Instruction/ maintenance manual of the product MIM-5802 Maxi-Matic
Go to page of 11
PORTABLE AUTOMATIC ICE MACHINE Model MIM-5802 Instruction Manual Before operating your new app liance, please read all ins tructions carefully and keep fo r future reference.
TABLE OF CONTENTS IMPORTANT SAFEGUARDS__ _______________________ _____________ 2 PARTS IDENTIFICATION _____ ______________________________ _____ 3 BEFORE FIRST USE________________ ____________________.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should b e followed to reduce the risk of fire, electric shock, and injury to persons or property.
… PARTS IDENTIFICATION Both the Filter and the Silicone Plug are located below the Ice Basket on the bottom of the unit ( See p a g e 7 ) . 3.
…. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug.
…. INSTALLATION 1. Ventilati on : Do not block air vents. It is necessary to have adequate ventilation space around the ice maker in order to sustain proper performance, dissipation of heat, maintain efficiency and keep power consumption low.
… OPERATING INSTRUCTIONS 1. Open the lid, remove the Ice Ba sket and pour water into the water reservoir. Do not exceed the maximum water level line or fill less than the minimum water level line (See Figure 1). 2. Place the Ice Ba sket back into the ice maker.
…. CARE & MAINTENANCE 1. Unplug the unit and remove the ice basket. 2. Pull out (upwards towards you) the Silicone Plug which is located at the bottom of the water tank beneath the ice basket. (See figure 3). Make sure there is a large bucket or bowl placed underneath the unit to catch the water draining from the ice maker.
TROUBLESHOOTI TROUBLESHOOTING Problem Possible Cause Suggested Solutions The compressor works abnormally with a buzzing noise The voltage is lower than recommended Stop the Ice maker and do not restart until the voltage is normal. The ADD WATER light is on 1.
LIMITED WARRANTY* ONE (1) YEA R WARRANTY IS ONLY VA LID WITH A DATED PROOF OF PURCHASE 1. Your small kitchen appliance is built with precision, inspected and tested before leaving our factory. 2. It is warranted, to the original purchaser to be free from any manufacturing defects under normal use and conditions for one (1) year, cord excluded.
10 RETURN INSTR UCTIONS RETURNS: A. Any return of defective merchandise to the manufacturer must be processed accordingly by first contacting customer service (contact information shown below) to obtain an RA # (Return Aut horization Number) . We will not accept any returns of merchandise without an applicable RA #.
An important point after buying a device Maxi-Matic MIM-5802 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Maxi-Matic MIM-5802 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Maxi-Matic MIM-5802 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Maxi-Matic MIM-5802 you will learn all the available features of the product, as well as information on its operation. The information that you get Maxi-Matic MIM-5802 will certainly help you make a decision on the purchase.
If you already are a holder of Maxi-Matic MIM-5802, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Maxi-Matic MIM-5802.
However, one of the most important roles played by the user manual is to help in solving problems with Maxi-Matic MIM-5802. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Maxi-Matic MIM-5802 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
