Instruction/ maintenance manual of the product IMPACT DRIVER 6950 Makita
Go to page of 11
Impact Driver Capacities Machine screw Standard bolt Hiqh tensile bolt MODEL 6950 Equipped with Electric Brake No load speed (RPM) INSTRUCTION MANUAL 4mm ~ 8mm (5132" ~ 5116") DOUBLE INS U L.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
Installing or removing the bit CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the bit. Use only the driver bit or socket bit shown at right.
CAUTION: 0 Always check the direction of rotation before operation. *Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool. Operation Place the point of the driver bit in the screw head.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
June-06-'95 US IMPACT DRIVER Model 6950 w Note: The switch, noise suppressor and other part configurations may differ from country to country. 9.
MODEL 6950 'i,'o" AtD DESCRIPTION June-06-'95 US $:D DESCRIPTION MACHINE ~ 1 2 3 4 5 6 1 8 9 10 11 12 13 14 15 16 17 19 20 21 1 1 1 1 1 4 1 1 2 1 24 1 1 1 1 1 9 1 1 1 - Ring Spring.
P MAKITA LIMITED ONE YEAR WARRANTY 7 . . . . . . .--. . -. . . -- I Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita IMPACT DRIVER 6950 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita IMPACT DRIVER 6950 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita IMPACT DRIVER 6950 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita IMPACT DRIVER 6950 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita IMPACT DRIVER 6950 will certainly help you make a decision on the purchase.
If you already are a holder of Makita IMPACT DRIVER 6950, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita IMPACT DRIVER 6950.
However, one of the most important roles played by the user manual is to help in solving problems with Makita IMPACT DRIVER 6950. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita IMPACT DRIVER 6950 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
