Instruction/ maintenance manual of the product 500 / 200 WATT MONOBLOCK AMPLIFIER Manley Labs
Go to page of 13
MANLEY LABORATORIES, INC. OWNER'S MANUAL MANLEY REFERENCE 500 / 200 W ATT MONOBLOCK MANLEY LABORATORIES, INC. 13880 MAGNOLIA AVE. CHINO, CA. 91710 USA TEL: (909) 627-4256 FAX: (909) 628-2482 email: emanley@netcom.
CONTENTS INTRODUCTION 3 MAINS CONNECTIONS 4 CONNECTING YOUR AMPLIFIER 5 DIAGRAM TOP VIEW 6 DIAGRAM REAR VIEW 7 DIAGRAM FRONT VIEW 8 BIAS PROCEDURES 9 OPERATIONAL NOTES 10 SPECIFICATIONS 11 WARRANTY 12.
INTRODUCTION THANK YOU!... for choosing the Manley 500/200 Monoblock Amplifiers. Designed by David Manley, the Manley 500/ 200 Monoblock Amplifiers use only the best available components, with the sho.
MAINS CONNECTIONS ! W ARNING! TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT OPEN THE CABINET REFER SERVICING TO QUALIFIED PERSONEL GENERAL NOTES LOCATION & VENTILATION The Manley 440/200 Monoblock Amplifiers must be installed in a stable location with ample ventilation.
CONNECTING YOUR AMPLIFIER Setting up your amplifiers is rather easy. 1. Connect all source components (turntable, CD, Tuner, Tape DAT, etc.) to your preamplifier.
Amplifier Overhead View Tube Location OUTPUT TUBES:10 x RUSSIAN 6550 The 6550's used are the Russian Svetlana 6550's. This has been proven to be the rugged and reliable of this type and we strongly emphasize that only the RUSSIAN 6550's should be used in this amplifier.
SPEAKER OUTPUT BINDING POSTS XLR BALANCED INPUT UNBALANCED BALANCED UNBALANCED BALANCED SELECT RCA UNBALANCED INPUT B+ FUSE SLO-BLO MAINS FUSE SLO-BLO MAINS IN IEC REAR VIEW.
FRONT VIEW OF AMPLIFIER WITH BIAS COVER PLATE REMOVED SHOWING BIAS ADJUST POTS READ BIAS FEEDBAC K SLOP E MINIMU M STANDAR D MAXIMU M MAINS POWER ON / OFF SWITCH OPERATE STANDBY EVER-WARM SOFT START S.
BIAS PROCEDURES The Manley 500/200 Monoblock Amplifiers uses a fixed bias system that requires very little attention. We recommend checking the bias every 2-3 months or any time you replace an output tube. To adjust or check the bias, follow the following steps.
OPERATIONAL NOTES SWITCHING ON -- SOFT START The MANLEY 500/200 is equipped with a SOFT-START circuit which lessens the initial stress the amplifier takes upon turn-on. We recommend that you use this soft start facility whenever you turn the amplifier on and especially when cold.
SPECIFICA TIONS Vacuum Tubes: 10 x 6550 (Output), 2 x 6414 (Drivers), 1 x 12AT7 (Input) Output Power TETRODE: 500Watts (@1.5% THD 5 ohm load) TRIODE: 250 Watts (@1.
W ARRANTY All Manley Laboratories equipment is covered by a limited warranty against defects in materials and workmanship for a period of 90 days from date of purchase to the original purchaser only.
WARRANTY REGISTRATION We ask that you please fill out this registration form and send the bottom half to: MANLEY LABORATORIES REGISTRATION DEPARTMENT 13880 MAGNOLIA AVE. CHINO CA, 91710 Registration entitles you to product support, full warranty benefits, and notice of product enhancements and upgrades.
An important point after buying a device Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER you will learn all the available features of the product, as well as information on its operation. The information that you get Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER will certainly help you make a decision on the purchase.
If you already are a holder of Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER.
However, one of the most important roles played by the user manual is to help in solving problems with Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Manley Labs 500 / 200 WATT MONOBLOCK AMPLIFIER along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
