Instruction/ maintenance manual of the product Rollux 2 Medium
Go to page of 10
R ollux 2 Montage-/ Bedienungsanleitung Mounting/ Operating instructions Instructions de montage/ Mode d´emploi Instrucciones de montaje/ manejo W ichtig Attention Impor tant Atención Gefährlich f.
1. 2. 2.1 2.2 2.3 3. 3.1 3.2 3.3 3.4 Allgemeine Sicherheitshinweise Montage Befestigungshinweise T eileliste Montage Bedienung Allgemeine Hinweise Bedienungsanleitung Bedienung bei W andmontage Bedienung bei Deckenmontage 1 2 2 2 2 4 4 4 4 5 Inhaltsverzeichnis D 2 2.
3 (7) (2) Neigewinkel (2) mit zwei Blechschrauben (7) sichern. W and- und Deckenhalterung (3) in gewünschter Position an die W and oder an die Decke halten, mit Hilfe einer W asserwaage regulieren und die Bohrlöcher markieren. Löcher (für die W and- und Deckenhalterung) der Markierung entsprechend bohren und Dübel einsetzen.
4 (1) (4) (6) (5) (5) (6) (4) (2) (8) (8) (6) (5) (4) (3) (6) (5) (4) (2) W andmontage: Mit Hilfe von Schrauben (4), Scheiben (5) und T ellerscheiben (6) W and- und Deckenhalter (3) mit Neigewinkel (2) sichern. Zwei Blechschrauben (8) als zusätzliche Sicherung anbringen, da die Bildwand (1) bei W andmontage nicht zum Neigen ausgelegt ist.
5 Ausfahren der Bildwandfläche: Ziehen Sie die Bildwandfläche am Griff (a) nach unten, bis die Gelenke spürbar einrasten. Neigen der Bildwandfläche: Neigung der Bildwandfläche nur in komplett ausgefahrener Position! Drücken Sie die Bildwandfläche am Griff (a) über den Widerstandspunkt nach hinten, bis die Bildwandfläche sich neigt.
Parts list 2.2 (1) 1x (2) 1x (3) 1x (4) 2x (5) 2x (6) 4x (7) 2x (8) 2x 6 (1) (2) 2.3 Installation Slide the tilt bracket (2) with the tabs into the tube holder of the screen case (1).
7 Hold the wall and ceiling bracket (3) in the desired position on the wall a) or on the ceiling b) ; use a spirit level to ensure optimum alignment and then use a pencil to mark the respective boreholes as shown. Drill holes according to the corresponding marking, then insert wall plugs.
8 3. 3.1 Operation General instructions Operating instructions Operating the screen when wall-mounted If wall-mounted, it is not possible to tilt the screen surface ! 3.
Tilting the screen surface: Only tilt the screen surface when it is fully drawn out and the scissor joints have engaged ! Use the handle (a) to press the screen surface backwards past the resistance point until the screen surface is tilted. Y ou can freely adjust the angle of tilt via the screws (4) (see Section 2.
10 1. 2. 2.1 2.2 2.3 3. 3.1 3.2 3.3 3.4 Consignes générales de Sécurité Montage Consignes de fixation Liste des pi è ces Montage Utilisation Consignes générales Instructions de service Maniement lors de montage mural Maniement lors de montage plafond 1 10 10 10 10 12 12 12 12 13 Sommaire F 2.
An important point after buying a device Medium Rollux 2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Medium Rollux 2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Medium Rollux 2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Medium Rollux 2 you will learn all the available features of the product, as well as information on its operation. The information that you get Medium Rollux 2 will certainly help you make a decision on the purchase.
If you already are a holder of Medium Rollux 2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Medium Rollux 2.
However, one of the most important roles played by the user manual is to help in solving problems with Medium Rollux 2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Medium Rollux 2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
