Instruction/ maintenance manual of the product CC19C1MG Magnavox
Go to page of 60
TV CR CC13C1MG CC19C1MG Color TV with built-in VCR Color TV with built-in VCR Owner’s Manual Owner’s Manual.
Once your purchase is registered, you’re eligible to receive all the privileges of owning this prod- uct. So complete and return the Warranty Registration Card enclosed with your purchase at once.
Introduction 3 Features • A-B Repeat Play • Automatic Channel Setup • Automatic Head Cleaner • Automatic Tracking Adjustment • Blue Background • Closed Caption • Daylight-Savings Time .
4 Table of Contents Setting Up Your TV/VCR Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before Using the TV/VCR 5 Using the Remote Control ● Point the remote control at the TV/VCR’s remote sensor. ● Do not put objects between the remote control and the TV/VCR.
6 Hooking Up the TV/VCR ANT. ANT. Hooking Up Your TV/VCR With a Cable Signal or Outdoor Antenna ANT. IN OUT ANT. Connect an RF coaxial cable (75- ohm, not supplied) to the OUT Jack on the Cable Box and to the ANT(enna) Jack on the TV/VCR. Connect a Cable signal or an antenna to the ANT(enna) Jack.
Hooking Up the TV/VCR (cont’d) 7 AUDIO VIDEO STOP EJECT REW PLAY F .FWD REC OTR CHANNEL VOLUME POWER EARPHONE OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. OUT IN VIDEO IN OUT 3CH 4CH AUDIO ANT. VIDEO AUDIO • Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 8 Turning On the TV/VCR Before you turn on the TV/VCR, make sure batteries are in the remote control and you have connected the TV/VCR correctly.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Language Selection 9 Follow the steps below to change the language of the on-screen displays and menus.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 10 Automatic Channel Setup Although the TV/VC.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Automatic Channel Setup (cont’d) 11 4 Press the F.FWD/ B button or the REW(ind)/ { button to select SAVED (to add that channel) or DELETED (to delete that channel).
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 12 Setting the Clock • Entries that do not match the TV/VCR’s calendar will cause a question mark (?) to appear on the screen.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Setting the Clock (cont’d) 13 5 Press two Number buttons for the hour(s) and two Number buttons for the minute(s).
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 14 Setting the Clock (cont’d) Automatic PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Setting the Clock (cont’d) 15 7 When the TV/VCR finds the PBS channel, the time will appear on the screen.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 16 Setting the Clock (cont’d) Manual PBS Channel Selection 4 If ON appears beside AUTO CLOCK, press the MENU button.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Setting the Clock (cont’d) 17 8 When the TV/VCR finds the clock data, the time will appear on the screen.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 18 Daylight-Savings Time 4 Press the PLAY/ ▲ button or the STOP/ ▼ button to select DAYLIGHT SVG.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Time Zone 19 When you set the clock using AUTO CLOCK, specify your time zone. The TV/VCR will maintain the clock according to your time zone.
20 Front Panel AUDIO VIDEO STOP EJECT REW PLAY F .FWD REC OTR CHANNEL VOLUME POWER EARPHONE Cassette Compartment Insert a video cassette tape here. POWER Button Press to turn the power on or off.
Rear Panel 21 ANT . ANT(enna) Jack Connect your antenna or cable here. Details are on page six. Antenna Hole Connect the stem of an indoor antenna here. Details are on page six. AC Power Cord Connect to a standard AC outlet to supply power to the TV/VCR.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR F.FWD/ B Button When tape playback is stopped, press to fast forward the tape at high speed. During tape playback, press to fast forward the tape while the picture stays on the screen.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR TRACKING o / p Buttons Press during tape playback to adjust the tracking. Details are on page 52.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR TO ADJUST PRESS { / B 24 Adjusting the Picture Controls Follow these steps to adjust the TV/VCR’s brightness, picture, color, tint, and sharpness.
Adjusting the Picture Controls (cont’d) 25 Decrease Increase BRIGHTNESS decreased brightness increased brightness PICTURE decreased contrast increased contrast COLOR paler more brilliant TINT more purple more green SHARPNESS softer clearer Press the REW(ind)/ { button to decrease a picture control.
• You cannot view closed captions during recording or tape playback if COUNTER ONLY is ON. Details are on pages 50-51. Helpful Hint 1 Press the MENU button.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Reminder 27 The channel number will remain on the screen at all times when you set REMINDER to ON.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 28 Playing • If the tape you want to play is already in the TV/VCR, turn on the TV/VCR power, then press the PLAY/ ▲ button.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Recording 29 • You cannot record one channel while watching another. • Recording options are on pages 30-36.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 30 One-Touch Recording A One-Touch Recording (OTR) is an immediate timed recording from 30 minutes to eight hours long.
Rerecording (Tape Duplication) 31 • Unauthorized recording of copyright- ed television programs, video tapes, or other materials may infringe on the rights of copyright owners and violate copyright laws. • Different brands of equipment may operate differently.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 32 Timer Recording Follow the steps below to program the TV/VCR to record TV programs while you’re away from home.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR ONE TIME PROGRAM PROGRAM 1 CHANNEL – – .
