Instruction/ maintenance manual of the product MX7300 Memorex
Go to page of 19
Befor e operating this pr oduct, please r ead these instructions completely . User’ s Guide Home Audio System with CD Player and AM/FM Stereo Radio MX7300.
1 Dear Customer, Please read this manual thoroughly before ope rat ing the unit to become more familiar with it and obtain the performance that will bring you continued enjoyment for many years.
2 Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1.
SPEAKER CONNECTION 1. Place the speakers in convenient locations on either side of the unit or connect them to the unit as described below. 2. Locate the Speaker Jacks on the sides of the unit and connect the right speaker to the Right Speaker jack and the left speaker to the Left Speaker jack.
4 PREP ARA TION FOR USE (CONTINUED) BA TTER Y OPERA TION FOR REMOTE The battery compartment is located on the bottom of the remote control. • Remove the battery compartment door by pushing the tab to the left (arrow 1) and then pulling the battery compartment down (arrow 2).
5 LOCA TION OF CONTROLS 2 4 6 5 8 9 10 11 7 1 3 12 13 15 14 16 17 18 19 20 21 1. AUX Jack 2. Headphones Jack 3. ON/ST ANDBY Button 4. Display 5. PLA Y/P AUSE ( ®p ) Button 6. T une/Skip/Search o Button 7. VOL. UP Button 8. VOL. DOWN Button 9. AUX Function Button 10.
6 LOCA TION OF CONTROLS (CONTINUED) 2 4 1 6 7 8 5 10 9 15 16 17 18 19 20 14 31 1 12 13 13 2 46 5 79 8 0 1. TUNER/BAND Function Button 2. AUX Function Button 3. Number Buttons 4. MEMORY Button 5. PLA Y/P AUSE ( ®p ) Button 6. DISPLA Y Button 7. INTRO Button 8.
7 OPERA TING INSTRUCTIONS With the power on, press the EQ button on the remote control to cycle through the preset EQ settings. Each press of the EQ button will cycle as follows: JAZZ, POP, CLASSIC, FLAT.
8 OPERA TING INSTRUCTIONS (CONTINUED) Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off. 1 MANUAL TUNING: Repeatedly press the Tune/Skip/Search n 1 or o 2 button to manually advance the frequency in the display up or down until the desired frequency appears.
9 OPERA TING INSTRUCTIONS (CONTINUED) Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off. 1 Press the MEMORY button 1 ; the preset number will blink in the display. Within three seconds, press the REPEAT/MEM Up button 2 or RANDOM/MEM Down button 3 until the desired memory number appears on the display.
10 Press the ON/STANDBY button to turn the unit on; the IR/Standby indicator will turn off. 1 The unit will start to play back automatically. If it does not start playing automatically, p ress the PLAY/PAUSE ( ®p ) button to begin playback on Track 1 .
11 While in the stop mode, press either the Tune/Skip/ Search n 1 or o 2 button to select a specific track for playback. 1 2 1 Press the PLAY/PAUSE ( ®p ) button.
12 To repeat all of the tracks on a disc continuously, first pre ss th e PLAY/PAUSE ( ®p ) button 1 to begin playback. Press the REPEAT/MEM Up button 2 once; “REPEAT” will light solid in the display and the CD will repeat all the tracks continuously.
13 Pre ss the Tune/Skip/Search n 1 or o 2 button to select the first track that you wish to program. When the desired track number appears in the display, press the MEMORY button 3 again. 0 2 3 1 4 Press either t he Tune/Skip/Search n 1 or o 2 but ton to select the next track you wish to program.
14 To play the tracks on the CD in a random order, while in the Stop mode, press the RANDOM/MEM Down button on the remote. “RAND” will appear in the display. 1 Press the PLAY/PAUSE ( ®p ) button. The unit will randomly play each track on the CD and then stop.
Caring for Compact Discs • Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc. • Do not attach adhesive tape, stickers, etc. to the co m pa ct disc label.
16 Symptom Possible Cause Solution Radio Noise or sound distorted Station not tuned properly for Retune the AM or FM broadcast on radio broadcasts. AM or FM. station. Unit is not positioned correctly. Rotate unit for best reception. F M S t e r e o i s s e l e c t e d .
REMOTE SECTION Power Source .....................................................................................................DC IN 12V Speakers .......................................................................................................
Memcorp, Inc. Weston, FL Printed in Hong Kong V isit our website at www .memorexelectronics.com.
An important point after buying a device Memorex MX7300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex MX7300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex MX7300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex MX7300 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex MX7300 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex MX7300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex MX7300.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex MX7300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex MX7300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
