Instruction/ maintenance manual of the product GPV800.2 Maxxsonics
Go to page of 15
AMPLIFIERS DRIVE GPV800.2 / GPV1100.2 / GPV3500.2 GPV1200.4 / GPV1800.4 / GPV2400.4 GPV2100.1.
Ground Pounder GPV AMPLIFIERS INDEX P AGE Crunch is proud to introduce the finest high end car audio products available and would like to thank you for your continued support. The Ground Pounder Series range of products have been designed to a very high level of performance, with features unavailable in any other products.
GENERAL INST ALLA TION PROCEDURE 1 System Design Installation The success of any car stereo system relies on several factors, such as the system design, execution of the installation, and system setup. Please remember that any system is only as good as its weakest link.
AMPLIFIER FEA TURE DESCRIPTIONS GROUND POUNDER GPV AMPLIFIERS: Each model is capable of 4 & 2-Ohms stereo per channel, or 4-Ohms mono bridged operation except All Crunch amplifiers feature a comprehensive diagnostic system, with speaker lead short circuit, and amplifier DC faults indicated by the red “ PROTECT” LED.
GROUND POUNDER DRIVE GROUND POUNDER DRIVE GPV800.2 / GPV1 100.2 / GPV3500.2 2 CHANNEL AMPLIFIER APPLICA TIONS 3 FULL RANGE MONO This is the most basic application for the GROUND POUNDER Series 2 channel 3. Crossover frequency control checklist: amplifiers.
GROUND POUNDER DRIVE GROUND POUNDER DRIVE + - gnd - + HI INPUT 5V 0.2V 0dB 12dB 60Hz 1.2KHz 30Hz 250Hz LEVEL BASS EQ HPF LPF FULL LPF HPF MONO STEREO X-OVER MODE LINE OUT LINE INPUT L L R R POWER INPUT SPEAKER OUTPUT BRIDGED - LEFT + - LEFT + FUSE GND REM +12V + - gnd - + HI INPUT 5V 0.
GPV1200.4 / GPV1800.4 / GPV2400.4 4 CHANNEL AMPLIFIER APPLICA TIONS 4 CHANNEL FULL RANGE SYSTEM 2 or 3 CHANNEL FULL RANGE SYSTEM Crossover frequency control checklist: Here we show how to use the 4 channel amplifiers as straight forward discrete 4 channel Channels 1/2: full range units.
6 Basic application Crossover frequency control checklist: These sub bass amplifiers can be used in any of the bi-amplification systems described in LOW P ASS: 40Hz to 150Hz this manual, replacing the 2 channel amplifiers as per the illustrations.
7.
8 SETTING UP SYSTEMS AFTER INST ALLA TION FOR BEST PERFORMANCE GPV2100.1 General: At this point you are ready to get more specific on the settings for your amplifier . Subsonic: This setting acts as a low frequency cut off for your system bass reproduction.
TROUBLESHOOTING A SYSTEM 9 The key to finding the problem in a misbehaving sound system is to isolate parts of that system in a logical fashion to track down the fault.
10 Maxxsonics Limited W ar r anty As the manufacturer of Maxxsonics, Autotek, Crunch, MB Quar t and Hifonics car audio products, Maxxsonics USA Inc. Warr ants to the original consumer purchaser the amplifier to be free fr om defects in ma terial and workmanship for one (1) Y ear fr om date of purchase.
1 1 OEM Integration Accessories MX-1 Premium High T o Low Level Converter Low Level Outputs * High Level Inputs: Accepts all types of High level Inputs including floating ground and high voltages up to 30 volts. * Audio Signal Sense / Hardwire T urn-On: Audio sense detects music signals from the OEM wires and activates the MX-1.
12 Accessories LEVEL BYP ASS NORMAL RED - CLIP GREEN - 9V -20dB 0dB -6dB INPUT LEVEL PHASE BOOST P ARAMETRIC BASS EQ BANDWIDTH FREQUENCY 0.2V 180 +10 dB 100Hz 9V 0 0dB 30Hz MA XX-LINK MLX-100 SUBSONIC.
P ART#: S61 1.
An important point after buying a device Maxxsonics GPV800.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxxsonics GPV800.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxxsonics GPV800.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxxsonics GPV800.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxxsonics GPV800.2 will certainly help you make a decision on the purchase.
If you already are a holder of Maxxsonics GPV800.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxxsonics GPV800.2.
However, one of the most important roles played by the user manual is to help in solving problems with Maxxsonics GPV800.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxxsonics GPV800.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
