Instruction/ maintenance manual of the product SR8001 Marantz
Go to page of 79
Model SR7001/SR8001 User Guide A V Surround Receiver.
CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CA UTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR B A CK) NO USER-SER VICEABLE P ARTS INSIDE REFER SER VICING T O QU ALIFIED SER .
12. Grounding or Polarization – This product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fi t into the power outlet only one way . This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug.
ENGLISH 1 T ABLE OF CONTENTS 6 ACOUSTIC EQ ............................................................38 B ASIC OPERA TION (PLA Y BA CK) .....40 SELECTING AN INPUT SOURCE ................................... 40 SELECTING THE SURROUND MODE ............
ENGLISH 2 DESCRIPTION THX ® is an exclusive set of standards and technologies established by the world-renowned fi lm production company , Lucasfi lm Ltd. THX resulted from George Lucas’ desire to reproduce the movie soundtrack as faithfully as possible both in the movie theater and in the home theater .
ENGLISH 3 Neo:6 offers several important improvements as follow , • Neo:6 provides up to six full-band channels of matrix decoding from stereo matrix material. Users with 6.1 and 5.1 systems will derive six and fi ve separate channels, respectively , corresponding to the standard home-theater speaker layouts.
ENGLISH 4 Dolby Virtual Speaker is a technologycertified by Dolby Laboratories that creates a virtualized surround sound experience from two speakers using a multichannel Dolby Digital source. Additionally , Dolby Virtual Speaker can simulate the surround sound effect produced by Dolby Pro Logic or Dolby Pro Logic II .
ENGLISH 5 FEA TURES The SR7001 incorporates the latest generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS ES (Discrete 6.
ENGLISH 6 Notes: • When using headphones, the surround mode will change to STEREO and Dolby Headphone by MENU and Cursor button. • The surround mode returns to the previous setting as soon as the headphone plug is removed from the jack. r SURROUND MODE b utton Y ou can select the surround mode by pressing this button.
ENGLISH 7 FL DISPLA Y AND INDICA TER DISP MULTI AUT O TUNED ST V – OFF NIGHT PEAK ANALOG DIGITAL ATT SLEEP SURR AUTO DISC 6.1 DIRECT MT X 6. 1 SPKR AB DIGITAL SURROUND PC M L C R SL S SR LFE ¡ 6 g .
ENGLISH 8 y XM terminal See page 19 for connecting information. u Sub Speaker outputs terminals (MUL TI SPEAKER / SPEAKER C) T wo terminals are provided for the front left, and right speakers for multi room. The terminals can be used to connect a third set of speakers by setting the SPEAKER C selector switch to ON.
ENGLISH 9 REMOTE CONTROLLER RC8001SR NAMES AND FUNCTIONS z Infrared T ransmitter and Learning Sensor This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the SR7001 or other A V equipment.
ENGLISH 10 LCD INDICA TORS Information about currently selected source and direct code names are displayed on the LCD. LEARN NAME MACRO USE PAGE 123 4 A B C D E F G H I J A Source Name indicator This displays the name of the selected source, such as DVD, television, or other A V equipment (up to fi ve characters).
ENGLISH 11 REMOTE CONTROL RANGE The distance between the transmitter of the remote control and the IR SENSOR of the SR7001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them, use of the remote control may not be possible.
ENGLISH 12 TUNER MODE AMP MODE 2 3 1 5 6 4 8 0 9 7 MEMO CLEAR DSS AMP AUX2 AUX1 TAPE TUNER CD CD-R MD VCR DVD TV SOURCE OFF ON/OFF POWER ON D4 D5 D2 M D1 D3 D5 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.SEL SURR 7.1CH ATT SPK-AB DISP OSD SLEEP 12 LIGHT Learning Remote Controller RC8001SR D1 D5 D4 D2 D3 D5 2 3 1 5 6 4 8 9 7 TEST CH.
ENGLISH 13 CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7- speaker systems, using front left and right speakers, a center speaker , surround left and right speakers, a surround back left and right speakers, and a subwoofer .
