the compressor must cool down first. ! When the message Compressor Cooling Down appears in the multifunction display, driving is still possible.
Display messages Possible causes/consequences and M Solutions + Remove Key You have forgotten to remove the SmartKey. X Remove the SmartKey from the starter switch. + You need a new key. The SmartKey is malfunctioning. X Contact an authorized Mercedes-Benz Center.
Display messages Possible causes/consequences and M Solutions ~ Bluetooth Ready The telephone has not yet been connected to the COMAND system via Bluetooth ® . X Connect the telephone to the COMAND system via Bluetooth ® . ¥ Top Up Washer Fluid The fluid level has dropped to approximately 1 / 3 of total reservoir capacity.
Display messages Possible causes/consequences and M Solutions ? Coolant Stop car, switch engine off. The coolant is too hot. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Engage the parking brake. X Only start the engine again after the message disappears.
Display messages Possible causes/consequences and M Solutions ? Coolant Stop car, switch engine off. The poly-V-belt could be broken. X Stop the vehicle immediately as soon as it is safe to do so. X Turn off the engine immediately. X Check the poly-V-belt.
Display messages Possible causes/consequences and M Solutions # Battery/ Alternator Stop Vehicle The battery is defective. X Stop the vehicle in a safe location or as soon as it is safe to do so. X Engage the parking brake. X Do not continue to drive.
Display messages Possible causes/consequences and M Solutions 8 Gas Cap Open A loss of pressure has been detected in the fuel system. The fuel cap may not be closed properly or the fuel system may be leaking. X Check the fuel cap ( Y page 212). X If it is not closed properly: Close the fuel cap.
Lamps Display messages Possible causes/consequences and M Solutions b Active Headlamps Inoperativ e The active Bi-Xenon headlamp system is malfunctioning. X Contact an authorized Mercedes-Benz Center as soon as possible. b Reverse Lamp Left or Reverse Lamp Right The left or right backup lamp is malfunctioning.
Display messages Possible causes/consequences and M Solutions b Parking Lamp Front Left or Parking Lamp Front Right The left or right front parking lamp is malfunctioning. A substitute bulb is being used. X Replace the bulb as soon as possible ( Y page 311).
Display messages Possible causes/consequences and M Solutions b Switch Off Lights You have removed the SmartKey from the starter switch, opened the driver’s door and left the headlamps on or removed the SmartKey with KEYLESS-GO from the vehicle and left the headlamps on.
Display messages Possible causes/consequences and M Solutions b Turn Signal Rear Left or Turn Signal Rear Right The left or right rear turn signal lamp is malfunctioning. A substitute bulb is being used. X Rear lamps with bulbs: Replace the bulb as soon as possible ( Y page 311).
Display messages Possible causes/consequences and M Solutions h Tire Pressure Check Tires The tire inflation pressure in at least one tire is significantly below the reference value. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
Brake Problem Possible causes/consequences and M Solutions ! The yellow ABS indicator lamp comes on while the engine is running. The ABS has detected a malfunction and switched off. The BAS, the ESP ® and the PRE-SAFE ® are also switched off. The brake system is still functioning normally but without the systems specified above available.
Problem Possible causes/consequences and M Solutions $ (USA only) J (Canada only) ! d The red brake warning lamp comes on while driving. In addition, the yellow ABS malfunction indicator lamp, and the yellow ESP ® warning lamp come on and an acoustic warning sounds.
Safety systems Problem Possible causes/consequences and M Solutions 7 The red seat belt telltale comes on for a maximum of 6 seconds after starting the engine. The seat belt telltale reminds you and your passengers to fasten your seat belts before driving off.
i After 60 seconds with an unfastened seat belt the warning chime stops sounding and the seat belt telltale illuminates continuously. The seat belt telltale will only go out if both, the driver and front passenger’s seat belt are fastened, or the vehicle is standing still and a front door is opened.
Problem Possible causes/consequences and M Solutions d The yellow ESP ® warning lamp flashes while driving. The ESP ® or the ETS/4-ETS has come into operation because of detected traction loss in at least one tire. The cruise control is deactivated.
Vehicle Problem Possible causes/consequences and M Solutions The yellow fuel tank reserve warning lamp in the fuel gauge comes on while driving. The fuel level has gone below the reserve mark.
