Instruction/ maintenance manual of the product T221D Makita
Go to page of 15
Cordless Applicable staples Stanler Staple capacity Dimensions (L x W x H) Net weight I MODEL T221D MODEL T22lDW With Fast Charger Battery Cartridge 9100 Voltage Charging time 1 Hr. 9.6 V INSTRUCTION MANUAL Model DC9700 Fast Charger Input output A.C. only 50 Hz ~ 60 Hz D.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
I M PO RTANT Length of Cord (Feet) AWG Size of Cord SAFETY 25 50 100 150 18 18 18 16 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. SAVE THESE INSTRUCTIONS - This manual contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
ADDITIONAL SAFETY RULES 1. Always wear safety goggles or safety glasses with side shield, and a full face shield when needed. 2. Do not point the ejection port at anyone in the vicinity (especially his face). Keep hands and feet away from the ejection port area.
Installing or removing battery cartridge Always switch off the tool before insertion 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
Safety system Make sure all safety systems are in working order before operation. The tool must not operate if only the trigger is pulled or if only the safety lever is pressed against the wood.
To secure the sub-magazine in place, push the sub-magazine while pressing the plate spring on the rear of the sub-magazine. CAUTION : 0 Always secure the sub-magazine in place, or the staples can drop out and cause problems.
Driving staples Place the tool on the material to be fastened so that the front and the rear of the tool contact the material flat. Do not tip the tool to the right or left side. Hold the tool firmly against the material, Then pull the trigger to drive the staples.
MAINTENANCE CAUTION : Always remove the battery cartridge before attempting to perform inspection or main- tenance. To maintain product SAFETY and RELIABILITY, repairs, maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts only.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Jan -21- 92 US CORDLESS STAPLER Model T221D Note: The switch and other part configurations may differ from country to country. 13.
MODEL T221D Jan.-21--'92 US __ 26 1 27 1 28 1 29 1 30 1 31 1 32 1 33 1 34 1 35 1 36 1 37 1 38 1 39 1 40 1 41 1 42 1 43 1 44 1 45 1 46 6 47 1 48 3 49 2 I 'iM DESCRIPTION 'L5M AtD DESCRIP.
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Evcry Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita T221D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita T221D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita T221D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita T221D you will learn all the available features of the product, as well as information on its operation. The information that you get Makita T221D will certainly help you make a decision on the purchase.
If you already are a holder of Makita T221D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita T221D.
However, one of the most important roles played by the user manual is to help in solving problems with Makita T221D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita T221D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center