ENGLISH 14 Caution: • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • T o prevent damage to circuitry , do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit.
ENGLISH 15 HDMI JACK This SR7001 has four HDMI inputs and one HDMI output (The SR8001 has two HDMI outputs.). It can send digital video and audio signals from DVDs and other sources directly to a display . It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed.
ENGLISH 16 2 2 OUT OUT R R L L AUDIO AUDIO IN IN IN IN OUT OUT VCR1 VCR1 DVD DVD DVD DVD ( ( 2 2 ) ) VCR1 VCR1 ( ( 3 3 ) ) C C R R / / P P R R C C B B / / P P B B Y Y OUT OUT PUT PUT 1 1 COMPONENT COM.
ENGLISH 17 IN OUT S-VIDEO IN OUT 2 1 SL L RS R FLASHER IN IR RECEIVER IN OUT L E CD/CDR OUT MULTI OUT R O U T N SR IN SL C B / P B C R / P R C R / P R C R / P R C B / P B C B / P B Y Y SBR SBL SBR SBL C SW SW C 1 2 EMITTER OUT AB OUT PUT 1 OUT PUT 2 OUTPUT 1 OUTPUT 2 U T 1 ( TV ) INPUT 4 ( DSS/VCR2 ) U T 3 ( VCR1 ) T 4 ( DSS/VCR2 ) HDMI Ver1.
ENGLISH 18 CONNECTING THE ANTENNA TERMINALS COMPONENT VIDEO IN OUT S-VIDEO IN OUT 2 1 SL L RS R FLASHER IN IR RECEIVER IN SPEAKER SYSTEMS OUT 6 COAX. 3 5 4 2 1 SURROUND BACK OUT R OUT L TAPE CD/CDR ON OFF OUT IN MULTI OUT R OUT L DSS/VCR2 AUDIO TV IN OPT.
ENGLISH 19 XM RADIO OVERVIEW SR7001 is the XM Ready ® receiver . Y ou can receive XM Satellite Radio ® by connecting to the XM Connect- and-Play TM or Passport system (sold separately) and subscribing the XM service. Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM.
ENGLISH 20 COMPONENT VIDEO IN OUT S-VIDEO IN OUT 2 1 SL L RS R FLASHER IN IR RECEIVER IN SPEAKER SYSTEMS OUT 6 COAX. 3 5 4 2 1 SURROUND BACK OUT R OUT L TAPE CD/CDR OUT IN R OUT L DSS/VCR2 TV IN OPT.
ENGLISH 21 a RS232C Connect an external control device or other device for servicing. (Use a straight cable for the connection.) s DC OUT (DC TRIGGER) External devices can be controlled from the SR7001 by connecting them to the DC OUT terminal (12 V).
ENGLISH 22 SETUP After all components are connected, initial setup must be performed. ONSCREEN DISPLA Y MENU SYSTEM The SR7001 incorporates an onscreen menu system, which makes various operations possible by using the cursor ( 3 , 4 , 1 , 2 ) and OK / ENTER buttons on the remote control unit or on the front panel.
ENGLISH 23 Note: • After you complete this portion of the setup, move cursor to “ RETURN ” with the 3 , 4 , 1 and 2 cursor buttons and press the OK / ENTER button. MAIN MENU 1.INPUT SETUP 2.SPKR SETUP 3.SURR SETUP LOCKED 4.VIDEO SETUP 5.PREFERENCE UNLOCK 6.
ENGLISH 24 1 INPUT SETUP This menu is for setting the matching the output of connected audio devices and the input jacks of this receiver . • FUNC INPUT SETUP : “1-1 FUNC INPUT SETUP” (see page 25) • 7.1 CH INPUT SETUP : “1-2 7.1 CH INPUT SETUP” (see page 25) • FUNC RENAME : “1-3 FUNCTION RENAME” (see page 26) 1.
ENGLISH 25 1-1 FUNC INPUT SETUP (ASSIGNABLE DIGIT AL INPUT) The 6 and F (Front) digital inputs can be assigned to a desired source. HDMI and COMPONENT inputs can be assigned to the preferred source. Use this menu to select which digital input jacks are to be assigned to which input source.