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 34 Timer Recording (cont’d) Turn off the TV/VCR for the recording. Insert a tape in the TV/VCR.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Timer Recording (cont’d) 35 6 Repeat steps 1-4 to make sure you cleared the correct recording.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 36 Defeat Recording Follow the steps below to prevent accidental recording. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Repeat Play 37 Follow the steps below to program the TV/VCR to play a tape over and over. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select VCR SETUP, then press the F.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 38 A-B Repeat Play • To cancel A-B Repeat Play, set ONE TIME PLAY to ON. To set ONE TIME PLAY to ON, follow steps 2-3 above.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 6 Press the STATUS/EXIT button to remove the menu. A-B REPEAT will appear on the screen. Beneath it, the letter A will flash beside the real-time counter.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 40 Real-Time Counter Memory Follow the steps below to reset the real-time counter to zero at a tape location you want to refer to later.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Playback Options 41 Forward and Reverse Searching (SP/LP/SLP) 1 During tape playback, press and release the F.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 42 SmartLock SmartLock enables parents to prevent their children from watch- ing inappropriate material on TV.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR SmartLock (cont’d) 43 5 Press the PLAY/ ▲ button or the STOP/ ▼ button to select Movie Ratings or Parental Guidelines.
To change the access code, follow these steps. 44 SmartLock (cont’d) 1 Press the MENU button. 2 Press the PLAY/ ▲ button or the STOP/ ▼ button to select SMARTLOCK. Then, press the F.FWD/ B button. SMARTLOCK Enter Your Access Code > SMARTLOCK REVIEW EXIT PRIM.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR SmartLock (cont’d) 45 To check the SmartLock settings and see which ratings you have blocked, follow these steps.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 2 Press the PLAY/ o o button or the STOP/ p p button to select VCR SETUP, then press the F.FWD/ B B button.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 1 Press the SLEEP/WAKE UP button. • To cancel the sleep timer, press the SLEEP/WAKE UP button.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR 48 Wake Up Timer 1 4 2-3 The Wake Up Timer turns on the TV/VCR automatically at a speci- fied time within the next 24 hours.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Usually, the volume bar appears when you press the VOL(ume) o / p buttons. If you do not need it, set the VOLUME BAR to OFF.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR When you watch a program that has closed capt.
POWER EJECT SPEED MEMORY 1 2 3 4 5 6 7 8 9 0 CH. VOL. SLEEP/ WAKE UP ALT.CH REW PLAY F.FWD REC /OTR PAUSE /STILL STOP MUTE TRACKING MENU STATUS/EXIT CLEAR Closed Caption (cont’d) 51 • You cannot view closed captions dur- ing recording or tape playback if COUNTER ONLY is ON.
52 Automatic Operation Features The following playback features will always operate. Automatic Playback When you put a tape in the TV/VCR, the power will come on automatically.
AUDIO In Jack: jack on the front of the TV/VCR which is used to record audio from another source. Automatic Channel Setup: process in which the TV/VCR memorizes all available channels. Then, when you push the CH(annel) o / p buttons, you only scan through channels you receive.
54 Helpful Hints Location For safe operation and satisfactory performance of your TV/VCR, remember the following: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. • Avoid places with insufficient ventilation.
Helpful Hints (cont’d) 55 The remote control is not available, or the remote control will not access the menu. • Use the buttons on the front of the TV/VCR to access the menu. You can not enter numbers (for example, to program a timer recording) using the front panel buttons.
General CRT: 13-inch in line gun (CC13C1MG) 19-inch in line gun (CC19C1MG) Television system: NTSC-M Closed caption system: Section 15.119, FCC (Federal Communications Commission) Standard Video Heads: Two heads Tape width: 1/2 inch (12.65 mm) Tape speed SP: 33.
Limited Warranty 57 WHO IS COVERED? You must have proof of purchase to receive warranty service. A sales receipt or other document showing that you purchased the product is considered proof of purchase. WHAT IS COVERED? Warranty coverage begins the day you buy your product.
a-b repeat play . . . . . . . . .38-39 accessories . . . . . . . . . . . . . . .60 ant(enna) jack . . . . . . . . . . .6, 21 audio in jack . . . . . . . . .7, 20, 31 automatic playback . . . . . . . . . . . . . . .52 rewind . . . . . . . . . . . . . .
.
IB8274E001 Printed In Malaysia 0EMN01769 / T5213UP * * * * * S UPPLIED A CCESSORIES O PTIONAL A CCESSORIES The following items are supplied with your TV/VCR; they are provided to help you use or set up your TV/VCR. The following additional items are not provided with your TV/VCR, but they are designed for use with your new TV/VCR.
An important point after buying a device Magnavox CC19C1MG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Magnavox CC19C1MG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Magnavox CC19C1MG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Magnavox CC19C1MG you will learn all the available features of the product, as well as information on its operation. The information that you get Magnavox CC19C1MG will certainly help you make a decision on the purchase.
If you already are a holder of Magnavox CC19C1MG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Magnavox CC19C1MG.
However, one of the most important roles played by the user manual is to help in solving problems with Magnavox CC19C1MG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Magnavox CC19C1MG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
