Instruction/ maintenance manual of the product P1-600.4 Maxxsonics
Go to page of 13
P1-600.2 / P1-1000.2 P1-600.4 / P1-1000.4 P1-2000.1 / P1-5000.5.
INDEX P AGE General Installation Procedure..........................................................................................................................................................................................1 Amplifier Feature Descriptions.
GENERAL INST ALLA TION PROCEDURE 1 System Design The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS POWER ONE AMPLIFIERS: ! ! ! ! ! ! ! Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation except the mono amps All Crunch amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “ PROTECT” LED.
3 P1-600.2 / P1-1000.2 2 CHANNEL AMPLIFIER APPLICA TIONS 4. MODE: This is the most basic application for the P1 Series 2 channel amplifiers. Should be in the STEREO position. 5. Line Level: 1. Interconnect cable checklist: Connect the LINE INPUTS to the Radio/CD with good quality RCA cables.
P1-600.4 / P1-1000.4 4-CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL SYSTEM - HI P ASS: N/A Here we show how to use the 4 channel amplifiers as straight forward discrete 4 - LOW P ASS: N/A channel full range units. The MODE switch should be in 4CH.
P1-600.4 / P1-1000.4 4-CHANNEL AMPLIFIER APPLICA TIONS Front/Rear high pass, using a 2 channel amplifier for mono sub bass Channels 1/2: The combination of a 2 and a 4 channel amplifier , utilizing their built in - HI P ASS: 100 Hz crossovers, makes it a snap to put together a full system with front and rear highs, with mono sub bass.
POWER INPUT GND REM BA TT+12V SPEAKER OUTPUT + + - - FUSE 6 Basic application Crossover frequency control checklist: These sub bass amplifiers can be used in any of the bi-amplification systems described in LOW PASS: 40Hz to 150Hz this manual, replacing the 2 channel amplifiers as per the illustrations.
7 Basic application P1-5000.5 5-CHANNEL AMPLIFIER APPLICA TION Channels 3/4: Here we show how to use the channel amplifier as straightforward discrete 5 - HI P ASS: N/A channel full range units. - LOW P ASS: N/A Interconnect cable checklist: - Connect the four inputs of the amplifier to a Radio/CD with quality RCA cables.
8.
9 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE P1-2000.1 General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction.
TROUBLESHOOTING A SYSTEM 10 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault. Description of the PROTECT system built into all Crunch amplifiers The diagnostic system will shut down the amplifier , until reset by turning the head unit off, and back on.
1 1 As the manufacturer of Maxxsonics, MB Quart, Autotek, Crunch and Hifonics car audio products, Maxxsonics USA Inc. W arrants to the origina l consumer purchaser the amplifier to be free from defects in material and workmanship for one (1) Y ear from date of purchase.
An important point after buying a device Maxxsonics P1-600.4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxxsonics P1-600.4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxxsonics P1-600.4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxxsonics P1-600.4 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxxsonics P1-600.4 will certainly help you make a decision on the purchase.
If you already are a holder of Maxxsonics P1-600.4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxxsonics P1-600.4.
However, one of the most important roles played by the user manual is to help in solving problems with Maxxsonics P1-600.4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxxsonics P1-600.4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
