Instruction/ maintenance manual of the product 6891DW Makita
Go to page of 13
Cordless Drywall Screwdriver Capacity Drywall screw 4 mm 15132"l - Equipped with Electric Brake MODEL 6891D MODEL 6891DW With Fast Charger No load speed IRPMI 0 -- 1,400 Dimensions (L x W x HI 230 mm x 55 mm x 260 mm 19" x 2-118'' x 10-1/4"1 Net weight ,3 kg ,2,9 ,bsl INSTRUCTION MANUAL Battery Cartridge 9000 Voltage 9.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 50 100 AWG Size of Cord 18 18 18 1. SAVE THESE INSTRUCTIONS - This manual 150 16 contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
0 When you charge a new battery cartridge or a battery cartridge which has not been used for a long period, it may not acceqt a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it almost completely a couple of times.
Switch action Tool speed is increased by increasing pres- sure on the trigger. To start the tool, simply pull the trigger. Release the trigger to stop. CAUTION : Before inserting the battery cartridge into the tool, always check to see that the trigger switch actuates properly and returns to the "OFF" position when released.
Screwdriving operation Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool. Release the trigger as soon as the stopper touches the workpiece. The electric brake will then stop the tool immediately. NOTE : Use the proper bit for the head of the screw that you wish to use.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Po Now-OS- 92 EN CORDLESS DRYWALL SCREWDRIVER Model 6891D [Typell Note: The switch and other part configurations may differ from country to country. 11.
MODEL 6691D 10 11 Nov.-05-'92 EN 11 21 31 41 51 61 11 61 91 6 1 ITEM NO. NO. USED 12 13 14 15 16 17 16 19 20 21 22 1 Screw M5x33 1 Plane Bearing 5 1 Flat Washer 5 1 GearCompleIe 15-52 1 Plane Bea.
The only way Battery to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. I Ni-Cd To recycle the battery: 1. Remove the battery from the tool. 2. a). Take the battery to your nearest Makita Factory Service Center or b).
An important point after buying a device Makita 6891DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6891DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6891DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6891DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6891DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6891DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6891DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6891DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6891DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
