Instruction/ maintenance manual of the product ADF-150DX Aquapro Fish Feeders
Go to page of 12
Model# AdF-150dX Product Informa tIon GuIde 40 Gallon DIRECTIONAL fIsh fEEDER sYs TEM.
INCLUDED P ARTS 1) Hopper Assembly including Lid (3 Pieces) Poly Barrel Lid Poly Barrel Upper Poly Barrel Funnel 2) Directional Pow er Control Unit - assembly and programming instructions for this uni.
1) Pliers 2) 1⁄4” Wrench 3) 5/32” Wrench 4) #8 Nut Driver (Hand held or for Cordless Drill) 5) Cordless Drill – If Necessar y 5/32” W asher (7 pieces) REQUIRED TOOLS P AGE 3 Latch and strike.
ASSEMBL Y INSTRUCTIONS 1 V erify the contents of the package against the included par ts list. If you are missing any par ts from the list, please contact BA Products immediately at the toll-free number provided. 2 Fir st, remo ve the lid and two hopper assembly pieces and then place the three pieces on the ground.
7 Locate the hinge and install it with the rounded loops facing aw ay from the feeder . Use the 5/32” x 15/32” Bolts and 5/32” W ashers. Place the bolt head on top and the thread por tion toward the bottom on the inside of the hopper . Install the 5/32” Nylon Lock Nuts and tighten securely (Illustration C).
P AGE 6 (Illustration F) (Illustration G) 9 Close the lid and then locate the latch and striker . Fir st, take the strik er por tion and install it onto the lid with the j-lip facing upward.
10 Once the hopper is assembled, make sure that the latch is closed and lay the hopper on its side. Next, locate the square tubing stub leg kit (3 pieces) and unwrap. T ake one stub leg and locate the recessed cavities on the funnel portion of the hopper .
14 With the hopper lying on its side, take one full extension leg section and slide it into the square stub leg that you have already installed on the hopper (Illustration J).
P AGE 9 Once a suitable, level location for the feeder is identified and the unit is properly erected, open lid and fill container with feed/seed to desired capacity , ne ver to exceed 150 lbs. Once done, close the lid and lock the latch securely to insure it does not come off in the event of high winds, etc.
BA Products is not responsible for damage, expense or injur y caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the BA Products’ feeder system. Never lean a ladder against the feeder when filling. Y ou must alwa ys use an alternative method to fill your feeder .
P AGE 11 The AquaPro ® Model #ADF-150 is loaded with features that you can not find anywhere else, such as a domed lid to effectively shed water , a built-in funnel to more efficiently focus feed t.
BA P roduct s 602 Fou nta in Par kw ay , Gr and Pr air ie, T exas 75 050 T el epho ne: (800) 8 47 - 826 9. F a x: (972) 352- 66 33 www .aquaprofishfeeder s.
An important point after buying a device Aquapro Fish Feeders ADF-150DX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aquapro Fish Feeders ADF-150DX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aquapro Fish Feeders ADF-150DX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aquapro Fish Feeders ADF-150DX you will learn all the available features of the product, as well as information on its operation. The information that you get Aquapro Fish Feeders ADF-150DX will certainly help you make a decision on the purchase.
If you already are a holder of Aquapro Fish Feeders ADF-150DX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aquapro Fish Feeders ADF-150DX.
However, one of the most important roles played by the user manual is to help in solving problems with Aquapro Fish Feeders ADF-150DX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aquapro Fish Feeders ADF-150DX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