ENGLISH 26 1-3 FUNCTION RENAME Input sources can be registered under any name. This menu is for renaming input source. This menu is for renaming function name. Names can be up to 10 characters long, including spaces. (Characters are selected from those appearing on the display .
ENGLISH 27 2 SPKR (SPEAKER) SETUP After you have installed the SR7001 connected all the components and determined the speaker layout, it is now time to perform the settings in the Speaker Setup menu for the optimum sound acoustics for your environment and speaker layout.
ENGLISH 28 Note: • The detection check measures the state of use of all speakers whether actually used or not. For example, if the center speaker is not used, the test tone will require time to go from the L-channel to the R-channel, therefore be careful not to unplug the microphone or operate the SR7001 during this time.
ENGLISH 29 8. 8. Move the microphone to the second listening position, select “ ST ART ” with the 3 / 4 cursor buttons and press the OK/ENTER button to measure the second point. At this point, you can cancel second point measurement and calculate measurement results by selecting “ CALCULA TE ” and pressing the OK/ENTER button.
ENGLISH 30 ERROR MESSAGES Displayed Err or Cause How to Remedy MIC SET ERROR!! AUTO SETUP AUTO SETUP: START MAIN ROOM SURR BACK: 2CH MIC SET ERROR!! RETURN EXIT • The microphone is not properly connected. • Connect the included microphone. • Check the microphone connection.
ENGLISH 31 2-2 MANUAL SETUP 1. Select “ 2. SPKR SETUP ” from the MAIN MENU. 2. Select “ MANU AL SETUP ” with the 3 or 4 cursor buttons. 3. Press the OK / ENTER button to enter the selection. <SPEAKER SIZE> SPEAKER SIZE THX SPKR : NO SUB W : YES FRONT : SMALL CENTER : SMALL SURR.
ENGLISH 32 SUB W: Set the distance from the subwoofer to your normal listening position. SURR. B L: Set the distance from the surround back left speaker to your normal listening position. SURR. B R: Set the distance from the surround back right speaker to your normal listening position.
ENGLISH 33 3 SURROUND SETUP This menu is for setting surround effect parameters for the various surround input signals so as to bring out the live audio effect of your speaker system.
ENGLISH 34 SUB W LEVEL: Set the effect level of the subwoofer speaker between –18 and +12 level in 0.5 level interval . • If “ NONE ” was selected for the subwoofer speaker setting in the SPEAKER SIZE, then this setting will not appear .
ENGLISH 35 4 VIDEO SETUP Video settings are made as follows. 1. Select “4. VIDEO SETUP” from the MAIN MENU with the 3 / 4 cursor buttons and press the OK/ENTER button. 4.VIDEO SETUP VIDEO CONVERT TV . AUTO :DISABLE OSD INFO :ENABLE I/P CONVERT :ENABLE HDMI OUT :OUTPUT1 COMPO OUT2 :MAIN RETURN NEXT EXIT 2.
ENGLISH 36 5 PREFERENCE • MUL TI ROOM SETUP : “5-1 MUL TI ROOM SETUP” (see page 37) • DC TRIGGER SETUP : “5-2 DC TRIGGER SETUP” (see page 37) 1. Select “ 5. PREFERENCE ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK / ENTER button.
ENGLISH 37 5-1 MUL TI ROOM SETUP The SR8001 has source selectors, sleep timers and multispeaker output remote control units (Room A only) for the two other rooms in the multi room system. (The SR7001 has only one other room in the multi-room system.) These features can be set from this menu.
ENGLISH 38 6 ACOUSTIC EQ This display is for setting up the equalizer and changing the Equalizer mode. • PRESET G. EQ ADJ : “6-1 PRESET G. EQ ADJ” (see page 39) • CHECK A UTO 1 & 2 : “6-2 CHECK AUTO” (see page 39) EQ MODE: There are 4 equalizer modes to choose from: PRESET G.
