Instruction/ maintenance manual of the product 6832 Makita
Go to page of 16
Auto Feed Screwdriver No load speed (RPM) 0 -- 2,800 Screw strip 4 mm x 25 mm - 57 mm (5132" x 1" ~ 2-114") MODEL 6832 Variable Speed I Reversing Overall length Net weight 372 mm (14-518") 2.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. KEEP WORK AREA CLEAN.
Ampere Rating More Not More Than Than 0- 6 6 - 10 10 - 12 12 - 16 3 Total Length of Cord in Feet 0 - 25 26 - 50 51 - 100 101 - 150 AWG 18 16 16 14 18 16 14 12 16 16 14 12 14 12 Not Recommended.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
Adjusting the stopper plate (Fig. 1, 2, 3 & 4) There are two kinds of stopper plates; one is for screws 25 mm (1") - 41 mm (1-5/8") long and the other is for screws 40 mm (1-9/16") - 57 mm (2-1/4") long.
Adjust the stopper plate in accordance with the screw length as shown in Fig, 3 81 4. If necessary, loosen the bolts which secure the stopper plate. Fig. 3-1 : For screws 25 mm (1") - 28 mm (1-1/8") long Fig. 3-2: For screws 28 mm (1-1/8") - 35 mm (1-3/8") long Fig.
Setting the slide plate (Fig. 5 & 6) When driving screws 25 mm (I") - 41 mm (1-5/8") long, set the slide plate to the posi- tion shown in Fig. 5. To set the slide plate, press it in the direction of the arrow while depressing the screw in the center of the adjusting knob.
Installing the screw strip (Fig. 8 81 9) Insert the screw strip through the screw guide. Then insert it through the feeder box until the first screw reaches the position next to the driving position. Feeder box Screw strip I Fig. 8 Removing the screw strip (Fig.
Switch action (Fig. 12) CAUTION : Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the trigger. Release the trigger to stop.
Driving operation (Fig. 14) Switch on the tool by pressing the trigger and at the same time pushing the lock button. Hold the tool squarely against the workpiece and apply forward pressure to the tool. The screw will be automatically carried to the driving position and driven into the workpiece.
Extension handle (optional accessory) (Fig. 17) Use of extension handle allows you to drive screws into floors while standing. Fig. 1 11.
MAINTENANCE CAUTION : Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. Replacing carbon brushes Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Mar.-30-'95 US AUTO FEED SCREWDRIVER Model 6832 Note: The switch, noise suppressor and other part configurations may differ from country to country.
Mar.-30-'95 US MODEL 6832 ITEM NO. NO. USED DESCRIPTION $tD DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 8 9 10 I1 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 21 28 29 30 31 32 33 1 1 1 1 1 1 1 1 1 1 1 1.
P MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 6832 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6832 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6832 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6832 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6832 will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6832, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6832.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6832. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6832 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
