Instruction/ maintenance manual of the product HVR-04E Maxtor
Go to page of 57
HVR-04E Inst allation Guide v 1.0.
FCC Compliance Statement Caution : Any changes or modificat ions in constructi on of this devic e which are not expre ssly approved the part y responsible for complianc e could void the user 's authority t o operate the equipment.
Important Notice 1. Do not place heavy objects on the top of the HV R-04E. 2. HVR-04E is for indoor use. It is not weatherproof. Use HVR-04E w ith referring to its envir onmental specifications (T em perature & Humidity). T o clean the HVR-04E, gen tly wipe the outside with a clean dry cloth.
HVR-04E T ABLE OF CONTENTS 4 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. OVER VIEW ................. ...................... ....................... ....................... .................. ................ ......... 7 1. What is H VR-04E?.........
T ABLE OF CONTENTS HVR-04E 8.2.2. Dayligh t Saving ................. .................. ....................... ....................... .................. 23 8.2.3. T ime Forma t ................................... ................... ................
HVR-04E T ABLE OF CONTENTS 6 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 14.3. Available HDD .................. ....................... .................. ....................... ....................... 37 14.4. Registering & Forma tting HDD ...
OVER VIEW HVR-04E OVER VIEW 1. What is HVR-04E? The HVR-04E is a 4-Analo g, 12-IP channel network d igital video recorder . The HVR-04E can record and display 4 analog vi deo channels and 12 IP video channels simultaneous ly . V ideo, Audio, and T ext Event- Logs are digitiz ed and stored on tw o internal hard-drives.
HVR-04E OVER VIEW 8 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 2. Supplied Accessories Unpack and ch eck all the item s as below . 1. HVR-04E ( 1) 2. DC Power Supply (1) (1 10V~220V) 3. AC Power Co rd (1) 4. CD-ROM ( Including DVR Ma nager) (1) 5. Remote Controller (1) 6.
OVER VIEW HVR-04E 3. Description & Function HVR-04E Front (1) LED (2) IEEE1394 con necter (3) Remote contr oller receive r (4) USB conne cter (5) Functi on buttons (6) Bracket fixing ho le for rac.
HVR-04E OVER VIEW 10 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. HVR-0 4E Rear (7) Power switch (8) Ethernet co nnector (9) BNC conne ctor for V ideo input (10) Audio inpu t / out put conne ctor (1 .
INST ALLA TION AND CONNECTION HVR-04E INST ALLA TION AN D CONNECTION 4. Connecting & Running HVR-04E 4.1. Conn ectin g came ra (1) Connect CCTV camera to HVR-04E with BNC cable as shown below . (2) Set video type ( NTSC/P AL) by rear panel’ s switch.
HVR-04E INST ALLA TION AND CONNECTION 12 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 4.2. Connecting Monitor (1) Connect CCTV monitor to HVR-04E with BN C cable as shown below . <Note> HVR-04E has two video ou tput ports ; for Mon itor and VCR.
INST ALLA TION AND CONNECTION HVR-04E.
HVR-04E INST ALLA TION AND CONNECTION 14 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 4.4. Supplying Powe r (1) Connect power ca ble to HVR-04E. (2) T urn on the power switch located on th e HVR-04E rear pa nel. <Note> Use the plug bra cket to secure the power cable if needed.
INST ALLA TION AND CONNECTION HVR-04E 5. Running OSD menu 5.1. Usin g menu Press the [MENU ] button to open the OSD Configurat ion Menu. (1) Main Menu T abs : The selected tab is show n in blue and the rela ted sub-menus wi ll be shown bel ow the tab.
HVR-04E INST ALLA TION AND CONNECTION 16 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 5.2. Dialogue Box to Edit a Word There are two metho ds to set word. (1) Using number button Enter the related numbers in order of horiz ontal/vertica l. (For exam ple, in order to sele ct “ C ” , pr ess [3] and [2] buttons.