ENGLISH 39 6-2 CHECK AUTO These menus are for confirming the results of AUTO SETUP function equalizer measurement (AUDYSSEY , FRONT , FLA T). 1. Select “ 6. A COUSTIC EQ ” from MAIN MENU with the 3 or 4 cursor buttons and press the OK / ENTER button.
40 ENGLISH ADJUSTING THE MAIN VOLUME DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO VOLUME UP DOWN READY MultEQ A/B T-MODE MEMORY CLEAR DISPLAY EXIT SPEAKERS BAND MIC L C R SL S SR LFE DIGITAL SURROUND G HT E AK ANALOG DIGITAL ATT EQ PCM AAC 2 3 1 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.
41 ENGLISH TEMPORARILY TURNING OFF THE SOUND 2 3 1 5 6 4 8 9 7 OK PREV MUTE MENU EXIT GUIDE TEST CH.SEL LIP.SYNC SURR 7.1CH ATT SPK-AB DISP OSD SLEEP MUTE T o temporarily silence all speaker outputs such as when interrupted by a phone call, press the MUTE button on the remote.
42 ENGLISH Note: • When playing Dolby Digital Surround EX-encoded software in 6.1 channels, it is required to select the THX Surround EX mode. THX SELECT2 CINEMA THX SELECT2 Cinema mode plays 5.1 movies using all 7.1 speakers giving you the best possible movie watching experience.
43 ENGLISH EX/ES This mode provides 6.1 channel surround for Dolby Digital EX, and DTS-ES-encoded source material such as DVD. This mode cannot be used when an analog input has been selected.
44 ENGLISH Surround Mode Input Signal Decoding Output Channel Front information display L/R C SL SR SBL SBR SubW Signal format indicators Channel status AUTO Dolby Surr .EX Dolby Digital EX OOOOO 2 DIGIT AL EX L, C, R, SL, SR, S, LFE Dolby D (5.1ch) Dolby Digital 5.
45 ENGLISH Surround Mode Input Signal Decoding Output Channel Front information display L/R C SL SR SBL SBR SubW Signal format indicators Channel status Dolby Virtual Speaker Dolby Surr .EX Dolby Virtual Speaker O ---- 2 DIGIT AL EX L, C, R, SL, SR, S, LFE Dolby D (5.
46 ENGLISH O THER FUNCTION TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV -VIDEO in jack to control the power (ON/OFF) to the SR7001. AUTO POWER ON 1. Be sure the TV auto mode is ENABLED. (Refer to page 35: PREFERENCE) 2.
47 ENGLISH RECORDING AN ANALOG SOURCE In normal operation, the audio or video source selected for listening through the SR7001 is sent to the record outputs.
48 ENGLISH SPEAKER A/B DIGITAL VIDEO S-VIDEO AUX 1 INPUT VOLUME DOWN MultEQ ENTER MENU 7.1CH INPUT MULTI A/B T-MODE MEMORY CLEAR DISPLAY EXIT SPEAKERS BAND MIC SPEAKER MULTI L C R SL S SR LFE DIGITAL SURROUND V-OFF U LTI AUTO TUNED ST SPKR A B NIGHT PEAK ANALOG DIGITAL ATT SURR DIRECT AUTO DISC 6.
49 ENGLISH 1. T o select tuner , Press the TUNER button twice within two seconds on the remote. 2. Press the > button until P AGE 1 isdisplayed. 3. Press the BAND (D5) button to select either FM or AM. 4. Press the GUIDE on the remote, display will show “FREQ----” .
50 ENGLISH PRESET SCAN 2 3 1 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.SEL LIP.SYNC SURR CH MUTE 4. AMP AUX2 AUX1 TAPE TUNER CD CD-R MD 12 LIGHT Learning Remote Controller RC8001SR 1. TUNER D4 D5 D2 M D1 D3 D5 2. 2. 5. USE PAGE 2 D4 5 6 4 8 0 9 7 MEMO CLEAR DISP OSD THX SLEEP 5.
51 ENGLISH NAME INPUT OF THE PRESET ST A TION. This function allows the name of each preset channel to be entered using alphanumeric characters. Before name inputting, you need to store preset stations with the preset memory operation.
