Instruction/ maintenance manual of the product CH2 Memorex
Go to page of 17
For product questions or service, CALL 1-919-550-3259 or go to www .beastpowerequipment.com When you call the help-lin e y ou will need to have the following information: Date of Purchase: _______.
Copyright© 2009 by GXi Outdoor Powe r, LLC. All righ ts reserved. No part of this publication can be repro duced or di stributed without prior written permission of GXi Outdoor Powe r, LLC Clayton, NC 27520 USA.
Heavy Duty Power Equipment Contents Warnings ............................................................................ 1 Product Specif ications ........................................................ 2 Component Ident ification ..................
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 1 Heavy Duty Power Equipment W arnings This symbol indicates important safe ty instructions which, if not followed, could endanger personal safe ty and/or property. Read and follo w all instructions in this manual before attempting to opera te this machine.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 2 Heavy Duty Power Equipment Training 1. Read, understand, and follow all instru ctions o n the machine and in the manual) before attempting to assemble and operate. Keep this manual in a safe place for future and regular reference an d for ordering replacem ent pa rts.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 3 Heavy Duty Power Equipment Component Identification Recoil Starter The starter handle is located on the engine. Pull the starter handle to start engine. Chipper Funnel Use the chipper funnel to feed leaves only.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 4 Heavy Duty Power Equipment Missing Parts Request Form Name Phone Email Address IMPORT ANT : Please include y our r eceipt. Without a receipt, y our order will be delayed. Y ou may also email us at: customerservice@gxioutd oorpower .
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 5 Heavy Duty Power Equipment Safety Information Preparation 1. Thoroughly inspect the area where the chipper/ shredder is to be used.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 6 Heavy Duty Power Equipment 8. Never attempt to unclog either the feed i ntake o r discharge opening while th e engine is running.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 7 Heavy Duty Power Equipment Assembly Required tools: A Philips head screw driver Approximate assembly time: 10 minutes 1. Remove the chipper from its carton. Remove staples, break glu e on top flaps, or cut tape at carton end and peel along top flap to ope n carto n.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 8 Heavy Duty Power Equipment NOTE: The chipper/shredder operates most efficiently at the factory set engine speed of 3600 RPM. The speed is controlled by the governor, and the throttle setting should not be adjusted.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 9 Heavy Duty Power Equipment steps until engine fires. Rapid retraction of the recoil starter c ord can pull the starter cord back faster than you can let go. When starting the engine, pull the cord slowly until resistance is felt then pull rapidly to avoid kickbac k.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 10 Heavy Duty Power Equipment Maintenance and Storage Item Before each use 20 hrs or every 3 months 50 hrs or every 3 months 100 .
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 11 Heavy Duty Power Equipment Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine.
Rev: 07/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 12 Heavy Duty Power Equipment T roubleshooting Problem Cause Remedy Engine fails to start 1. Spark plug wire disconnect ed. 2. Fuel tank empty or stale fuel. 3. Throttle control lever not in correct starting position.
Rev: 04/2010 Brush Master™ Chipper/S hredder with 2-Way Feed 13 Heavy Duty Power Equipment Limited W arranty & Service Products Covered by this Warranty Length of Warranty : *(from the d.
Turf Beast Brush Master Brush Beast The Beast Check out our other great products at www .HomeDepot.com or visit our web site at www .beastpowerequipment.com Turf Beast 36 in. Walk Behind Mower Turf Beast 54 in. Walk Behind Mower The Beast 100 in. Tow Behind Mower Brush Beast 36 in Brush Mower.
An important point after buying a device Memorex CH2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Memorex CH2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Memorex CH2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Memorex CH2 you will learn all the available features of the product, as well as information on its operation. The information that you get Memorex CH2 will certainly help you make a decision on the purchase.
If you already are a holder of Memorex CH2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Memorex CH2.
However, one of the most important roles played by the user manual is to help in solving problems with Memorex CH2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Memorex CH2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