INST ALLA TION AND CONNECTION HVR-04E 6. Setting remote controller 6.1. Setting remote control DIP switch Set t he rem ote c ontr ol DI P switc h to “ ON. ” 6.2. Set ID o f HVR-0 4E When control ling several H VR-04Es with one remote cont roller , set Remote Control ID as follows.
HVR-04E INST ALLA TION AND CONNECTION 18 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. (3) Select “Misce llaneous” from the sub-menu li st using the [ ▼ ] button and press the [ENETR] button. (4) Select “Remote Control ID,” and press the [ENETR] button.
INST ALLA TION AND CONNECTION HVR-04E 6.4. Operable range of remote controller 6.5. Loading the batteries into remote controller Remote controlle r requires two AAA-typ e batteries. 1. Remove the battery cover . 2. T aking care that the poles(+/-) are correctly pos itioned 3.
HVR-04E INST ALLA TION AND CONNECTION 20 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 7. HVR-04E Configuration 7.1. Basi c Confi gura tion 7.2. Advanced Configuration.
INST ALLA TION AND CONNECTION HVR-04E 7.3. Exte rnal S tor age & B acku p Con figu rati on 7.4. Internet/Intranet Configuration.
HVR-04E INST ALLA TION AND CONNECTION 22 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 8. HVR-04E Basic Setting 8.1. Vie wing Imag e After initial start-up, image s from Ch.1~4 ar e displayed in a quad-split scre en. <Note> If user password is se t, a prompt fo r entering the password will appear .
INST ALLA TION AND CONNECTION HVR-04E 8.2. Setting Date & Time (1) Press [MEN U] button, an d select “Quick Setup” tab. (2) Select “Date/T ime” and enter the S ettings Page by pressing [ENTER]. 8.2.1. Time Zone (1) Select “T ime Zone” and press [ENETR] button to con figure.
HVR-04E INST ALLA TION AND CONNECTION 24 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 8.2.3. Time Format (1) Select “T ime Format” using the [ ◄◄ / ►► ] or t he [ ▲ / ▼ ] buttons and press [ENT ER]. (2) T wo T ime Fo rmats are avail able; ‘MM/DD/YYYY’ and ‘YYYY/MM/ DD’.
INST ALLA TION AND CONNECTION HVR-04E 8.3. Setting Recording Condition Recording c onditions un der the “Quick Setup” menu ta b apply the sam e values to all a nalog channe ls 1~4. All settings are applied for 24 hours/da y regardless of the values set for “T ime Schedule” or “Alarm Rec.
HVR-04E INST ALLA TION AND CONNECTION 26 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. (1) Press [MEN U] button, an d select “Quick Setup.” (2) Move to sub-menu by pressing [ENTE R] or the [ ▼ ] button. (3) Select “Recordin g” using the [ ▲ / ▼ ] buttons and press the [ENTER] button.
INST ALLA TION AND CONNECTION HVR-04E 8.3.5. Quality When “Record ing Speed/Quali ty” is set as “Custom,” values can be set ma nually . (1) Select “Quality” us ing [ ▲ / ▼ ] buttons an d press the [ENTER] button. (2) Select a value using the [ ◄◄ / ►► ] button.
HVR-04E INST ALLA TION AND CONNECTION 28 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 9. Connecting and Configuring Sensor 9.1. Connecting Sensor Input T o connect a sensor to S1, fix the wire to “S1” and “G“. <Note> Devices connec ted to the sensor i nput should have “ Dry contact.
INST ALLA TION AND CONNECTION HVR-04E 9.2. Setting Sensor at OSD menu After a sensor is connected, it can be activate d through the OSD Config uration menu. Select the sensor number (S1, S2, etc.) a nd press the [Enter] button to configure . Use the [ ◄◄ / ►► ] buttons to select “ On” or “O ff.
HVR-04E INST ALLA TION AND CONNECTION 30 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 10. Connecting & Conf iguring Relay Out 10.1. Connecting Relay Out HVR-04E has total four ports of Relay Out. T o connect a device to “O1,” connec t the wires to two “O1”s.
