Instruction/ maintenance manual of the product Micromark 801 Markbass
Go to page of 12
owner’s manu al mICromarK 801 - mInImarK 802 v . 1 1.december.2013.
02 1. IMPORT ANT SAFETY INSTRUC TIONS 1) Read these instructions; 2) Keep these instructions; 3) Heed all warnings; 4) Follow all instructions; 5) Do not use this apparatus near water; 6) Clean only with dry cloth; 7) Do not block any ventilation openings.
03 2.C ONTENTS MICROMARK 801 INTRODUCTION 3 PRODUCT OVERVIEW 4 FUNCTIONS OVERVIEW (TOP P ANEL) 4 FUNCTIONS OVERVIEW (REAR P ANEL) 5 TECHNICAL SPECS 6 GRAPH 6 BL OCK DIAGRAM 6 MINIMARK 802 PRODUCT OVERVIEW 7 FUNCTIONS OVERVIEW (TOP P ANEL) 7 FUNCTIONS OVERVIEW (REAR P ANEL) 8 TECHNICAL SPECS 9 GRAPH 9 BL OCK DIAGRAM 10 3.
04 4. MICROMARK 801 PRODUCT OVERVIEW The Micromark 801 is a compact, high-quality bass combo amp with a solid-state preamp and an analog power amp , which delivers 45W of power into one y ellow 8” Markbass neodymium woofer .
05 4.2 MICROMARK 801 FUNCTIONS OVERVIEW (REAR P ANEL) SPEAKER ON/OFF (6) Use this switch to turn o the amp ’ s speaker when using headphones or using only the extension cabinet. LINE OUT (8) This balanced XLR output may be used for r ecording or live situations .
5. MICROMARK 801 TECHNICAL DET AILS INPUTS INPUT Impedance: 500 Kohm, max. voltage: 8 Vpp AUX INPUT Impedance: 33 Kohm, max. voltage: 20 Vpp CONTROLS VOL UME (Level) –60 dB to +25 dB range GROUND LI.
07 8. MINIMARK 802 PRODUCT OVERVIEW The Markbass Minimar k 802 is a compact, high-quality bass combo amp with a solid-state preamp and an analog power amp , which delivers 150W of power into two y ellow 8” Markbass neodymium woofers and a piezo tweeter .
08 8.2 MINIMARK 802 REAR P ANEL SPEAKERS ON/OFF (11) Use this switch to turn o the amp ’ s speakers and extension cabinet (if applicable) when using headphones. LINE OUT (12) This balanced XLR output may be used for r ecording or live situations .
09 9 MINIMARK TECHNICAL DET AILS INPUTS INPUT impedance: 500 Kohm, max. voltage: 10 Vpp AUX INPUT impedance: 33 Kohm, max. voltage: 15 Vpp CONTROLS VOL UME (LEVEL) -45 dB to +28 dB range GROUND LIFT s.
10 VLE (min-max) -40 -30 -20 -10 0 10 20 30 10 100 1000 10000 100000 Frequency - Hz dB VPF (max) -20.00 dB -15.00 dB -10.00 dB -5.000 dB 0.00 dB 5.00 dB 10.
.
Italy - 66020 San Giovanni T eatino (Ch) - Via Po, 52 - T el. +39 085 446 3755 - Fax +39 085 440 7764 - www .markbass.it - info@markbass.it Product specifications are subject to change without notice.
An important point after buying a device Markbass Micromark 801 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Markbass Micromark 801 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Markbass Micromark 801 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Markbass Micromark 801 you will learn all the available features of the product, as well as information on its operation. The information that you get Markbass Micromark 801 will certainly help you make a decision on the purchase.
If you already are a holder of Markbass Micromark 801, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Markbass Micromark 801.
However, one of the most important roles played by the user manual is to help in solving problems with Markbass Micromark 801. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Markbass Micromark 801 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
