Instruction/ maintenance manual of the product 4390DW Makita
Go to page of 12
Cordless Recipro Saw Length of stroke 15” W16”) MODEL 43901) MODEL 4390DW With Fast Charger Max. cutting capacities Strokes Overall Net per length weight Pipe Outer dia. x Thickness Soft wood Hard wood minute 24 mm 12 mm 40 mm x 2 mm 343 mm 1.4 kg (15/16”) (1/2”l (1-518’’ x 5/64”) 2’700 (13-1/2”) (3.
IMPORTANT SAFETY INSTRUCTIONS (For All Tools) WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFE- TY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO SONAL INJURY, INCLUDING THE FOLLOWING: REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PER- READ ALL INSTRUCTIONS. 1.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before turning it on. 15. AVOID UNINTENTIONAL STARTING. Don't carry plugged-in tool with finger on switch. Be sure switch is OFF when plugging in.
IMPORTANT SAFETY INSTRUCTIONS Length of Cord (Feet) AWG Size of Cord I. SAVE THESE INSTRUCTIONS - This manual 25 50 100 150 18 18 18 16 9. Do not operate charger with damaged cord or plug - replace them imme- diately.
ADDITIONAL SAFETY RULES FOR CHARGER & BATTERY CARTRIDGE 1. Do not charge Battery Cartridge when temperature is BELOW 10°C (5OOF) 2. Do not attempt to use a step-up transformer, an engine generator or DC power 3. Do not allow anything to cover or clog the charger vents.
Installing or removing battery cartridge 0 Always switch off the tool before insertion or removal of the battery cartridge. *To remove the battery cartridge, pull out the set plate on the tool and grasp both sides of the cartridge while withdrawing it from the barrel.
If you wish to charge two battery cartridges, allow 15 minutes between chargings on the fast charger. Installing or removing saw blade CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the blade.
After use, return the hex wrench to the storage position. Switch action To prevent the trigger from being acciden- tally pulled, a lock-off lever is provided as a safety feature. To start the tool, slide the lock-off lever in the direction of the arrow and pull the trigger.
Metal cutting Always use a suitable coolant (cutting when cutting metal. Failure to do so cause significant blade wear. oil) will CAUTION: If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery.
OPTIONAL ACCESSORIES The accessories listed in this manual are available at an extra cost from your Makita distributor or Makita factory service center. Service centers are listed on the warranty card packed with your tool. CAUTION : These accessories or attachments are recommended for use with your Makita tool specified in this manual.
fib-19-’91 EN CORDLESS RECIPRO SAW Model 43900 11.
MWEL 43900 ITEM NO. NO. USED MscRIm 16 17 10 19 20 21 22 23 24 26 28 27 36 Fsb-19-’91 EN ITEM NO. NO. USED IwIICR’PTIoN 1 1 1 1 1 1 1 1 1 1 1 0 1 11 12 13 14 16 Dc Motor 9.6 v S”pP0II.r Geer Thin Washer 4 FIet Wa.h.r 4 Nndb &.ring 407 slier P(.
An important point after buying a device Makita 4390DW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Makita 4390DW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Makita 4390DW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Makita 4390DW you will learn all the available features of the product, as well as information on its operation. The information that you get Makita 4390DW will certainly help you make a decision on the purchase.
If you already are a holder of Makita 4390DW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Makita 4390DW.
However, one of the most important roles played by the user manual is to help in solving problems with Makita 4390DW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Makita 4390DW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
