Instruction/ maintenance manual of the product CONTROL MASTER PREAMPLIFIER Manley Labs
Go to page of 11
MANLEY LABORATORIES, INC. OWNER'S MANUAL CONTROL MASTER PREAMPLIFIER MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA. 91710 TEL: (909) 627-4256 FAX: (909) 628-2482 email: emanley@netcom.
CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR PREAMPLIFIER 5 FIGURE 1 FRONT PANEL 6 FIGURE 2 REAR PANEL 7 OPERATIONAL NOTES 8 SPECIFICATIONS 9 WARRANTY 10 WARRANTY REGISTRATION 11 SECTIO.
INTRODUCTION ! THANK YOU!... for choosing the Manley Laboratories CONTROL MASTER Preamplifier. Designed by David Manley, the Mastering Room LINE Preamplifier uses the best available parts with the shortest, cleanest, signal path possible. With the use of our own in-house C.
MAINS CONNECTIONS Your preamplifier has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial badge, located on the rear panel. Check that this com- plies with your local supply. Export units for certain markets have a moulded mains plug fitted to comply with local require- ments.
CONNECTING YOUR PREAMPLIFIER Setting up your preamplifier is rather easy. 1. Please refer to page 7 diagram 2 for an illustration of the back of the preamplifier. 2. There are two sets of main outputs, one set UNBALANCED RCA and the other BALANCED XLR.
FRONT PANEL OPERAT E MUT E BALANCE TRIM LEFT RIGHT VOLUM E XL R AU X DI G TAP E TUNE R VIDE O A B C D E F A SELECTOR SWITCH Switch to select between inputs.
REAR PANEL A IEC MAINS SOCKET Standard IEC mains socket (120/240 VAC) B FUSE HOLDERS Right & Left channel fuses. Replace with 1A SLO-BLO fuse only. C VOLTAGE SELECTOR SWITCH Selectable to 110,120 / 220,240 VAC. Set to the proper voltage for your country.
OPERATIONAL NOTES SWITCHING ON The power switch is located on the right hand corner of the front panel. Flip the switch up to turn on the preamplifier and down to turn off the preamplifier. RUNNING It is not recommended that you leave your preamplifier permanently switched on.
SPECIFICA TIONS Vacuum Tubes: 2 x 5814's, 2 x 6414's Gain (line stage) 6 dB Input Impedance 100 Kohm line stages Output Impedance 120 ohms Power Consumption 33 Watts (275mA @ 120VAC).
W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only.
WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades.
An important point after buying a device Manley Labs CONTROL MASTER PREAMPLIFIER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manley Labs CONTROL MASTER PREAMPLIFIER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manley Labs CONTROL MASTER PREAMPLIFIER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manley Labs CONTROL MASTER PREAMPLIFIER you will learn all the available features of the product, as well as information on its operation. The information that you get Manley Labs CONTROL MASTER PREAMPLIFIER will certainly help you make a decision on the purchase.
If you already are a holder of Manley Labs CONTROL MASTER PREAMPLIFIER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manley Labs CONTROL MASTER PREAMPLIFIER.
However, one of the most important roles played by the user manual is to help in solving problems with Manley Labs CONTROL MASTER PREAMPLIFIER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manley Labs CONTROL MASTER PREAMPLIFIER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
