Instruction/ maintenance manual of the product N900 Makita
Go to page of 12
Angle Grinder No load speed Overall length Net weight (RPM) 100 mm (4”) MODEL N900 Spindle thread INSTRUCTION MANUAL 10,000 1 255 mm (10”) 1 1.5 kg (3.3 lbs) 1 MlOx 1.25 Manufacturer reserves the right to change specifications without notice. Note: Specifications may differ from country to country.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
Installing side grip (auxiliary handle) Screw the same grip on the tool securely. Installing or removing depressed center wheel CAUTION: Always be sure that the tool is switched off and unplugged before installing or removing the wheel. Screw the inner flange onto the spindle.
To tighten the lock nut, hold the spindle with the wrench so that it cannot revolve, then use the lock nut wrench and securely tighten clockwise. Lock nut wenc If -wrench CAUTION: Use only the Makita wrench and lock nut wrench provided to install or remove the wheel.
Operation Hold the tool firmly. Turn the tool on and wait until the wheel or disc attains full speed. Then apply the wheel or disc to the work- piece. In general, keep the edge of the wheel or disc at an angle of about 15' to the work- piece surface.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. To maintain product SAFETY and RELIABILITY, repairs, carbon brus.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
@Abrasive discs Grit 741404-OBP AC46 Part No. Size lmm) 742036-0-3 742037-8-3 Wheels 10 per Pkg. 742038-6-3 @Cut-off wheel @Lock nut 10 - 30 (For abrasive disc) Part No. 224501-6 @Wire cup brush 75 Part No. 743201-4 @Wire bevel brush 85 Part No. 743203-0 @Grip holder Part No.
100 mm (4") ANGLE GRINDER Model N900 Note: The switch and other part configurations may differ from country to country. 11.
MACHINE ~ 16 17 18 19 20 21 22 24 25 26 27 28 29 E02 E03 1 1 1 2 1 1 1 1 1 1 1 1 6 1 1 0 Ring 11 Needle Bearing 810 Rstainmg Ring S- 12 Spiral Bevel Gear 36 Ball Bearing 6201LB Flat Washer 12 Spindle .
An important point after buying a device Makita N900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita N900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita N900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita N900 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita N900 will certainly help you make a decision on the purchase.
If you already are a holder of Makita N900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita N900.
However, one of the most important roles played by the user manual is to help in solving problems with Makita N900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita N900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
