Instruction/ maintenance manual of the product Tub-Master Series Aqua Flo
Go to page of 5
1. READ AND FOLLOW ALL INSTRUCTIONS. 2. WARNING - To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times. 3. CAUTION - This pump is for use with permanently installed pools and may also be used with hot tubs and spas if so marked.
2.) Open air control valves to release any possible air lock. 3.) Make sure all suction and discharge lines are clear and unobstructed and all valves are opened. 4.) Check for air leaks in the suction line. LOW WATER FLOW: 1.) Check filter pressure gauge; filter may need cleaning.
FLO-MASTER ® "TMCP" REPLACEMENT PARTS PART NO. DESCRIPTION REF. NO. PART NO. DESCRIPTION 92770603 92500150 *See Chart Below * 92200270 92830062 56910050 Motor Volute, TMCP Series Seal, Repl.
ASSEMBL Y INSTRUCTIONS (Including Impeller & Seal Replacement) W ARNING E LECTRIC S HOCK : A LWAYS DISCONNECT THE ELECTRICAL POWER FROM THE PUMP MOT OR BEFORE PERFORMING ANY WORK ON THE PUMP UNIT . T o Disassemble Pump C AUTION : D RAIN THE W A TER FROM THE PLUMBING LINES BEFORE DISCONNECTING THE PUMP .
PUMPS FOR THE LEISURE WATER INDUSTRY Box 2526 / Chino, CA 91710 Shipping: 5651 Schaefer Ave. / Chino, CA 91710 FAX: 909/627-5660 TEL: 909/591-7453 www.aqua-flo.com with ceramic ring. Caution: Do not grip impeller sleeve. 3. Reinstall the wear ring over the impeller hub in correct orientation.
An important point after buying a device Aqua Flo Tub-Master Series (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aqua Flo Tub-Master Series yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aqua Flo Tub-Master Series - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aqua Flo Tub-Master Series you will learn all the available features of the product, as well as information on its operation. The information that you get Aqua Flo Tub-Master Series will certainly help you make a decision on the purchase.
If you already are a holder of Aqua Flo Tub-Master Series, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aqua Flo Tub-Master Series.
However, one of the most important roles played by the user manual is to help in solving problems with Aqua Flo Tub-Master Series. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aqua Flo Tub-Master Series along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
