Instruction/ maintenance manual of the product RADIANT PANEL SYSTEM Master Lock
Go to page of 8
5A. RADIANT PANEL SYSTEM ® PLANNING & INSTALLATION MANUAL (rev) ROTH HEATING SYSTEMS.
5A. INTRODUCTION The Roth Radiant Panel System ® was developed fo r the wood f rame houses of the North American and Sc andinavia n markets. It was designed for easy inst allation over any new or existing sub-flo or, wood or concrete, and for use with many different floor cove rings, such as carpet, tile or hardwood.
5A. INSTAL LATION IN STRUCTIONS 5A.1 Planning Roth Ra diant Panel System s ® can be installed on all types of sub-floors, which comply with the current building regulations for load-be aring structur es. If the sy stem is going to be installed upon an ex ist in g sur fa ce m at eri al (e.
5A. INSTAL LATION IN STRUCTIONS 5A.3 Installation of the Panel The sub-floor must be smooth, cl ean and level. Surf ac e irregularities shou ld not exceed more than 0.02" per foot. The Roth Radiant Panel System ® should be secured to the subfloor wit h countersunk screws or a foam bo ard com pat ible adhesive.
5A. INSTAL LATION IN STRUCTIONS Continue to lay the master panels. When cutting the master panels, mark the plate and sa w it with EPS side up. You can use any saw with a fine-toothed metal blade. A fter cutting the panel, re move any burrs. When cutting the last master panel in the fir st row, use the rest of the panel t o start the next row.
5A. INSTAL LATION IN STRUCTIONS 5A.4 Installation of PEX-tubing Start the tubing installation by connecting the PEX tubing to the manifold. Loops can be pre-cut if you have figured the correct leader length (from t he manifold to the actual heated area) when designing the system with our software.
5A. INSTAL LATION IN STRUCTIONS 5A.5 Pressure Test/Start-up After instal lation of the p anel an d tubing, b ut bef ore layin g the fi nished floor, you need to perform a pressure test. Fill the sy s te m w i t h a i r o r w a t e r a n d m a i n t a in a pressure of 2 to 3 times the working pressure of the system, abo ut 25 to 50 psi (1.
E 16 Roth's success is the result of fle xibility in products, tar geted in vestments and theme oriented solutions. Our gro wth stems from continuous research and de v elopment of ne w and innov ati ve products.
An important point after buying a device Master Lock RADIANT PANEL SYSTEM (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Master Lock RADIANT PANEL SYSTEM yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Master Lock RADIANT PANEL SYSTEM - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Master Lock RADIANT PANEL SYSTEM you will learn all the available features of the product, as well as information on its operation. The information that you get Master Lock RADIANT PANEL SYSTEM will certainly help you make a decision on the purchase.
If you already are a holder of Master Lock RADIANT PANEL SYSTEM, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Master Lock RADIANT PANEL SYSTEM.
However, one of the most important roles played by the user manual is to help in solving problems with Master Lock RADIANT PANEL SYSTEM. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Master Lock RADIANT PANEL SYSTEM along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
