Instruction/ maintenance manual of the product UT-300SI Master Appliance
Go to page of 5
Designers and Manuf acturers of Heat T ools f or Industr y Ultrator ch ® UT -300Si Heat T ool Instruction Manual UT-300 Si Made in Japan Please read, understand and keep this manual f or future refer.
UT-300 Si Regulatory Information Description Principles of Operation Declaration of Conf ormity (According to EN 45014) Manufacturer’ s Name: Master Appliance Corp.
After Ignited Ignition Instructions Use as a Soldering Iron or Heat T ool Important Safety Instructions 1. Loosen knurled nut to remov e tip and tip housing. 2. Replace soldering tip with hotblo w tip and re-install tip housing onto unit. Knurled nut Tip housing Soldering tip 1.
To Replace Ejector Storage of Y our Ultrator ch Heat T ool Tr ouble Shooting HO W TO REMO VE 1. Loosen knurled nu t and remove tip and tip housing. 2. Un-screw the scre w with minus- head driver as illustrated. 3. Pull out the burner . 4. Loosen the ejector by inserting the minus- head driver and turn counter clockwise.
Optional Accessories Ultratane™ Butane “UL TRA-REFINED” by Master…the only approved b utane for Ultratorches . • Single piece universal tip • Purest refining method possible • Special no.
An important point after buying a device Master Appliance UT-300SI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Master Appliance UT-300SI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Master Appliance UT-300SI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Master Appliance UT-300SI you will learn all the available features of the product, as well as information on its operation. The information that you get Master Appliance UT-300SI will certainly help you make a decision on the purchase.
If you already are a holder of Master Appliance UT-300SI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Master Appliance UT-300SI.
However, one of the most important roles played by the user manual is to help in solving problems with Master Appliance UT-300SI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Master Appliance UT-300SI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