52 ENGLISH LISTENING TO XM SA TELLITE RADIO SELECTING AN INPUT SOURCE Before you can listen to XM Satellite Radio, you must fi rst select the input source on the SR7001. STANDBY PHONES INPUT SELECTOR AV SURROUND RECEIVER SR8001 PURE DIRECT THX MODE AUTO M PURE DIRECT SURROUND DSD POWER ON/STANDBY DISP MULTI SLEEP AU T 1.
53 ENGLISH When the Artist name/Song title is displayed: NAME/TITLE Pink Floid / Floid / Money The “NAME/TITLE” is displayed for 2 seconds, followed by the artist’s name and song title. (If artist’s name or song title is more than 13 characters long, the text is scrolled.
54 ENGLISH CA TEGORY SEARCH MODE Y ou can select the desired channel from the category allocated to each channel. Category being aired can be only selected.
55 ENGLISH PRESET SCAN D4 D5 D2 M D1 D3 D5 D4 U S E PAGE 2 2. 3.5. DSS AMP AUX2 AUX1 TAPE TUNER CD CD-R MD VCR DVD TV 12 LIGHT Learning Remote Controller RC8500SR TUNER 1. 2 3 1 5 6 4 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.SEL LIP.SYNC SURR 7.1CH ATT SPK-AB DISP OSD SLEEP CH 5.
56 ENGLISH MUL TI R OOM SYSTEM The Multiroom System mode allows the same source or different sources to be heard in two rooms other than where this receiver is installed. T o use the multiroom system, connect the audio from the MUL TI OUT A and B AUDIO output terminals to the MUL TI ROOM A and B amps.
57 ENGLISH OPERA TION OF THE MUL TI ROOM OUTPUTS WITH THE REMOTE CONTROL FROM MUL TI A Room A output can be operated from a room where the receiver is not installed. This requires a separately sold IR receiver . (For connections, see page 12.) D4 D5 D2 M D1 D3 D5 U S E PAGE 123 4 D1 1.
58 ENGLISH REMO TE CONTR OLLER OPERA TION CONTROLLING MARANTZ COMPONENTS 1. Press the desired function button. • The selected function name and USE are displayed in the LCD. 2. Press the desired operation buttons to play the selected component. • For details, refer to the component’ s user guide.
59 ENGLISH CONTROLLING A MARANTZ CD RECORDER (CDR MODE) CONTROLLING A MARANTZ MD DECK (MD MODE) CONTROLLING A MARANTZ T APE DECK (T APE MODE) 2 3 1 5 6 4 8 0 9 7 MEMO CLEAR DSS AMP AUX2 AUX1 TAPE TUNER CD CD-R MD VCR DVD TV SOURCE OFF ON/OFF POWER ON D4 D5 D2 M D1 D3 D5 OK VOL CH PREV MUTE MENU EXIT GUIDE TEST CH.
60 ENGLISH BASIC OPERA TION USE MODE (Normal operation status) This remote control is preset with a total of 12 types of remote codes, including Marantz TV (television), DVD, VCR (VCR deck), DSS (satellite broadcasting tuner), TUNER, CD/CD-R, MD, T APE (tape deck), AUX1, AUX2, and AMP (amplifi er).
61 ENGLISH LEARN MODE Programming the 2 (PLA Y) and Other Control But- tons and Numeric Buttons This remote control is capable of learning and storing codes used by other remote controls that you already own.
62 ENGLISH 3. Press the DV D source button . The NAME indicator blinks. The “ ” blinks to indicate that the letter can be changed. 4. Press the 2 cursor button twice. The D in DVD blinks to indicate that the letter can be changed. 5. Press the 1 numeric button to select A .
63 ENGLISH Erasing All This procedure clears (resets) all programmed codes and names. Once all the data is cleared, the memory is returned to the factory default status. The programmed macros are also erased. 1 3 4 LEARN USE PAG E 12 USE PAG E 1 LEARN USE PAG E 12 1.
