Instruction/ maintenance manual of the product MC206 McIntosh
Go to page of 16
McIntosh Laboratory , Inc. 2 Chambers S treet Binghamton, New Y ork 13903-2699 Phone: 607-723-3512 F A X: 6 07 -7 24- 05 49 Owner s Manual MC206 MC206 Six Channel Power Amplifier.
2 IMPOR T ANT SAFETY INSTRUCTIONS! PLEASE READ THEM BEFORE OPERA TING THIS EQUIPMENT . W ARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
3 A polarized plug has two blades with one wider than the other . A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety . If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
4 Performance Features Introduction and Performance Features Introduction · Power Output The MC206 consists of six Power Amplifier Channels, each capable of 200 watts into 4 ohm or 120 watts into 8 ohm loudspeakers with less than 0.
5 Dimensions The following dimensions can assist in determining the best location for your MC206. There is additional informa- tion on the next page pertaining to installing the MC206 into cabinets.
6 Inst allation The MC206 can be placed upright on a table or shelf, standing on its four feet. It also can be custom installed in a piece of furniture or cabinet of your choice. The four feet may be removed from the bottom of the MC206 when it is custom installed as outlined below .
7 Rear Panel Connections and Switch Connect the MC206 power cord to a live AC outlet. Refer to informa- tion on the back panel to determine the correct voltage MUL TI-CHANNEL INPUT accepts a 25 conduc.
8 Caution: The supplied AC Power Cord should not be connected to the Rear Panel of the MC206 Amplifier until after the Loudspeaker Connections have been made and the supplied protective T erminal Connection Covers have been installed. Failure to observe this could result in Electric Shock.
9 To A C Outlet How to Connect the MC206 for Six Channels Right Front Loudspeaker Left Front Loudspeaker Center Front Loudspeaker Right Surround Loudspeaker Left Surround Loudspeaker Back Surround Lou.
10 Front Panel Displays and Controls Remote On Indicator lights when the amplifier is in the Remote T urn-On Mode POWER GUARD LEDs light when the LEFT FRONT , o r LEF T SURRound Amplifier Channel POWE.
11 How to Operate and Read the Power Output Meters How to Operate Power On T o have the MC206 turn On or Of f when a A /V Control Center turns On or Off, rotate the POWER Switch to the REMOTE Position. For manual operation, rotate the POWER Switch to the ON or OFF Position as de- sired.
12 CAUTION: When the MC206 amplifier is used in specific Countries (Austria, Belgium, Germany , Denmark, Spain, Finland, France, United Kingdom, Gr eece, Ir eland, Italy, Luxembourg, The Netherlands, Portugal, Sweden), only loudspeakers of 8 ohms impedance or higher should be connected.
13 Notes.
14 Specifications Specifications Power Output Minimum sine wave continuous average power output per channel, all channels operating is: 200 watts into a 4 ohm load 120 watts into a 8 ohm load Rated Po.
15 Packing Instructions Packing Instructions In the event it is necessary to repack the equipment for shipment, the equipment must be packed exactly as shown below . It is very important that the three plastic feet are at- tached to the bottom of the equipment.
McIntosh Part No. 040752 McIntosh Laboratory , Inc. 2 Chambers Street Binghamton, NY 13903.
An important point after buying a device McIntosh MC206 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought McIntosh MC206 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data McIntosh MC206 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, McIntosh MC206 you will learn all the available features of the product, as well as information on its operation. The information that you get McIntosh MC206 will certainly help you make a decision on the purchase.
If you already are a holder of McIntosh MC206, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime McIntosh MC206.
However, one of the most important roles played by the user manual is to help in solving problems with McIntosh MC206. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device McIntosh MC206 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