INST ALLA TION AND CONNECTION HVR-04E 10.2. Configuring Relay Out Each relay can be synchroniz ed with a sensor input or with motion detectio n for each of t he four time schedules (W eekday (Day), W eekday (Night), W eekend (Day), W eekend (N ight)).
HVR-04E INST ALLA TION AND CONNECTION 32 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 11. Connecting Ex ternal Device with Serial Port 11.1. Connecting Text Input Device (ATM / POS / Access Control) In additio n to imag es, the HVR-04E can reco rd text d ata received from POS/A TM t hrough t he RS232 serial port.
INST ALLA TION AND CONNECTION HVR-04E 12. Connecting & Configuring Serial Port s for Pan/Tilt/Zoom 12.1. Connecting Serial Port The HVR-04E has most major PTZ protoco ls already pre-progra mmed. Makes and models not supporte d can still be controlled us ing the T ranspar ent Protocol.
HVR-04E INST ALLA TION AND CONNECTION 34 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 12.2. Configuring Serial Port Configure P TZ serial ports and ava ilable m odes at “System / Serial Setup”. After complet ing serial setu p, configure base address and p ort for each channe l under the “ Camera” menu tab.
INST ALLA TION AND CONNECTION HVR-04E <Note> W ire Handling Trimming Wire When connec ting a wire to a terminal block, fo llow the instruc tions below . Note the differ ent types of wire that can be used. S tranded Wire : Peel of f the wiring cover 8~10mm and solder it.
HVR-04E INST ALLA TION AND CONNECTION 36 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. If properly connecte d, the disk is recogn ized automatica lly as in the follow ing picture. T o copy images, the process is as fol lows: Set copy range (up to 1 minute ) Æ Select drive Æ Copy (press “Star t”).
INST ALLA TION AND CONNECTION HVR-04E 14. Connecting External Storage 14.1. IEEE1394 Bay HVR-04E has three IEEE1394 ports for exter nal stor age device interface. W ith them, HVR-04E can expand storage capacity up to 4TB. <Note> Some IEEE1394 Bay may not be r ecognized by the HVR-04E .
HVR-04E INST ALLA TION AND CONNECTION 38 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 14.4. Registering & Formatting HDD “Disk Manager” will auto ma tically run on start- up after installing a HDD. If “Disk Man ager” does not automatical ly run on st art-up, make sure t he HDD is prop erly inst alled.
INST ALLA TION AND CONNECTION HVR-04E (8) Select “Apply” us ing [ ▲ / ▼ ] button and pres s [EXIT] button . The HDD status i s changed to “[R]” after formatting.
HVR-04E INST ALLA TION AND CONNECTION 40 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 15.2. Configuring HVR-04E’s Network Information The follo wing description is on based on Etherne t connection . For more detai led informat ion on the Network Se ttings Page, plea se refer to “ HVR-04E OSD User ’ s Guide”.
INST ALLA TION AND CONNECTION HVR-04E 16. Using DV R Ma nager 16.1. PC System Requirements for running DVR Manager Minimal Requirements Recommended Requirements CPU P- Ⅲ 600M Hz or above P- Ⅲ 1GHz.
HVR-04E INST ALLA TION AND CONNECTION 42 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. (4) Select which com ponents to install and press the “Ne xt” button. (5) Browse and choose a directory if the default directory is not prefer red. Click the “ Install” button, afte r selecting a dire ctory to install.
INST ALLA TION AND CONNECTION HVR-04E 16.1.2. Uninstalling DVR Manager (1) Click W indows “S tart” Button. (2) Select and Click ‘Uninstall’ icon to run Uninstall Shield. (3) DVR Manager program will be autom atically deleted. 16.2. Configstation Click icon o n desktop to run “DV R Manager Conf igstation” pr ogram.
HVR-04E INST ALLA TION AND CONNECTION 44 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. 16.3. Monitor Click the relate d icon and run the “ DVR Manager Mo nitor” pro gram. 16.4. Playback Click the r elated icon and run the “DVR Manager Playback” program.