64 ENGLISH 2. Press the D4 (MACRO) direct button. The macro menu is displayed. The MACRO indicator displays and LEARN blinks. 3. Press the D1 (M-01) direct button . The NAME is displayed. 4. Press the D3 (NAME) direct button . The “ ” blinks to indicate that rewriting is possible.
65 ENGLISH SETTING THE MACRO TIMER Setting the macro timer enables the macro program to automatically turn the power for a device on or off or perform other operations. In the settings, you can select to execute the macro timer everyday or only once. Be sure to set the clock to the correct time before using the timer .
66 ENGLISH • If the copying fails in the middle of the copying process, ERROR is displayed on the remote control. Check and perform steps 1 to 7 again. 11. Once copying is completed, press the M button on both remote controls. SETUP SETTING THE LIGHTING TIME • The LCD lights up when the LIGHT buttons are pressed.
67 ENGLISH TR OUBLESHOO TING In case of trouble, check the follo wing before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifi ers and speaker working properly ? If the unit does not operate properly , check items shown in the following table.
68 ENGLISH HDMI SYMPT OM CA USE REMED Y The display does not appear over an HDMI connection. The connected monitor or projector does not support HDCP . The HDMI input of on the TV is not on. Set HDMI input so that it turns on, as explained in the TV's instruction manual.
69 ENGLISH DIMENSIONS DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO VOLUME UP DOWN STANDBY PHONES READY INPUT SELECTOR AV SURROUND RECEIVER SR8001 MultEQ ENTER MENU PURE DIRECT THX 7.
i SETUP CODES AMPLIFIER Source b utton name : AMP Brand name Setup code Amstrad 0105 Arcam 0296 Audiolab 0296 Carver 0296 GE 0105 Genexxa 0422 Grundig 0296 Harman/Kardon 0919 JVC 0358 Left Coast 0919 .
ii SA TELLITE Source b utton name : DSS Brand name Setup code Nokia 0482, 0750, 0778, 1154, 1250, 1750 OctalTV 1032 Orbitech 1 127 Pace 0482, 0874, 1202, 1350 Panasonic 0274, 0728, 0874, 1347 Panda 04.
iii TV Source b utton name : TV Brand name Setup code Chun Y un 0027, 0207, 0036, 01 19 Chung Hsin 0207, 0080, 0135 Cimline 0036 Cineral 0478, 01 19 Citizen 0087, 0057, 01 19 Clarion 0207 Clarivox 006.
iv TV Source b utton name : TV Brand name Setup code Sambers 0543 Sampo 0181, 0120, 0057, 0205, 0198, 0036, 01 19, 0677, 1782 Samsung 0181, 0087, 0839, 0729, 0057, 0205, 0036, 0064, 01 17, 01 19, 0291.
v VCR Source b utton name : VCR Brand name Setup code Matsui 0375, 0379 Matsushita 0062 Medion 0375 Memorex 0062, 0064, 0075, 0066, 0074, 0267, 0027, 0131, 0334, 0375, 1264 Memphis 0099 Metz 0064, 037.
vi DIRECT BUTT ON FUNCTIONS Source b utton name : AMP P AGE Command Note P AGE 1 1 AUTO SELECT AUTO SURROUND 2 2 SELECT DOLBY MODE 3 DTS SELECT DTS MODE 4 EX/ES SELECT EX/ES 5 DIRECT SELECT PURE DIREC.
www.marantz.com Yo u ca n fi n d yo u r n eare s t a u thorized di s trib u tor or dealer o n o u r web s ite. i s a re g i s tered trademark. Printed in China 06/2006 00M05CW851250 ecmf-d.
An important point after buying a device Marantz SR8001 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Marantz SR8001 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Marantz SR8001 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Marantz SR8001 you will learn all the available features of the product, as well as information on its operation. The information that you get Marantz SR8001 will certainly help you make a decision on the purchase.
If you already are a holder of Marantz SR8001, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Marantz SR8001.
However, one of the most important roles played by the user manual is to help in solving problems with Marantz SR8001. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Marantz SR8001 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