Tires Problem Possible causes/consequences and M Solutions h USA only: Combination low tire pressure telltale/TPMS malfunction telltale for the Advanced TPMS illuminates continuously. The Advanced TPMS detects a loss of pressure in at least one tire. X Carefully bring the vehicle to a halt, avoiding abrupt steering and braking maneuvers.
sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.
G Warning! If the 42 indicator lamp illuminates and remains illuminated with the weight of a typical adult or someone larger than a small individual on the front passenger seat, do not have any passenger use the front passenger seat until the system has been repaired.
SmartKey with KEYLESS-GO X Move locking tab : in the direction of arrow. X Slide mechanical key ; out of the housing. Unlocking the driver’s door X Insert mechanical key ; into the driver’s door lock. X Turn mechanical key ; counterclockwise to position 1 .
A minimum height clearance of 7.2 ft (2.20 m) is required to open the tailgate. X Remove cover ; from the trim on the tailgate. X Push emergency release lever : all the way to the left. ! The tailgate swings open upwards automatically. Always make sure there is sufficient overhead clearance.
Resetting activated NECK-PRO active front head restraints If the NECK-PRO active front head restraints have been triggered in a rear-end collision, they must be reset. You can tell that the NECK-PRO active front head restraints have been triggered when they have been moved forward and cannot be adjusted.
i The required replacement batteries are available at any authorized Mercedes-Benz Center. Replacement batteries: Lithium, type CR 2025 or equivalent. X Remove the mechanical key from the SmartKey ( Y page 306). SmartKey X Press mechanical key ; into the SmartKey opening until battery compartment cover : opens.
Replacing bulbs Safety notes Safe vehicle operation depends on proper exterior lighting and signaling to a large degree. Correct headlamp adjustment is extremely important. Have headlamps checked and readjusted at regular intervals and when a bulb has been replaced.
Bulbs You can replace the following bulbs yourself: Halogen headlamps Type : Low-beam lamp: H7 55 W ; High-beam lamp/High-beam flasher lamp: H7 55 W = Parking and standing lamp: W 5 W ? Turn signal la.
LED rear lamps Type : Backup lamp: W 16 W ; Rear foglamp (driver’s side only): W 16 W = Rear foglamp (driver’s side only): W 16 W License plate lamps Type : License plate lamps: C 5 W Notes on bulb replacement ! Do not replace LEDs or bulbs not described in this section.
Example illustration: Driver’s side headlamp : Housing cover for low-beam halogen or Bi- Xenon headlamp ; Housing cover for high-beam halogen bulb (high beam and high-beam flasher) = Bulb socket for.
X Turn housing cover ; counterclockwise and remove it. X Turn bulb socket C with the bulb counterclockwise and remove it. X Pull the bulb out of bulb socket C . X Gently press the new bulb into bulb socket C . X Place bulb socket C back into the housing and turn it clockwise until it engages.
Opening the passenger-side trim panel X Insert a suitable object such as a coin into the slot of lock : . X Turn lock : by 90° in direction of the arrow.
License plate lamps X Loosen screws : of lamp cover to be removed. X Remove lamp cover ; . X Replace the bulb. X Reinstall lamp cover ; . X Retighten screws : . Adjusting headlamp aim : V Vertical centerline ; H Horizontal mounting height, measured from the center Correct headlamp adjustment is extremely important.
i If it is not possible to obtain a proper headlamp adjustment, have the system checked at an authorized Mercedes-Benz Center. Replacing wiper blades Safety notes G Warning! For safety reasons, switch.
X Hold wiper arm : and disengage wiper blade ; by carefully sliding it in direction of arrow. X Remove wiper blade ; . Installing wiper blades Front wiper blades X With guide tab = sliding into opening ? , place wiper blade : onto wiper arm in direction of arrow.
G Warning! The dimensions of the spare wheel are different from those of the road wheels. As a result, the vehicle handling characteristics change when driving with a spare wheel mounted. Adapt your driving style accordingly. The spare wheel is for temporary use only.
damage caused by driving with extremely low tire inflation pressure, or on a flat tire, or a damaged wheel. Do not drive the vehicle under such circumstances. Contact the nearest authorized Mercedes- Benz Center for assistance or call Roadside Assistance.
