Instruction/ maintenance manual of the product NHPL030 Makita
Go to page of 12
Hammer Drill Capacities Metal Wood I Concrete 10 mm (3/8") MODEL NHPl030 Variable Speed I Reversing Overall Net length weight No load Blows (RPM) minute speed per INSTRUCTION MANUAL DOUBLE INSULATION SPEC I F ICAT IO N S 10" 18mm 10" I - 2,700 I ~ 29,700 I 270" 1 1.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
Installing side grip (auxiliary handle) Screw the side grip on the tool securely Selecting action mode Rotation with hammering : For drilling in concrete, granite, tile, etc., turn the knob so that the c marking is towards the small diamond marking. Be sure to use a concrete and masonry drilling bit.
Installing or removing drill bit CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the bit. To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise.
Reversing switch action This tool has a reversing switch to change the direction of rotation. Move the revers- ing switch lever to the & position for clockwise rotation or the & position for counterclockwise. CAUTION : 0 Always check the direction of rotation before drilling.
CAUTION : *Pressing excessively on the tool will not speed up the drilling. In fact, this excessive pressure will only serve to damage the tip of your bit, decrease the tool performance and shorten the service life of the tool. *There is a tremendous force exerted on the tool/bit at the time of hole breakthrough.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Jan -06-'92 US 10 mm (3/8") HAMMER DRILL Model NHP1030 Note: The switch and other part configurations may differ from country to country. 10.
MODEL NHP1030 ~ 10 11 12 13 14 17 18 19 20 21 ""0" AtD DESCRIPTION 11 21 31 41 51 61 71 82 91 1 1 1 1 1 2 1 1 1 1 ITEM NO, NO USED Pan Head Screw M5x18 Spring Washer 5 Orlll Chuck S10 S.
MAKlTA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita NHPL030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita NHPL030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita NHPL030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita NHPL030 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita NHPL030 will certainly help you make a decision on the purchase.
If you already are a holder of Makita NHPL030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita NHPL030.
However, one of the most important roles played by the user manual is to help in solving problems with Makita NHPL030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita NHPL030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
