Instruction/ maintenance manual of the product 3183636 Maytag
Go to page of 7
IMPORTANT: Read and save these instructions. IMPORTANT: Installer: Leave Installation Instructions with the homeowner. Homeowner: Keep Installation Instructions for future reference. Save Installation Instructions for local electrical inspector’s use.
24” Double oven Cablnet door Before you start... Read the electrical and carpentry instructions. Proper installation is your responsibility. A qualified technician should install this oven. Make sure you have everything necessary for correct installation.
24” Single oven Do Not seal oven to cabinets. 24” min. overall cabinet depth 24” min. overall cabinet wldth ’ II 211/T’ mln. 31-l/4” mlrY. recommended so oven door, when open, Is 38’ from floor. 27-5/5”- recessed height h, 23-515” - recessed depth II Cabinet door ‘Note: There must be 1” mln.
Electrical requirements Electrical Shock Hazard l Electrical ground is required on this appliance. *Do Not ground to a gas pipe. *Do Not have a fuse in the neutral or grounding circuit. A fuse in the neutral or grounding circuit could result in an electrical shock.
Now start... with oven in kitchen. 1 n Remove shipping materials, tape, and protective film from oven. Do Not remove shipping base at this time. 2 n Remove the racks and other parts from inside the oven. Personal Injury Hazard l Use both hands to remove oven doors l Grasp only the sides of oven doors.
Replace the oven racks. Replace the single oven or upper double oven door by partially fitting the door hinges into the hinge slots. Pull door slightly toward you; then slide door completely in place. Reinstall the two oven-door screws (if required for your oven door).
If the oven does not operate... l Check that the circuit breaker is not tripped or the house fuse blown. l See Use and Care Guide for troubleshooting checklist. NOTE: Refer to Use and Care Guide for operating instructions and cleaning instructions. Part No.
An important point after buying a device Maytag 3183636 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maytag 3183636 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maytag 3183636 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maytag 3183636 you will learn all the available features of the product, as well as information on its operation. The information that you get Maytag 3183636 will certainly help you make a decision on the purchase.
If you already are a holder of Maytag 3183636, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maytag 3183636.
However, one of the most important roles played by the user manual is to help in solving problems with Maytag 3183636. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maytag 3183636 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
