Instruction/ maintenance manual of the product 6831DW Makita
Go to page of 15
Cordless Auto Feed Screwdriver Overall length No load speed (RPMI Drywall screw size MODEL 6831D MODEL 6831DW With Fast Charger Net weight INSTRUCTION MANUAL 2,000 4 mm x 25, 28. 32, 40 mm 15/32" x l", 1-118". 1.114". 1-9/16") SPECIFICATIONS 340 mm (1 3.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1. 2.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry tool with finger on switch. Be sure switch is OFF when plugging in.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle, outlet, etc.) be sure the voltage supplied is the same as that specified on the nameplate of the tool. A power source with voltage greater than that specified for the tool can result in SERIOUS INJURY to the user - as well as damage to the tool.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) 25 50 AWG Size of Cord 18 18 FOR CHARGER & 100 150 18 16 BATTERY CARTRIDGE 1. SAVE THESE INSTRUCTIONS - This manual 9. Do not operate charger with damaged cord or plug - replace them im- mediately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Always switch off the tool before insertion or removal of the battery cartridge. To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the tool.
CAUTION: The fast charger Model DC1201 is specifically designed to charge only Makita battery cartridges. Never use it for other purposes or for other manufacturer's batteries. When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge.
Adjusting the driving depth Depress the stopper plate as far as it will go. While keeping it in this position, turn the adjusting knob until the bit tip projects approx.
Carry hook The carry hook is convenient for temporarily hanging the tool. It can be installed on either left or right side of the tool. Hook Switching ON and OFF CAUTl ON: Before inserting the battery cartridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released.
Installing or removing the bit CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. Loosen the bolt which secures the casing. Pull out the casing in the direction of the arrow.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
Apr - 12-'95 US CORDLESS AUTO FEED SCREWDRIVER Model 6831D Note: The switch and other part configurations may differ from country to country. 13.
MODEL 6831D Apr.-12-'95 US 1 1 Name Plate 2 1 Housing Set (With Item 481 3 1 Switch Lever 4 1 Compression Spring 4 5 1 Swntch 6 1 Set Plate ? 1 Battery Holder 8 1 casmg 9 1 Shifter Pin 10 1 Dm1 C.
Recycling the Battery The only way to dispose of a Makita battery is to recycle it. The law prohibits any other method of disposal. To recycle the battery: 1.
An important point after buying a device Makita 6831DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6831DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6831DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6831DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6831DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6831DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6831DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6831DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6831DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