Version 2 X Version 1 only: Open flap C on the electric air pump. X Pull plug ? and air hose A out of the pump housing. X Screw the air pump’s air hose A onto flange B of TIREFIT container : . X Stick TIREFIT container : upside down into notch ; of the electric air pump.
G Warning! The air hose can become hot during inflation. Please exercise appropriate caution. ! Do not operate the electric air pump longer than 8 minutes without interruption. Otherwise it may overheat. You may operate the air pump again after it has cooled off.
If the tire inflation pressure is at least 20 psi (1.3 bar), inflate or deflate the tire to the correct tire inflation pressure (see Tire and Loading Information placard on the driver’s door B-pillar): X To increase tire inflation pressure: Switch on the electric air pump.
sizeable objects before raising the vehicle with the jack. Do not disengage the parking brake while the vehicle is raised. Make sure that the ground on which the vehicle is standing and where you place the jack is solid, level and not slippery. If necessary, use a large underlay.
X Place wheel chocks or other sizeable objects on the downhill side in front of both wheels on the side opposite to the side on which the wheel is to be changed. X On the wheel to be changed, loosen but do not yet remove the wheel bolts (approximately one full turn with wheel wrench : ).
Removing the wheel X Unscrew the uppermost wheel bolt and remove it. X Replace this wheel bolt with alignment bolt : . X Remove the remaining bolts. ! Do not place wheel bolts in sand or dirt. This could result in damage to the wheel bolts and wheel hub threads.
X Guide the spare wheel onto the alignment bolt and push it on. X Insert the wheel bolts and tighten them slightly. X Unscrew the alignment bolt. X Install the last wheel bolt and tighten it slightly.
X Version 1 only: Close vent screw on air hose ? . X Remove the valve cap from the collapsible tire valve. X Screw union nut A onto the collapsible tire valve. X Make sure air pump switch ; is set to 0 . X Insert electrical plug = into the power outlet in the second-row footwell ( Y page 197).
Inflate the collapsible tire using the electric air pump before lowering the vehicle. X Attach ratchet to vehicle jack so that the word DOWN can be seen. Lower the vehicle until the vehicle is resting fully on its own weight: X Turn ratchet in direction DOWN .
significantly shorter or, if the vehicle is driven cautiously, somewhat longer. Do not continue driving in emergency mode if R you notice knocking sounds R the vehicle starts to shake R smoke develops.
i When the message Remaining Starts: 20 appears in the multifunction display, you can start the engine 20 more times. If you do not add AdBlue ® , the engine cannot be started beyond that point.
For more information on AdBlue ® , see ( Y page 361). The AdBlue ® filler neck is located under the cargo compartment floor. X Switch off the ignition. X Open the tailgate ( Y page 75). X Lift the cargo compartment floor ( Y page 268). X Turn AdBlue ® filler cap cover : counterclockwise and remove it.
X Place AdBlue ® filler cap cover : as illustrated and turn it clockwise to its stop. X Lower cargo compartment floor. X Close the tailgate. X Drive the vehicle at a speed of at least 10 mph (16 km/h). The message Check Additive See Operator’s Manual disappears after approximately 1 minute.
Battery fluid contains sulfuric acid. Do not allow this fluid to come in contact with eyes, skin or clothing. In case it does, immediately flush affected area with water and seek medical help if necessary. A battery will also produce hydrogen gas, which is flammable and explosive.
R Synchronize the power tilt/sliding sunroof ( Y page 186). R Synchronize the exterior rear view mirrors ( Y page 91). Charging the battery G Warning! Never charge a battery while still installed in the vehicle unless the accessory battery charge unit approved by Mercedes-Benz is being used.
damage the catalytic converter 31 and may present a fire risk. Make sure the jumper cables do not have loose or missing insulation. Make sure the cable clamps do not touch any other metal part while the other end is still attached to a battery.
Position C represents the charged battery of another vehicle or an equivalent starter pack. X Flip up cover : of positive terminal = in direction of arrow. ! Never invert the terminal connections! X Connect positive terminal ; of charged battery C with positive terminal = with a jumper cable.
portfolio. You may otherwise not recognize potential danger. ! To prevent damage during transport, do not tie down vehicle by its chassis or suspension parts.
