Instruction/ maintenance manual of the product 6402 Makita
Go to page of 8
10 mm (318”) MODEL 6402 Variable speedlReversIng Steel INSTRUCTION MANUAL Wood DOUBLE INSULATION 264 mm (10-3/8”) 10 mm (3/8”) 21 mm l53/64”1 0 - 1,200 ~~ ~ - SPECIFICATIONS 1.7 kg (3.7 Ibs) * Manufacturer reserves the right to change specifications without notice.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
Installing or removing drill bit CAUTION : Always be sure that the tool is switched off and unplugged before installing or removing the bit. To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand. Place the chuck key in each of the three holes and tighten clockwise.
Drilling operation 0 Drilling in wood When drilling holes in the wood, use a wood drill with a guide screw. The guide screw makes it bore naturally by itself, so you do not need to apply any pressure to the tool.
ACCESSORIES CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. The accessories or attachments should be used only in the proper and intended manner.
10 mm (3/8") @" DRILL Model 6402 July 06-88 US Note: The switch, noise suppressor and other part configurations may differ from country to country.
MAKnA LIMITED ONE YEAR WARRAHTY Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchore.
An important point after buying a device Makita 6402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 6402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 6402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 6402 you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 6402 will certainly help you make a decision on the purchase.
If you already are a holder of Makita 6402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 6402.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 6402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 6402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
