Instruction/ maintenance manual of the product 6710DW Makita
Go to page of 16
Cordless Screwdriver Wood screws Machine screws MODEL 6710D MODEL 6710DW With Fast Charger weight speed length Nuts INSTRUCTION MANUAL 5 1 mm x 50 mm 11.4' x2'l I SPECIFICATIONS 6 mm 6 mm 220 195 mm 1 1 kg f 114") (1/4") Rimin 17-518") 12.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. 15. 16. 17. 18. 19. 20. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turn- ing it on. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 contains important safety and operating instructions for battery charger.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (SOOF) or ABOVE 4OoC (104OF). 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion 0 To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
Switch action I Trigger switch I 0 Set the reversing switch lever just in front of the trigger switch to Forward (FWD) or Reverse (REV). Then pull the trigger to turn the tool ON and release it to turn it OFF.
Fastening torque adjustment I 0 The fastening torque may be adjusted by turning the adjustment ring to align the notched line on the ring with a number on the indicator label. However, the clearance between the ring and the cap is 2.5 mm (1/8") maximum after one full turn, and the ring should not be forced beyond this point.
Hole 0The hole on the heel of the tool is a con- venient way to carry it by a cord, hook or other means. Drill chuck (Accessory) 0 To install a drill chuck, remove the insert bit by a strong jerk, then a drill chuck can be replaced with the insert bit by a sharp push of the hand.
Screwdriving Match your bit to your screw. Item I Rominal Diameter (mm) Phillips bits Select your screws meter with the chart Bit No. Wood Screw on and the nominal right. dia- )- 2.1 - 2.7 13/32'' - 118") No. 2 3.1 - 4.8 (1/8" - 3/16') No.
MAINTENANCE CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. To maintain product SAFETY and RELlABl LITY, repairs, maintenance and adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
ACC ESSO R I ES #3 CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
0 Battery holster Carrying case Steel case part N~, 823087-3 Plastic case Holster holds extra battery. Part No. 181428-2 Part No. 823033-3C 13.
Aug -09-'84 US CORDLESS SCREWDRIVER Model 67100 Note: The switch and other part configurations may differ from country to country. 14.
MODEL 67101D ’EM $&, DESCRIPTION Aug -0944 US ‘iM & DESCRIPTION MACHINE ~ 1 2 3 4 5 6 7 6 3 10 11 12 13 14 15 - 1 1 1 1 1 1 1 1 1 1 I 1 1 2 1 - Torque Adlust Ring 20 0 Ring 16 Guide Plate .
MAKITA LIMITED ONE YEAR WARRANTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase.
An important point after buying a device Makita 6710DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6710DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6710DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6710DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6710DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6710DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6710DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6710DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6710DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