Vehicles with AMG Sport Package X Press mark on cover : as indicated by the arrow. X Lift cover : off to reveal the threaded hole for the towing eye bolt. Removing cover in rear bumper G Warning! In order to avoid possible serious burns or injury, use extreme caution when removing the rear cover, because the rear exhaust pipe is extremely hot.
Fixing towing eye bolt Example illustration front bumper X Take the towing eye bolt and, if so equipped, the wheel wrench from the vehicle tool kit. X Screw towing eye bolt ; clockwise into threaded hole to its stop. X Insert wheel wrench into towing eye and tighten towing eye bolt ; by turning it clockwise.
Towing with the rear axle raised X Switch off the ignition and remove the SmartKey from the starter switch. X Switch on the hazard warning flasher ( Y page 96).
G Warning! Only use fuses approved by Mercedes-Benz with the specified amperage for the system in question and do not attempt to repair or bridge a blown fuse. Using other than approved fuses or using repaired or bridged fuses may cause an overload leading to a fire, and/or cause damage to electrical components and/or systems.
Example illustration fuse box ML 350 (ML 350 BlueTEC, ML 550, ML 63 AMG similar) X With a dry cloth, remove any moisture from fuse box cover : . X Opening: Pull clamps ; in direction of arrow. X Lift fuse box cover : up. X Closing: Make sure the sealing rubber is positioned properly.
Vehicle equipment ............................ 346 Parts service ..................................... 346 Warranty coverage ........................... 346 Identification labels .......................... 346 Vehicle specification ML 350 Blue- TEC 4MATIC (164.
Vehicle equipment i This Operator’s Manual describes all features, standard or optional, potentially available for your vehicle at the time of purchase. Please be aware that your vehicle might not be equipped with all features described in this manual.
The Vehicle Identification Number (VIN) can be found R on certification label : on the driver’s door B-pillar R on passenger side underneath the rear seat ( Y page 347) R on the lower edge of the windshield ( Y page 347) Example certification label (U.
Vehicle specification ML 350 BlueTEC 4MATIC (164.125) The quoted data apply only to the standard vehicle. Contact an authorized Mercedes- Benz Center for the corresponding data of all special bodies and special equipment. Engine ΜL 350 BlueTEC 4MATIC Engine, type 642 Mode of operation Diesel 4-stroke engine No.
Engine ΜL 350 Bore 3.66 in (92.90 mm) Stroke 3.39 in (86.00 mm) Total piston displacement 213.5 cu in (3 498 cm 3 ) Compression ratio 10.7:1 Output acc.
Engine ΜL 350 4MATIC Compression ratio 10.7:1 Output acc. to SAE J 1349 39 268 hp/6 000 rpm (200 kW/6 000 rpm) Maximum torque acc. to SAE J 1349 258 lb-ft/ 2 400 - 5 000 rpm (350 Nm/ 2 400 - 5 000 rp.
Engine ML 550 4MATIC Output acc. to SAE J 1349 43 382 hp/6 000 rpm (285 kW/6 000 rpm) Maximum torque acc. to SAE J 1349 391 lb-ft/ 2 800 - 4 800 rpm (530 Nm/ 2 800 - 4 800 rpm) Maximum engine speed 6 500 rpm Firing order 1-5-4-2-6-3-7-8 Poly-V-belt 2 398 mm Electrical system ML 550 4MATIC Alternator 14 V/180 A Starter motor 12 V/1.
Engine ML 63 AMG Maximum torque acc. to SAE J 1349 465 lb-ft/5 200 rpm (630 Nm/5 200 rpm) Maximum engine speed 7 200 rpm Firing order 1-5-4-2-6-3-7-8 Poly-V-belt 2 360 mm Electrical system ML 63 AMG Alternator 14 V/180 A Starter motor 12 V/2.1 kW Battery 12 V/95 Ah Spark plugs, type NGK ILZKAR 7A10 Spark plugs, electrode gap 0.
R poor handling characteristics R increased noise R increased fuel consumption Moreover, tires and rims not approved by Mercedes-Benz may, under load, exhibit dimensional variations and different tire deformation characteristics that could cause them to come into contact with the vehicle body or axle parts.
