Instruction/ maintenance manual of the product 9200Y Makita
Go to page of 11
MODEL 9200Y INSTRUCTION MANUAL SPEC IF I CAT1 0 N S Sponge dia. I Orbits per min. I Dimensions (Dia. x Height) I Net weight 125 mm (5") I 7,000 114 mm x 95 mm 14-1 12" x 3-34',) ~ 1 0.5 kg (1 1 Ibs) * Manufacturer reserves the right to change specifications without notice.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries. 2. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
15. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect its opera- tion.
ADDITIONAL SAFETY RULES 1. Use only 12 volt DC power source, or the motor will be damaged. 2. Operate the tool only after removing mud and sand from the car body and 3. Do not wet the tool, or the tool will be damaged. 4. Do not bear down the tool excessively during operation.
Installing sponge CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the sponge. Simply attach the sponge to the pad, using the Velcro sheet on the sponge and the pad. (Note) There is no problem even if the alignment of the sponge and the pad is slightly off.
Operation r 1. Waxing Switch on the tool. Move the tool slow- ly over the work surface with front to back, side to side movement while apply- ing light pressure to the tool so that wax will be applied to the work surface thin and evenly. Apply light pressure a Move slowly (Note) *Do not bear down the tool excessively during operation.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection and maintenance. After use 1 Always remove the sponge from the tool and wash the sponge in detergent solution. Dry the sponge thoroughly in a breezy shaded area.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Aug.-22-'91 US WAX-MATE Model 9200Y P Note: The switch and other part configurations may differ from country to country. 9.
MODEL 92OOY Mar.-14-'90 EN 10 11 12 MACHINE 71 81 91 1 1 2 41 51 1 61 1 Tapping Screw BT 4x35 Housing Set 1Wtth Item 81 Switch DC Motor 12 '4. Ball Bearing 609LB Cushion Rma Bumper Housing Set (With Item 2) Name Plats Pad Cord Foot 1Ai Note: The switch and other part specifications may differ from country to country.
P MAKCTA LIMED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 9200Y (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 9200Y yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 9200Y - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 9200Y you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 9200Y will certainly help you make a decision on the purchase.
If you already are a holder of Makita 9200Y, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 9200Y.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 9200Y. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 9200Y along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
