Instruction/ maintenance manual of the product MONARO 7652K1 Meco
Go to page of 16
Monaro ® Charcoal Grill by Mec o ® For Customer Service, call 1-800-251-7558 or visit our web site at www .meco.net FOR OUTDOOR HOUSEHOLD USE ONL Y . NOT FOR COMMERCIAL USE. • Failure to follow these instructions could result in fire or explosion which could cause property damage, personal injury or death.
2 © Meco Corporation® 2005 — NOTICE — MECO CORPORA TION STRIVES T O BE A QUALITY SUPPLIER OF CONSUMER PRODUCTS. IF WE OMITTED ANY P ARTS NEEDED FOR ASSEMBL Y , OR YOU NEED TROUBLESHOOTING INFORMA TION, PLEASE CONT ACT US USING OUR T OLL FREE NUMBER.
3 P ARTS ILLUSTRA TIONS 1 7 with Item 10 inst alled 9 6 or 6A 5 4 3 2 or 2A 10-See Item 7 23 22 20 21 19 17 16 15 14 13 12 11 2B 3A 4A 5A 11 A 17A 18 or 18A 6B 8.
PA RTS LIST ITEM DESCRIPTION PA RT # 1 Owner's Manual 03.6077.01 1 1 1 2 Side Table (Metal Insert ) 03.6495.00 -- 2 2 2A Side Table (Metal Insert ) 03.6597.00 -- -- 2 2B Side Table (All W ood) 03.5845.00 2 -- -- 3 Fixed Leg (Metal) 03.6496.00 -- 2 2 3A Fixed Leg (W ood) 03.
· Lay Side T ables up side down on a flat surface. Side tables will fit on either side of grill. · Attach the two Fixed Legs to one Side T able. Align four recessed holes of a Fixed Leg with four inserted holes in a Side T able. The four large recessed holes in the Fixed Leg should face away from Side T able.
STEP 2- Bottom Shelf/Leg Assembly (ITEM 5) 1/4-20 x 1 3/8” Bolt (ITEM 6 or 6A) Bottom Shelf 6 · Place both Leg/Side T able Assemblies opposite each other as shown with Bottom Shelf between them. · Align Bottom Shelf holes with holes of Wheel Legs and attach with four 1/4-20 Bolt s (Item 5 or 5A).
STEP 3-Wheel Assembly (ITEM 9) Wheel (ITEM 8) W asher (Axle) (ITEM 10) Axle Nut 7 · Remove Axle Nuts from Axle. Insert Axle through both sides of Wheel Legs. Place Axle W ashers onto each end of Axle. · Position Wheel hub recess to the out side and slide a Wheel onto each end of Axle.
STEP 4-Slide V ent Assembly (ITEM 13) Bolt, 6mm (ITEM 15) Sleeve Sp acer , 6mm (ITEM 16) Locknut, 6mm 8 · Open the Hood on the Grill Body . · Align slotted holes in Slide V ent with holes in Grill Body Side. · Insert a 6 mm x 16 Bolt through the 6mm Steel W asher and Sleeve Sp acer .
STEP 5-Hood Handle Assembly (ITEM 17) Bolt, 6mm x 90 mm (ITEM 18 or 18A) Hood Handle (ITEM 19) Handle Sp acer (ITEM 16) Locknut 6mm STEP 6-Grill Body/Cart Assembly (Continues on next page) (ITEM 17) Bolt, 6mm x 90 mm (ITEM 20) Body Sp acer (ITEM 21) Wingnut, 6mm 9 · Open Hood and lay it on on it s backside.
STEP 6-Continued Grill Body/Cart Assembly (See also page 1 1 for W ood Cart Assembly) · Carefully lay Grill Body Assembly on its back side with Front p anel facing up and Hood open. Lay Cart Assembly on the back side with the Grill Body between Side T ables.
FIG . A FIG . B View from inside Body/Leg Assembly Bolt Body Sp acer Wingnut View from back side of Body/Leg Assembly af ter standing up STEP 6-Grill Body/W ood Cart Assembly 11.
STEP 7- Inst all Drip Pan, Charcoal Grate & Cooking Grid (ITEM 23) Charcoal Grate (ITEM 24) Cooking Grid 12 · Slide Drip Pan back into Grill Body . Make sure the Drip Pan is pushed all the way in. · Hang Charcoal Grate inside Grill Body by hooking the handles inside the two (2) elongated slot s on each side of the Grill Body .
T o reduce the risk of serious bodily injury or death: · Locate your charcoal in an open area away from buildings, dry leaves, or brush.and at least 10 feet away from your house or building. · Always make sure the grill is on a level, stable surface and not tilted toward the front or back.
14 ST ARTING A FIRE FOR GRILLING STEP 1. Open the Hood and the Slide V ents. STEP 2. Remove the Cooking grids. Make sure the Drip Pan is pushed all the way in. STEP 3. Place about five pounds of charcoal (72- 75 briquettes) on the Charcoal Grate. Make a pyramid shaped stack near the front of the Charcoal Grate.
15 CARE AND MAINTENANCE 1) Charcoal Grate- Remove and shake expended ashes into a safe receptacle or area. If any unburned charcoal, just leave it until next time. (Optional) Scrape any residue from the grate. W ash with warm soapy water if you wish, or just spray with garden hose.
P/N 03.6077.01 REV . C 12/06 16 Aussie ® ®.
An important point after buying a device Meco MONARO 7652K1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Meco MONARO 7652K1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Meco MONARO 7652K1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Meco MONARO 7652K1 you will learn all the available features of the product, as well as information on its operation. The information that you get Meco MONARO 7652K1 will certainly help you make a decision on the purchase.
If you already are a holder of Meco MONARO 7652K1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Meco MONARO 7652K1.
However, one of the most important roles played by the user manual is to help in solving problems with Meco MONARO 7652K1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Meco MONARO 7652K1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