APPENDIX HVR-04E APPENDIX APPENDIX.
HVR-04E APPENDIX 46 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. Appendix #1 Installing and Replacing internal HDD Compa tible HD D It is recommended to use the follow ing HDD models with the HV R-04E. If a non-recommended H DD is used, Hunt Elec tronic USA, Inc.
APPENDIX HVR-04E <Note> The dip switch should b e set at ‘MASTER’ posi tion for th e first installed or built-in HDD. Additional HDD should be set as ‘SLA VE.
HVR-04E APPENDIX 48 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. (5) Fix the HDD wit h provided screws. Co nnect power and dat a cables to HDD Installing single HDD Installing 2 HDDs <Note> Caution for HDD Management 1. Replacing ‘S LA VE’ HDD of inter nal 2 HDDs causes pe rmanent data loss i n the SLA VE HDD.
APPENDIX HVR-04E (8) Assemble the top cov er . Registering & Formatting HDD “Disk Manage r” will automatical ly run on start-up afte r installing a HDD. If “Disk Mana ger” does not automatically run on start-up, make sure the HDD is prop erly installed.
HVR-04E APPENDIX 50 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. (1 1) Select “Ac tion” using [ ▲ / ▼ ] button and press [EX IT] button. (12) Select “Add” using [ ◄◄ / ►► ] button and press [EXIT] butt on. (13) Select “App ly” using [ ▲ / ▼ ] b utton and press [EXI T] button.
APPENDIX HVR-04E Appendi x #2 Video Input Video type / impedance setup sw itch It’ s possible to set up Impedance of V ideo input line. When one V ideo out put is connecte d to several Input as below , the impedance of one inpu t should be 75 ohm.
HVR-04E APPENDIX 52 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. Appendix #3 Using CD-ROM Compon ents of CD- ROM disc Installation Guide : HVR-04E Installatio n Guide User ’ s Guide : HVR-04E User ’ s Guide DVR Manager : DVR Manager User ’ s Guide ( HVR-04E Remote Mana gement Pr ogram) Acrobat Reade r : V ersion 5.
APPENDIX HVR-04E Appendix #4 Specification General CPU 32bit RISC Processor (200MIPS) Flash Memory 8MB Main Memory 64MB OS Embedded LINUX V ideo Ch annel 4 Analog Channel & 1 2 IP V ideo Channel (N TSC or P AL) S torage Device Internal 3.5” IDE HDD 2EA (default 1EA) External 3EA for IEEE1394 Interface Support Max.
HVR-04E APPENDIX 54 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. Disp lay Monitoring Max. 120ips (A nalog V ideo 60ips) ( I P V i d e o 6 0 i p s ) Vi e w e r 1ch, 4ch, 9ch, 13ch, 16ch, Auto Sequenti al Playback Perf ormance Max.
APPENDIX HVR-04E PTZ Control Serial Port RS232(1), RS 485(1), RS422(1) Contr ol Method ( Local) Front panel b utton & IR remote controller (control IP video channel as well) Contr ol Method (Remot.
HVR-04E APPENDIX 56 2003.05.21 (v 1.0) Hunt Electron ic USA, Inc. Mechanical Dime nsi on (W ⅹ D ⅹ H) 306 ⅹ 280 ⅹ 67(mm) We i g h t 3.5Kg (With one HDD).
APPENDIX HVR-04E Hunt Electronic USA, Inc. 978 W est 10 th St r e e t Azusa, Californ ia 91702 T el : (626) 812-8868 Fax : (626) 812-882 8 T echnical Support: 1-88 8-993-4868 URL: www .
An important point after buying a device Maxtor HVR-04E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxtor HVR-04E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxtor HVR-04E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxtor HVR-04E you will learn all the available features of the product, as well as information on its operation. The information that you get Maxtor HVR-04E will certainly help you make a decision on the purchase.
If you already are a holder of Maxtor HVR-04E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxtor HVR-04E.
However, one of the most important roles played by the user manual is to help in solving problems with Maxtor HVR-04E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxtor HVR-04E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
