Instruction/ maintenance manual of the product MECM1 Melitta
Go to page of 14
USE AND CARE GUIDE FOR MODELS MECM1 AND MECM1CAN READ AND SA VE THESE INSTRUCTIONS W ARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death.
2 IMPORT ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Read all instructions before using appliance. • Do not touch hot surfaces.
3 SA VE THESE INSTRUCTIONS THIS APPLIANCE IS FOR HOUSEHOLD USE ONL Y CAUTION: A short power supply cord is provided to reduce the risk of personal injury resulting from becoming entangled in or tripping over a longer cord. Extension cords are available from local hardware stores and may be used if care is exercised in their use.
4 FIGURE 1 N M L K J A B C D E F G H I FIGURE 2 A B D E F C Features Figure 1 A W ater tank lid B On/off switch with LED light C W ater tank with cup markings D Steam selector (“OFF” position) E S.
5 FIGURE 3 FIGURE 4 FIGURE 6 FIGURE 7 FIGURE 8 FIGURE 9 FIGURE 10 FIGURE 12 FIGURE 1 1 FIGURE 5 A B C D.
6 Congratulations on the purchase of your new Melitta ® Choco Latte Hot Beverage machine. Y ou have purchased an innovative and reliable appliance which we hope will give you years of enjoyment. As with every technical appliance, there are some fundamental aspects of this machine which should be observed.
7 3. Fill with ground coffee (Figure 6). The amount of ground coffee to be used is a matter of taste. One measuring spoonful (approx. 6-7g/2 TBS) is recommended per cup for medium strength coffee. Swing back the filter until it clicks into position. Ensure that the filter liner is properly seated (Figure 7).
8 Assemble the frothed milk spout as follows (Figure 10): 1. Insert the froth regulator (Figure 2/A) into the suction piece (Figure 2/B) and press it on firmly until froth regulator sits directly on top of suction piece. 2. Push the suction piece into the connector (Figure 2/C) and place the milk discharge outlet (Figure 2/D) onto the connector .
9 10. After making the frothed milk, turn the steam selector to the off position. 1 1. Y ou can froth as much milk as often as you like provided that there is enough excess water in the water tank.
10 Descaling your machine Fill the water tank with water and then add the descaling agent in that order . Swing the swing-out filter back into the appliance.
11 - Press the froth regulator firmly onto the suction piece and check the position of it (horizontal position for maximum amount of froth). - T oo little or no milk in the pitcher . - The flexible hose in the milk carton does not reach far enough into the milk.
12 IMPORT ANT NOTICE If any parts are missing or defective, DO NOT return this product. Please call our Customer Service Department for assistance. 800-233-9054 Monday - Friday 9:00 am - 5:00 pm CST T.
13 LIMITED ONE YEAR W ARRANTY W arranty: This Melitta product is warranted by Salton, Inc. to be free from defects in materials or workmanship for a period of (1) year from the original purchase date. This product warranty covers only the original consumer purchaser of the product.
14 Risk During Shipment: W e cannot assume responsibility for loss or damage during incoming shipment. For your protection, carefully package the product for shipment and insure it with the carrier .
An important point after buying a device Melitta MECM1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Melitta MECM1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Melitta MECM1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Melitta MECM1 you will learn all the available features of the product, as well as information on its operation. The information that you get Melitta MECM1 will certainly help you make a decision on the purchase.
If you already are a holder of Melitta MECM1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Melitta MECM1.
However, one of the most important roles played by the user manual is to help in solving problems with Melitta MECM1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Melitta MECM1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