Same size tires Model ML 350 BlueTEC 4MATIC ML 350 4MATIC ML 350 4MATIC (Sport Package) ML 550 4MATIC 18" wheels Rims (light alloy) Wheel offset 8 J x 18 H2 2.
Model ML 550 4MATIC (Sport Package) 19"wheels AMG rims (light alloy) Wheel offset 8.5 J x 19 H2 2.28 in (58 mm) All-season tires 55 255/50 R19 107H XL (Extra Load) M+S Winter tires 55,56 255/50 R19 107H XL (Extra Load) M+S i Model ML 63 AMG 19" wheels AMG rims (light alloy) Wheel offset 9.
Spare wheel ! Compare the recommended tire inflation pressure for your vehicle with the tire inflation pressure on the yellow label located on the spare wheel rim.
Model Capacity Fuels, coolants, lubricants, etc. Engine with oil filter ML 350 BlueTEC 4MATIC 9.0 US qt (8.5 l) Approved engine oils ML 350 4MATIC ML 350 8.5 US qt (8.0 l) ML 550 4MATIC 9.5 US qt (9.0 l) ML 63 AMG 59 10.3 US qt (9.7 l) Automatic transmission All models, except ML 63 AMG 9.
Model Capacity Fuels, coolants, lubricants, etc. Brake system All models 0.63 US qt (0.6 l) MB Brake Fluid (DOT 4+) Cooling system ML 350 BlueTEC 4MATIC ML 350 4MATIC ML 350 approx. 10.0 US qt (9.5 l) MB 325.0 Anticorrosion/ Antifreeze ML 550 4MATIC approx.
Approved engine oils Engine oils are specifically tested for their suitability in our engines and durability for our service intervals. Therefore, only use approved engine oils and oil filters required for vehicles with the Maintenance System.
the formation of bubbles in the system, thus reducing the system’s efficiency. Therefore, the brake fluid must be replaced regularly. Refer to your vehicle’s Maintenance Booklet for replacement interval. Only brake fluid approved by Mercedes-Benz is recommended.
! Do not fill the tank with gasoline. Do not blend diesel fuel with gasoline or kerosene. The fuel system and engine will otherwise be damaged, which is not covered by the Mercedes-Benz Limited Warranty. For further information on diesel fuel pump labeling, contact an authorized Mercedes- Benz Center or visit www.
vapors may escape when opening the AdBlue ® tank. G Warning! When opening the filler cap of the AdBlue ® tank ammonia gas vapors may escape. Refill AdBlue ® in a well ventilated area only. Ammonia gas vapors have a pungent odor and are particularly irritating for your skin, mucous membranes, and eyes.
If you use a solution that is more than 55% anticorrosion/antifreeze (freeze protection to approximately -49‡ [-45†]), the engine temperature will increase due to the lower heat transfer capability of the solution. Therefore, do not use more than this amount of anticorrosion/antifreeze.
Washer system and headlamp cleaning system G Warning! Washer solvent/antifreeze is highly flammable. Do not spill washer solvent/ antifreeze on hot engine parts, because it may ignite and burn. You could be seriously burned. X Use MB Windshield Washer Concentrate “MB SummerFit”.
Service and Literature Your authorized Mercedes-Benz Center has trained technicians and Genuine Mercedes- Benz Parts to service your vehicle properly. For expert advice and quality service, contact an authorized Mercedes-Benz Center.
Order no. 6515 4317 13 Part no. 164 584 13 83 Edition B 2010 É1645841383}ËÍ 1645841383 164_AKB; 7; 31, en-US d2ureepe, Version: 2.11.8.1 2009-09-11T12:07:36+02:00 - Seite 366.
An important point after buying a device Mercedes-Benz 2010 ML63 AMG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Mercedes-Benz 2010 ML63 AMG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Mercedes-Benz 2010 ML63 AMG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Mercedes-Benz 2010 ML63 AMG you will learn all the available features of the product, as well as information on its operation. The information that you get Mercedes-Benz 2010 ML63 AMG will certainly help you make a decision on the purchase.
If you already are a holder of Mercedes-Benz 2010 ML63 AMG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Mercedes-Benz 2010 ML63 AMG.
However, one of the most important roles played by the user manual is to help in solving problems with Mercedes-Benz 2010 ML63 AMG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Mercedes-Benz 2010 ML63 AMG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
